Alternative solvent‐based methyl benzoate vortex‐assisted dispersive liquid–liquid microextraction for the high‐performance liquid chromatographic determination of benzimidazole fungicides in environmental water samples

Vortex‐assisted dispersive liquid–liquid microextraction using methyl benzoate as an alternative extraction solvent for extracting and preconcentrating three benzimidazole fungicides (i.e., carbendazim, thiabendazole, and fluberidazole) in environmental water samples before high‐performance liquid chromatographic analysis has been developed. The selected microextraction conditions were 250 μL of methyl benzoate containing 300 μL of ethanol, 1.0% w/v sodium acetate, and vortex agitation speed of 2100 rpm for 30 s. Under optimum conditions, preconcentration factors were 14.5–39.0 for the target fungicides. Limits of detection were obtained in the range of 0.01–0.05 μg/L. The proposed method was then applied to surface water samples and the recovery evaluations at three spiked concentration levels of 5, 30, and 50 μg/L were obtained in the range of 77.4–110.9% with the relative standard deviation <7.4%. The present method was simple, rapid, low cost, sensitive, environmentally friendly, and suitable for the trace analysis of the studied fungicides in environmental water samples.     

Removal of Anionic Dyes from Aqueous Solution with Layered Cationic Aluminum Oxyhydroxide

It is highly desired yet challenged to find an adsorbent with low cost and excellent performance in the removal of organic dyes from aqueous solution. Here we reported that a layered cationic aluminum oxyhydroxide material hydrothermally synthesized from the low-cost source materials of AlCl₃∙6H₂O, CaO and H₂O, known as JU-111, can meet such criterion in removing methyl orange(MO) and Congo red(CR). JU-111 shows fast adsorption kinetics[especially for CR(15 s)] and high adsorption capacity(MO:>1000 mg/g; CR:>2900 mg/g), surpassing most of the reported adsorbents. Comprehensive characterizations of the adsorption process of MO and CR revealed that both adsorptions were achieved via the anion exchange process. The characteristics of extremely low cost and excellent performance render JU-111 great potential in the practical applications in the removal of anionic dyes.     

Prebiotic Route to Thymine from Formamide—A Combined Experimental–Theoretical Study

Synthesis of RNA nucleobases from formamide is one of the recurring topics of prebiotic chemistry research. Earlier reports suggest that thymine, the substitute for uracil in DNA, may also be synthesized from formamide in the presence of catalysts enabling conversion of formamide to formaldehyde. In the current paper, we show that to a lesser extent conversion of uracil to thymine may occur even in the absence of catalysts. This is enabled by the presence of formic acid in the reaction mixture that forms as the hydrolysis product of formamide. Under the reaction conditions of our study, the disproportionation of formic acid may produce formaldehyde that hydroxymethylates uracil in the first step of the conversion process. The experiments are supplemented by quantum chemical modeling of the reaction pathway, supporting the plausibility of the mechanism suggested by Saladino and coworkers.     

Development of highly ionic conductive cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co-methyl methacrylate) graft copolymer membranes

A novel cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer was prepared via free radical polymerization for the first time. The chemical structure of the graft copolymer was confirmed using FT-IR, ¹H NMR and EDX. The TGA and DSC investigated the thermal changes. Factors affecting the grafting process were studied and various grafting characteristic parameters such as grafting efficiency (%), grafting yield (%) and add-on value (%) were determined. Flexible membranes based on different graft copolymer compositions were fabricated by simple solution casting. Physicochemical properties including ion exchange capability (IEC), water uptake (WU) and proton conductivity (σ) were evaluated. These membranes demonstrated higher IEC, WU and conductivity than the pristine CA. The maximum proton conductivity of the CA-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer membrane (68%; Add-on %) was found to be 6.44 × 10⁻³ S/cm compared with 0.035 × 10⁻³ S/cm of the pristine CA. Thus, the appropriate graft copolymer composition will allow fine-tuning of the physical characteristics and led to several potential applications, such as polyelectrolyte fuel cells membranes or biodiesel production.     

