Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

The study of the partitioning mechanism of methyl orange in an aqueous two-phase system

An aqueous two-phase system of dodecyl triethylammonium bromide (C₁₂NE, cationic surfactant) and sodium dodecyl sulfate (SDS, anionic surfactant) mixture is proposed for the extraction of some dyes and porphyrin compounds. Transparent two phase-systems are formed when the surfactant concentrations and C₁₂NE/SDS ratios are in certain regions. In this study, the aqueous two phase-systems were prepared by mixing 0.1 mol l⁻¹ C₁₂NE and SDS with a molar ratio of 1.7:1.0. The results showed that negatively charged chlorophyll (sodium copper chlorophyllin) and positively charged dye (methyl violet) were efficiently extracted into the upper phase. The negatively charged methyl orange (pH>7) was moved into the upper phase mostly while amphoteric methyl orange (pH<3) was distributed in the two phases uniformly. Except for hydrophobic force, charge interaction between solute and surfactant also play an important role in the extraction process.     

NBR/ORGANOMODIFIED BENTONITE INTERCALATED HYBRIDS AND THEIR EFFECTS ON THE TOUGHNESS OF PVC

Hybrids of intercalative nitrile-butadiene rubber/organomodified bentonite (NBR/OMB) were prepared by thelatex intercalation technique. Investigation of their mechanical properties and the microstructore of NBR/OMB showed thatthe organomodified bentonite is an effective toughener for NBR. Transmission electronic microscopy (TEM) and X-rnydiffraction (XRD) tests showed that the NBR macromolecule could be intercalated into the galleries of bentonite.Incorporation of NBR/OMB hybrids as tougheners into poly(vinyl chloride) (PVC) results in a substantial increase in theimpact strength of PVC, but little decrease in its tensile strength and flexural strength, compared to the unmodified PVC.     

乙烯系单体自由基聚合的阻聚效应——Ⅸ.受阻胺-醌类电荷转移络合物对甲基丙烯酸甲酯自由基聚合的阻聚及历程

用膨胀计法研究了西氯苯醌(CA)、苯醌(BQ)与受阻胺二异丙胺(DIPA)、2,2,6,6-四甲基-4-羟基哌啶(TMP)形成的电荷转移络合物(CTC)对偶氮二异丁腈(AIBN)引发的甲基丙烯酸甲酯(MMA)自由基聚合阻聚效应。结果表明,CA-DIPA、CA-TMP、BQ-DIPA和BQ-TMP对MMA的自由基聚合均产生较单独的醌或胺更显著的阻聚能力。其中以CA-DIPA阻聚效果更佳。比较了MMA在苯或乙腈中的溶液聚合,得类似结果。初步讨论了受阻胺-醌电荷转移络合物对MMA自由基聚合的阻聚反应机理。     

Williamson法合成两亲性聚醚砜酮-聚乙二醇接枝共聚物

含二氮杂萘酮结构的聚醚砜酮(PPESK)是一种新型的耐热可溶解工程塑料,其玻璃化温度高达263~305℃,可用来制造耐高温气体分离、超滤和纳滤膜,表现出优异的综合性能[1~4].然而,膜材料本身的疏水特性使PPESK膜在过滤操作中易遭受膜污染,导致膜性能下降,对膜材料进行亲水化改性以抑     

甲基橙褪色动力学光度法测定槲皮素的研究

基于稀H2SO4介质中,槲皮素对KBrO3氧化甲基橙褪色反应的明显催化作用,建立了测定痕量槲皮素的动力学光度法。在选定的条件下,方法的线性范围为0~0.05 mg/L,表观摩尔吸光系数为4.52×106L.mol-1.cm-1,检出限为0.0012 mg/L。利用此法测定了银杏叶和中药制剂慢严舒柠中的槲皮素,加标回收率为95%~106.7%,相对标准偏差小于3.3%。     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Synthesis of polypiperazine-amide thin-film membrane on PPESK hollow fiber UF membrane

A new interfacial polymerization (IP) procedure is developed in order to synthesize polypiperazine-amide thin-film membrane on the inner surface of poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber ultrafiltration (UF) membrane.A hollow fiber composite membrane with good performance was prepared and studied by FT-IR and scanning electron microscopy.