Novel Electroless Deposition of Cu<Subscript>3</Subscript>Se<Subscript>2</Subscript> Film on Silicon Substrate by a Simple Galvanic Displacement Process

A novel electroless deposition method for depositing highly uniform adhesive thin films of copper selenide (Cu₃Se₂) on silicon substrates from aqueous solutions is described. The deposition is carried out by two coupled galvanic reactions in a single deposition bath containing copper cations, hydrogen fluoride, and selenous acid: the galvanic deposition of copper on silicon and the subsequent galvanic reaction between the deposited copper with selenous acid in the deposition bath. The powder X-ray diffraction and scanning electron microscopy are used to characterize and examine the deposited films.     

Simultaneous determination of theophylline,tolbutamide, mephenytoin,debrisoquin, and dapsone in human plasma using high‐speed gradient liquid chromatography/tandem mass spectrometry on a silica‐based monolithic column

Theophylline, tolbutamide, mephenytoin, debrisoquin, and dapsone are marker substrates for CYP1A2, CYP2C9, CYP2C19, CYP2D6, and CYP3A4, respectively. A silica‐based monolithic column (Chromolith SpeedROD RP‐18e, 50×4.6 mm) was used to separate these five marker substrates of cytochrome P450 within only 84 s. Linear gradient elution was from acetonitrile‐water‐formic acid (10 : 90 : 1, v/v/v) to acetonitrile‐water‐formic acid (90 : 10 : 1, v/v/v) in 1.4 min. The flow rate was 2.5 mL/min. The retention time was 0.52 min for theophylline, 0.67 min for debrisoquin, 0.78 min for dapsone, 0.96 min for mephenytoin, and 1.13 min for tolbutamide. Detection was by tandem mass spectrometry using a PE Sciex API 3000 mass spectrometer with a Turbo‐Ionspray source in positive mode. A simple protein precipitation method was used. This method was validated over the concentration range of 5–2000 ng/mL based on the sample volume of 0.1 mL.     

微波辐射-酶耦合催化(MIECC)反应

将微波辐射用于非水相酶催化可以获得很多有别于常规加热下的反应结果.本文讨论了微波的非热效应在酶促反应中的表现,探讨了微波辐射对酶的结构、构象、活性及酶催化反应动力学的影响,以及微波辐射-酶耦合催化对反应的对映选择性、底物专一性、前手性选择性和区域选择性的影响.在大多数场合,适当的微波辐射不会损伤酶活而且可以提高反应速率,而对酶特异性的影响则不一而论.     

Rheological Behavior for Mica-filled Polypropylene Composite Melts

The study on rheological properties of a series of mica-filled polypropylene (PP) composites was carried out. The influence of surface-treatment of mica particles on dynamic rheological behavior of the composites were dealt with. The viscosity (η) and dynamic modulus ( G‘ ) of the composite melts were higher than those of PP matrix, especially those for systems treated with silane, which was attributed to the interfacial adhesion enhancement. However, surface-treatment of mica by titanate resulted in lower η and G‘, as compared with the treatment by silane. The reason for this is believed to be the formation of the mono-molecular layer on the mica surface.     

Reverse zymography using fluorogenic substrates for protease inhibitor detection

A novel, sensitive method for detecting protease inhibitors by using fluorescent protease substrates in gels is described. The protease inhibitors were separated on sodium dodecyl sulfate (SDS)-polyacrylamide gels containing a copolymerized peptide substrate, namely 4-methyl-coumaryl-7-amide (MCA). As the incorporated substrates in the gel, Boc-Phe Ser-Arg-MCA was used for trypsin, Suc-Ala-Ala-Pro-Phe-MCA for alpha-chymotrypsin, and Z-Phe-Arg-MCA for papain. After electrophoresis, washing and incubating the gel with the target protease solutions allowed the substrate to be cleaved by the protease, and the release of the fluorescent 7 amino-4 methyl-coumarin (AMC), which was detected under a UV transilluminator. The uncleaved peptide-MCA substrate remained where the inhibitors were present, and was visualized as dark blue bands on the light-green fluorescent background gel. This new method offers several advantages over other previous methods including: (i) greatly increased sensitivity can be achieved in a shorter period of time, which may be useful for discovering new protease inhibitors in small amounts of crude material; (ii) the procedure is quite simple and quick since the incubation period is very short and no time is needed for staining and destaining steps; (iii) since these probes using substrate specificity/target proteases, they are excellent tools for detection and discrimination of unknown protease inhibitors for various target proteases.     

金属基底上吡咯光电化学聚合的研究

近年来,国内外对聚吡咯已进行广泛的研究,主要内容包括:电化学聚合,机理与结构表征,电化学氧化还原性质,聚吡咯的化学修饰。最近报导了半导体上吡咯的光电化学聚合。我们在低于吡咯电聚合电位下观察到聚吡咯的Raman讯号。本文研究在中性溶液中金属基底上吡咯的光电化学聚合,以及光源波长、强度和介质等因素的影响。     

Some novel layered-silicate nanocomposites based on a biodegradable hydroxybutyrate copolymer

This paper describes the preparation, characterization, mechanical properties and thermal stability of layered silicate nanocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHB-co-PHH, known as Nodax^TM). The dispersed phases were organically modified montmorillonites (clay 20A and clay 25A), mica, and talc, and they were introduced by solution mixing. Wide-angle X-ray scattering results and transmission electron microscopy (TEM) images confirmed that these two clays were intercalated and finely distributed in the Nodax^TM matrix. This type of layered filler led to remarkable improvements in mechanical properties even at very low loadings. Minimizing aggregation was more of a problem in the case of the mica and the talc, at least in this particular matrix. In some cases, these layered fillers slightly decreased the thermal stability of the Nodax^TM.     

Kinetics, selectivity, and mechanism of the reactions of arenes with adamantyl carbocations in sulfuric acid

Data on the kinetics, selectivity, kinetic isotope effect, and the effect of the acidity of the medium on the rate of the reactions of benzene and alkylbenzenes in sulfuric acid (59–78 wt.% H₂SO₄) solutions of 1-adamantanol at 30 °C indicate that the direct reagents are the adamantyl carbocations (Ad⁺) that alkylate the arenes. The ortho positions of the benzene ring are not accessible on account of steric hindrances. The rate of attack by the Ad⁺ cation on the accessible para and meta positions of the ring is controlled by the formation of a σ complex. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 1, pp. 14–18, January–February, 2006.     

金属载体催化剂的涂层研究

在高温氧化处理不同时间的金属载体箔片上涂覆MgAl2O4/Al2O3过渡涂层,利用TG-DSC,XRD,SEM,BET和超声振动等分析测试技术,对载体和涂层的微观结构与表面特性进行研究.结果表明,在950 ℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力.在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散.     

Electrochemical technique for the determination of fractal dimension of dental surfaces

Fractal dimension of a carious tooth surface was determined using an electrochemical method. The method was based on time-dependent diffusion towards electrode surfaces, which is one of the most useful and reliable methods for the determination of fractal dimension of electrode surfaces. For this purpose, the tooth was covered with a gold layer, which acted as an electrode in electrochemical experiments. It is suggested that the fractal dimension can be used as a quantitative measure of the state of dental surfaces. The method presented demonstrates the power of electrochemical techniques for the determination of fractal dimension of surface of non-conducting objects.