Development of Biosensor for Catechol Using Electrosynthesized Poly(3‐methylthiophene) and Incorporation of LAC Simultaneously

Simultaneous electropolymerization of 3‐methylthiophene and incorporation of Laccase (LAC) was carried out in the presence of propylene carbonate as a medium by amperometric method. This enzyme modified electrode was used for the sensing of polyphenol. Catechol is taken as a model compound for the study. UV‐Vis spectral studies suggest no denaturation of LAC in presence of propylene carbonate. The SEM studies reveal the surface morphology and incorporation of LAC in P3MT with agglomerated flaky masses are observed in with and without enzyme micrographs. The cyclic voltammograms were recorded for 0.01 mM catechol on plain glassy carbon, polymer and enzyme incorporated electrodes at pH 6.0 and scan rate 50 mV s^?1. The fabricated electrochemical biosensor was used for the determination of catechol in aqueous solution by Differential Pulse Voltammetry (DPV) technique. The concentration linear range of 8×10^?8 to 1.4×10^?5 M a value of Michealis? Menten constant K_m=7.67 µmol dm^?3 and activation energy is 32.75 kJ mol^?1. It retains 83 % of the original activity after 60 days which is much higher than that of other biosensors. The developed biosensor was used to quantify catechol in the determination in real samples.     

Selective Generation of Formamides through Photocatalytic CO2 Reduction Catalyzed by Ruthenium Carbonyl Compounds

The selective formation of dialkyl formamides through photochemical CO₂ reduction was developed as a means of utilizing CO₂ as a C₁ building block. Photochemical CO₂ reduction catalyzed by a [Ru(bpy)₂(CO)₂]²⁺ (bpy: 2,2′‐bipyridyl)/[Ru(bpy)₃]²⁺/Me₂NH/Me₂NH₂⁺ system in CH₃CN selectively produced dimethylformamide. In this process a ruthenium carbamoyl complex ([Ru(bpy)₂(CO)(CONMe₂)]⁺) formed by the nucleophilic attack of Me₂NH on [Ru(bpy)₂(CO)₂]²⁺ worked as the precursor to DMF. Thus Me₂NH acted as both the sacrificial electron donor and the substrate, while Me₂NH₂⁺ functioned as the proton source. Similar photochemical CO₂ reductions using R₂NH and R₂NH₂⁺ (R=Et, nPr, or nBu) also afforded the corresponding dialkyl formamides (R₂NCHO) together with HCOOH as a by‐product. The main product from the CO₂ reduction transitioned from R₂NCHO to HCOOH with increases in the alkyl chain length of the R₂NH. The selectivity between R₂NCHO and HCOOH was found to depend on the rate of [Ru(bpy)₂(CO)(CONR₂)]⁺ formation.     

无碱条件下Au/ZnO选择性催化氧化1,3-丙二醇合成3-羟基丙酸甲酯

采用溶胶-沉积法合成了高选择性的Au/ZnO催化剂,用于1,3-丙二醇选择性氧化酯化为3-羟基丙酸甲酯的反应.研究了保护剂PVA用量、金溶胶合成温度、金负载量及催化剂循环利用对反应的影响,且优化了反应温度和反应压力,并对催化剂进行了XRD和TEM表征.结果表明,PVA∶Au(m/m)=1∶4、金溶胶合成温度25℃、金负载量1%的Au/ZnO对目标反应的催化活性最好,在100℃和Po2=2MPa的条件下1,3-丙二醇的转化率达82.8%,产物3-羟基丙酸甲酯的选择性达95.4%.Au纳米粒子的粒径影响催化性能,在Au平均粒径为2.8~6.1nm的范围内,产物选择性随Au纳米粒子的粒径的减小而增大,平均粒径在2.8~4.8nm的范围内时,催化剂具有较好的产物选择性(大于90%);Au/ZnO催化剂循环利用4次后催化性能(转化率和选择性)无明显下降;并推测了无碱条件下Au/ZnO选择性催化氧化1,3-丙二醇合成3-羟基丙酸甲酯的反应机制.     

可见光驱动Ag3PO4催化降解罗丹明B和甲基橙

采用简易离子交换法制备可见光驱动Ag3PO4光催化剂.通过X射线衍射、场发射扫描电子显微镜、N2吸附-脱附、紫外-可见漫反射光谱及傅里叶变换红外光谱对所制备的Ag3PO4催化剂进行表征.结果表明,在可见光照射下,Ag3PO4催化剂对罗丹明B降解表现出优越的光催化活性,但对甲基橙的降解活性低,这归因于Ag3PO4催化剂对甲基橙分子吸附量低.可见光照Ag3PO4反应体系中,空穴和超氧自由基共同发挥作用导致罗丹明B和甲基橙光催化降解.在罗丹明B的协助作用下,Ag3PO4催化剂对甲基橙的可见光催化降解活性大大增强,这是由于罗丹明B的存在可产生更多的超氧自由基,从而使甲基橙进一步降解.     

Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.