Study on the Tautomer Interconversion of 3-Oxo Pentanoate During Gas Chromatography

Enol and keto tautomers of methyl 3-oxo pentanoate could be separated on a HP-5 capillary column. The chromatographic peaks were identified by examining characteristic mass ions arose from the corresponding enol and keto molecular ions. The study showed that the area percentage of enol tautomer is a function of temperature of the column. Treating the column as a reactor, the energy of activation for the on-column tautomerization could be extracted (35.1 kJ mol⁻¹) by monitoring the loss of the enol tautomer, because the reaction is found to obey pseudo first-order kinetics. The enthalpy and the entropy changes (ΔH = −3.98 kJ mol⁻¹, ΔS = −7.89 J K⁻¹mol⁻¹) for the enol-to-keto reaction in the stationary phase were also obtained.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Determination of cationic polyelectrolytes using a photometric titration with crystal violet as a color indicator

The reaction of the cationic dye, crystal violet (CV) with the anionic polyelectrolytes such as potassium poly (vinyl sulfate) (PVSK) results in a decrease of the absorbance of CV at the maximum absorption wavelength (590 nm). This change of the absorption spectra of the CV has been already applied to the determination of anionic polyelectrolytes using flow injection analysis method. In this paper, CV was applied to the indicator for the determination of cationic polyelectrolytes such as poly (diallyldimethylammonium chloride) (Cat-floc) by photometric titration, using a PVSK solution as a titrant. The end-point of the titration is detected as the break point of the titration curve. A linear relationship between the concentration of cationic polyelectrolyte and the end-point volume of the titrant exists in the concentration range from 0 to 5×10⁻⁵ eq. mol dm⁻³ for Cat-floc, glycol chitosan and methylglycol chitosan. The effects of the concentration of CV and coexisting electrolytes in the sample solution and the effect of pH of the sample solution on the degree of the change of absorbance at the end-point were also examined.     

BARRIER PROPERTIES OF VINYLIDENE CHLORIDE/METHYL ACRYLATE COPOLYMER

A series of vinylidene dichloride (VDC) copolymers with methyl acrylate (MA) ascomonomer (3--12wt%), was prepared by free-radical suspension copolymerization. Thepermeability coefficients of the copolymers to oxygen and carbon dioxide were measured at1.0 MPa and at 30℃, and those to water vapor were measured at 30℃ and 100% relativehumidity All the VDC/MA copolymers studied are semicrystalline. As the MA contentincreases, the permeability coefficients of the copolymers to oxygen, carbon dioxide, andwater vapor are progressively increased, caused by decrease in crystalline fraction andincrease in free volume of VDC/MA copolymers.     

甲基化的β-环糊精与十六烷基三甲基溴化胺的相互作用

环糊精与表面活性剂的相互作用已有许多研究,但多局限于β－环糊精（β－CD）,而修饰的β－环糊精与表面活性剂的相互作用研究较少[1－3]．分子内扭转电荷转移（TICT）激发态对介质极性高度敏感性,已成功地用于探针环糊精与表面活性剂的相互作用[4]．研究表明,β－CD能够诱     

Voltammetric Determination of Trace Amounts of 2‐Methyl‐4,6‐Dinitrophenol at a Silver Solid Amalgam Electrode

The voltammetric behavior of 2‐methyl‐4,6‐dinitrophenol was investigated by differential pulse voltammetry (DPV) at a nontoxic mercury meniscus‐modified silver solid amalgam electrode (m‐AgSAE). Conditions have been found for its determination by DPV at m‐AgSAE in the concentration range of 0.2 to 1 μmol L^?1.     

Identification of cis/trans isomers of methyl ester and oxazoline derivatives of unsaturated fatty acids using GC–FTIR–MS

Identification of cis/trans isomers of unsaturated fatty acids cannot usually be achieved by GC-MS (gas chromatography-mass spectrometry) without reference substances. In this study a GC-FTIR-MS system (gas chromatography-Fourier transform-mass spectrometry) was used to identify fatty acid methyl esters (FAMEs) and differentiate between the cis/trans isomers. Besides methyl esters, 2-alkenyl-4,4-dimethyloxazoline derivatives (DMOX), which have been used to locate double bond positions of unsaturated fatty acids, were examined with respect to their suitability for cis/trans differentiation. A combined GC-FTIR-MS system with a wide band (4000–550 cm^?1) mercury cadmium telluride (MCT) detector was used in series and parallel to identify 31 reference unsaturated fatty acids, including 7 pairs of cis/trans isomers. Serum samples of healthy persons and commercially available fish oil were analyzed as examples of complex mixtures. Using splitless injection the detection limit for the less sensitive IR detector was 25 ng/μl in case of the weak cis and trans bands. In the FTIR spectra cis/trans isomers were identified by analysis of bands arising from C? H out-of-plane (oop) bending: for both the FAME and DMOX derivatives cis-1,2-disubstituted double bonds give a strong band near 720 cm^?1 and the corresponding trans isomers near 967 cm^?1. cis Isomers could be identified further by a band at 3012 cm^?1. With the combined data of the GC-FTIR-MS system it is now possible to identify polyunsaturated fatty acids with regard to the discrimination of cis/trans isomers.     

Analysis of Toxic Aluminium Species in Natural Waters

Aluminium is known to be toxic to a wide range of aquatic organisms under certain conditions. Monomeric hydroxy ions have been found to be primarily responsible for aluminium aquatic toxicity.A survey of aluminium toxicity and a brief discussion of speciation schemes are presented. The fast reaction of Al³⁺ with pyrocatechol violet (PCV) followed by spectrophotometric analysis is a frequently used method for aluminium speciation. By using a flow system, one obtains fairly exact and reproducible control of the reaction time, and as a result it provides a direct method of analysis for free aluminium (including inorganic monomeric aluminium).The PCV-method has been adapted for the determination of aluminium in carbonate-rich natural waters using an improved buffering system. Thus it is possible to monitor aluminium concentrations in lake water as well as in pore water of the sediments of eutrophicated hardwater lakes that has been treated with aluminium salts as a restoration measure.     

无机阴离子的毛细管电泳分析

本文研究了常见无机阴离子的毛细管电泳规律，考察了分离电压、电解质熔液组成、浓度、ｐＨ值等对分离的影响，建立了高效、快速的无机阴离子毛细管电泳分析方法。在选定的实验条件下，各种常见无机阴离子在５ｍｉｎ内达到完全分离，对Ｂｒ＾－和Ｃｌ＾－的分离柱效每米可达７６万理论板数。迁移时间的相对标准偏差小于１％，峰面积的相对标准偏差小于５％，各离子的最低检测浓度为０．０５￣０．５μｇ／ｍｌ。     

A new route for the functionalisation of wood through transesterification reactions

A novel transesterification reaction between acetylated maritime pine sapwood (Pinus pinaster Soland) and methyl benzoate (MB), in the presence of dibutyltin oxide (DBTO) as a catalyst, was performed. Reaction was confirmed by Fourier-transform infrared spectroscopy (FTIR) and ¹³C nuclear magnetic resonance cross-polarisation with magic-angle spinning (NMR CP MAS) analysis: signals corresponding to benzoylated wood were identified and, when transesterification was performed with ethyl trimethylsilylacetate (ETMSA), characteristic trimethylsilyl groups were detected. The acetyl/benzoyl exchange rate was found to increase with increasing amount of DBTO, temperature and reaction time and a concurrent deterioration of the woody material was evidenced.