Characteristics of Heterophase Graft Copolymerizations

Abstract

Persulfate-initiated graft copolymerizations of glutaraldehyde crosslinked gelatin with acrylic acid, acrylamide, vinyl acetate, and methyl methacrylate in the aqueous phase were investigated. It was observed that percentage grafting, molecular weights of the grafts, and grafting efficiencies were greatly influenced by the nature of the monomers. Hydrophilic monomers gave a higher frequency of grafting but lower molecular weights. While the frequency of grafting with hydrophobic monomers was low, the molecular weights of the grafts were comparatively high. The results are explained in terms of microdomain kinetics, similar to those encountered in emulsion or suspension polymerizations.     

Synthesis and Application of Epoxidized Natural Rubber

Abstract

North Vietnamese NR latexes were successfully epoxidized using peracetic acid at moderate temperature and pH range. The epoxide contents of pure epoxidized natural rubber (ENR) are from 5 to 70 mol%. The ENR products were characterized and determined by spectral and thermal analysis besides the chemical titration. Conditions of longlasting or excessive temperature, or high acidic pH led to side ring opened products, proved easily by IR, ¹H-NMR, and DSC analysis. The ENR were vulcanized using a semiefficient system. The epoxidation increased the adhesion between rubber and tire cord and metal. This effect becomes stronger beyond 25 mol% and tends to be limited at over 60 mol%. The ENRs were used to formulate special-purpose adhesives. The shear strength of the adhesive ranges from 32 to 45 kg/cm² for bonding rubber to nylon and rubber to metal, respectively.     

Radical Copolymerization of Vinylidene Chloride with 3(2-Methyl)-6-methylpyridazinone in Several Solvents

The radical copolymerization of vinylidene chloride (Vc, M₁) with 3(2-methyl)-6-methylpyridazinone (I, M₂) was carried out in benzene, ethanol, phenol, and acetic acid at 60 and 80°C. The monomer reactivity ratios were found to vary with the reaction conditions. The linear correlationships were obtained by plotting the values of log r₁ against those of ^V C[dbnd]O and ^V C[dbnd]C of monomers determined in the solvents.     

Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.     

Introduction of C-Sulfonate Groups into Disaccharide Derivatives

To prepare C-sulfonate derivatives of disaccharides two different strategies were followed. Thus 6- and 6′-C-sulfocellobiosides 4 and 10–12 were prepared starting from a suitably protected cellobioside. The 6′-C-sulfoaminocellobioside 18 was prepared by construction of the molecule through a glycosylation reaction. In both cases, the synthetic pathway involves regioselective tosylation, introduction of a sulfur atom by nucleophilic displacement with potassium thioacetate and oxidation with hydrogen peroxide.     

Reactivity Ratios of Butyl Acrylates in Radical Copolymerization with Methacrylates

The reactivity ratios of four butyl acrylates versus methyl methacrylate and tert-butyl methacrylate were determined for their radical copolymerization in 2-butanone solution using the Jaacks method. The reactivity ratios values obtained were positively verified by substituting into the Alfrey-Goldfinger equation, yielding correct copolymer composition for a series of samples obtained from different initial mole fractions of the comonomers.     

Efficient removal of crystal violet and methylene blue from wastewater by ultrasound nanoparticles Cu-MOF in comparison with mechanosynthesis method

The present investigation reports the synthesis of CuBTC (BTC = 1,3,5-benzenetricarboxylate) metal–organic frameworks (MOFs) under solid-state conditions and ultrasound irradiation. Herein, we study uptake and release properties of crystal violet (CV) and methylene blue (MB) from ultrasound nano-CuBTC MOF in comparison with mechanosynthesis method (bulk structure). The ultrasound-assisted methods give a decrease in the surface area as calculated from the reduced nitrogen adsorption capability. In comparison, the uptake of guest molecules on ultrasound nano-CuBTC is remarkable and clearly exceeds that of bulk structure in the aqueous solution of guests. In bulk compound the channel length is increased so that the amount of adsorption is decreased a little. The small guest enters and leaves the cavity rapidly, whereas larger guests enter slowly due to their size relative to the size of the gaps in the capsule. As a result, the uptake and release of MB from CuBTC is faster than that of CV.     

Hydrogen production and photocatalytic activity of g-C3N4/Co-MOF (ZIF-67) nanocomposite under visible light irradiation

Herein, cobalt (Co)-based metal–organic zeolitic imidazole frameworks (ZIF-67) coupled with g-C₃N₄ nanosheets synthesized via a simple microwave irradiation method. SEM, TEM and HR-TEM results showed that ZIF-67 were uniformly dispersed on g-C₃N₄ surfaces and had a rhombic dodecahedron shape. The photocatalytic properties of g-C₃N₄/ZIF-67 nanocomposite were evaluated by photocatalytic dye degradation of crystal violet (CV), 4-chlorophenol (4-CP) and photocatalytic hydrogen (H₂) production. In presence of visible light illumination, the photocatalytic dye results showed that 95% CV degradation and 53% 4-CP degradation within 80 min. The H₂ production of the g-C₃N₄/ZIF-67 composite was 2084 μmol g⁻¹, which is 3.84 folds greater than that of bare g-C₃N₄ (541 μmol g⁻¹).