Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

Multiple bonds between main group elements and transition metals, 155. (Hexamethylphosphoramide) methyl(oxo) bis(η-peroxo)rhenium(VII), the first example of an anhydrous rhenium peroxo complex: crystal structure and catalytic properties

Methyl(oxo)bis(η²-peroxo)rhenium(VII)1, the active species of the system CH₃ReO₃/H₂O₂ in the catalytic oxidation of different organic and organometallic compounds, is stabilized by a water molecule attached to the rhenium center. This water molecule can be removed and substituted by hexamethylphosphoramide (HMPA) to yield (hexamethylphosphoramide)methyl(oxo)bis(η²-peroxo rhenium(VII) (3). The synthesis, crystal structure (X-ray difraction study), and catalytic properties of which compound are reported. Crystal data are as follows: monoclinic, space group P2₁/n, A = 900.76(7) pm, B = 1229.80(11) pm, C = 1318.57(11) pm, β = 90.251(7)°, R_w = 0.034 for 1878 reflections. The catalytic properties of compound 3 in the oxidation of olefins with H₂O₂ are similar to those of 1.     

DABCO-catalyzed reactions of hydrazones with activated olefins

This paper describes several highly efficient DABCO-catalyzed aza-Michael addition reactions of hydrazones to activated olefins. In most cases, these aza-Michael addition reactions gave the corresponding products in high yields under mild conditions. The plausible reaction mechanism is discussed on the basis of deuterium labeling experiments. Upon treatment with HCl, the corresponding cyclized products can be obtained in high yields from the Michael addition products.     

氧化-还原低温引发甲基丙烯酸甲酯/丙烯酸丁酯超浓乳液聚合研究

以乳化剂十二烷基硫酸钠 (SDS)和共乳化剂十六烷醇 (HD)作为复合乳化体系 ,过氧化二苯甲酰(BPO)和N ,N 二甲基苯胺 (DMA)作为氧化还原引发体系 ,甲基丙烯酸甲酯 丙烯酸丁酯 (MMA BA)作为混合单体 ,制备了分散相占 83 %以上的稳定的超浓乳液 ,然后在低温下引发聚合 .探讨了引发剂浓度、氧化剂与还原剂的摩尔比、乳化剂的浓度、液膜增强剂的种类、聚合温度等因素对聚合稳定性和聚合速率的影响 ,测定并计算得到了聚合速率的公式 ;用激光散射粒度分布仪测定了聚合物乳胶粒子的大小及粒径分布 ,用透射电子显微镜观察了聚合物乳胶粒的形态 ,讨论了乳化剂浓度、聚合温度等对乳胶粒形态、大小的影响     

A characteristic CH band in VCD of methyl glycosidic carbohydrates

Novel vibrational circular dichroism (VCD) studies in the CH region of a series of methyl glycosidic carbohydrates were examined. The specific CH stretching VCD band predicts absolute stereochemistries of their anomeric positions. The C-1 chiral information was extracted to the methoxy substituent as a probe. The concept of the vibrational chirality probe from a single chiral center in the presence of numerous such centers might be useful in determining the absolute configuration, when a multiplicity of chiral centers is present in a molecule such as a carbohydrate.     

痕量铁的光化学伏安分析法及其应用研究

在稀硫酸介质中及活化剂草酸存在下，痕量铁（Ⅲ）对结晶紫光化学褪色反应有强烈催化作用，结晶紫的光化学反应产物于－０．７０产生一灵敏的２．５次微分级谱波。     

Phase equilibria for binary systems of octane boosters with 2,2,4-trimethylpentane

Isobaric vapor–liquid equilibrium data at 95.96 kPa for the three binary systems of 2,2,4-trimethylpentane with methyl tert-butyl ether, di-isopropyl ether and dimethoxymethane are determined. A Swietoslawski type ebulliometer is used for the measurements. The experimental T–x data are used to estimate Wilson parameters and the parameters, in turn, are used to calculate vapor phase compositions and activity coefficients. All the systems studied here do not exhibit azeotropes and behave like non-ideal solutions.     

疏水相互作用对阳离子聚电解质与染料键合的影响

用平衡渗析法研究了阳离子聚电解质PAm·MG 和P(St-Am·MG)与甲基橙(MO)及P(St-Am·MG)与MO的同系物乙基橙(EO)、橙武Ⅳ(O-Ⅳ)在25、35、45和55 ℃下相互作用的热力学. 由K1otz方程, 求得键合常数K_1和热力学参数ΔG、ΔH及ΔS. 含疏水基的P(St-Am·MG)与MO的键合能力比不含疏水基的PAm·MG 强. P(St-Am·MG)与不同染料作用时, 键合程度为O-Ⅳ>EO>MO, 即染料的疏水性越强, 与高聚物的作用程度越大.键合体系加入脲或甲醇, 疏水相互作用受到破坏, 导致高聚物与染料之间的键合受到削弱.     

硝酸甲酯分子间相互作用的DFT和ab initio比较

用密度泛函理论(DFT)和从头算(ab initio)方法,分别在B3LYP/6 31G和HF/6 31G水平上求得硝酸甲酯三种二聚体的全优化几何构型和电子结构,并用6 311G和6 311＋＋G基组进行总能量计算.对HF/6 31G计算结果进行MP4SDTQ电子相关校正.在各基组下均进行基组叠加误差(BSSE)和零点能(ZPE)校正求得结合能.对6 31G优化构型作振动分析并基于统计热力学求得200～600 K温度下单体和二聚体的热力学性质.详细比较两种方法的相应计算结果,发现DFT求得的分子间距离较短,分子内键长较长,所得结合能均小于相应ab initio计算值.     

Optimization of the separation of malachite green in water by capillary electrophoresis Raman spectroscopy (CE-RS) based on the stacking and sweeping modes

A capillary electrophoresis Raman spectroscopy (CE-RS) method based on the stacking and sweeping modes are described. A non-fluorescent compound (malachite green, MG; crystal violet, CV) and a doubled Nd:YAG laser (532 nm, 300 mW) were selected as the model compound and light source, respectively. In order to carry out a quantitative and analysis of MG, a monochromator was used to collect the specific Raman line at 1616 cm⁻¹ (the N-φ and C-C stretching, corresponding to 582 nm when the wavelength of the exciting source is 532 nm). The limit of detection (LOD) for MG was 1.6 × 10⁻⁵ and 1.1 × 10⁻⁵ M, respectively, based on the CZE and MEKC modes. This could be improved to 3.4 × 10⁻⁷ and 5.3 × 10⁻⁹ M, respectively, when the stacking and sweeping modes were applied. The method was also extended to the determination of MG in an actual sample.