Influence of Host's Substitution on the Orientation of the Guest: Pseudo-rotaxanes of Charged Cyclodextrins with Methyl Orange in Solution

Methyl Orange (MO), an azo-dye molecule with an inherent dipole moment, has been used as a probe to explore the influence of anionic or cationic substituents of cyclodextrins (CDs) on the mode of insertion to form pseudorotaxanes, using NMR spectroscopy. MO is oriented in a single mode inside the βCD cavity, with the dimethylamino group localized at the secondary side. This orientation is completely reversed when MO enters the anionic sodium heptakis[6-deoxy-6-(3-thiopropionate)]-βCD (βpsp) cavity, whereas inside the cationic heptakis(6-deoxy-6-amino)-βCD hydrochloride, MO flips once more, to adopt the same orientation as in βCD. In the latter case the water solubility of MO is significantly lowered. The disposition of the guest in βCD and in each βCD derivative in a single mode was attributed principally to anti-parallel dipole-dipole stabilization. In the wider γCD, the availability of more cavity space leads to 1:2 and 2:2 host/guest stoichiometries and the effect of dipoles is of secondary significance. In the anionic sodium octakis[6-deoxy-6-(3-thiopropionate)]-γCD, MO is positioned as in βpsp, but a 1:2 adduct is also detected. Finally, MO does not dissolve in octakis(6-deoxy-6-amino)-γCD hydrochloride solution.     

Preconcentration and determination of methyl methacrylate by dispersive liquid–liquid microextraction

This article describes the preconcentration of methyl methacrylate in produced water by the dispersive liquid–liquid microextraction using extraction solvents lighter than water followed by gas chromatography. In the present experiments, 0.4 mL dispersive solvent (ethanol) containing 15.0 μL extraction solvent (toluene) was rapidly injected into the samples and followed by centrifuging and direct injection into the gas chromatograph equipped with flame ionization detector. The parameters affecting the extraction efficiency were evaluated and optimized including toluene (as extraction solvent), ethanol (as dispersive solvent), 15 μL and 0.4 mL (as the volume of extraction and dispersive solvents, respectively), pH 7, 20% ionic strength, and extraction's temperature and time of 20°C and 10 min, respectively. Under the optimum conditions, the figures of merits were determined to be LOD = 10 μg/L, dynamic range = 20–180 μg/L, RSD = 11% (n = 6). The maximum recovery under the optimized condition was determined to be 79.4%.     

Regioselective Monoacetylation of Methyl Pyranosides of Pentoses and 6‐Deoxyhexoses by Acetic Anhydride in the Presence of MoCl5

Convenient regioselective syntheses of 3‐acetates of methyl pyranosides of α‐L‐rhamnose, α‐ and β‐L‐arabinose, α‐D‐fucose, α‐D‐lyxose, and β‐D‐ribose with good yields have been attained using MoCl₅ as catalyst. Methyl β‐L‐rhamnopyranoside under this conditions gave 2‐acetate.     

Synthesis of Methyl N‐Aryl Oxamate Using Soluble Polymer Support

A variety of methyl N‐aryl oxamates were synthesized using poly(ethylene glycol) (PEG) as a soluble polymer support and a monoproctection group with excellent yields.     

MULTIPLE EMULSIONS STABILIZED BY COLLOIDAL MICROGRYSTALLINE CELLULOSE

Multiple emulsions stabilized by colloidal microcrystalline cellulose (CMCC, Avicel RC591) at the w/o and o/w interfaces, and by the addition of Span 80 or Span 85 at the w/o interface, were studied by means of brightfield microscopy, freeze-etch electron microscopy, droplet size distribution analysis and rheologic measurements. Stable multiple emulsions were prepared by incorporation of sodium chloride in the innermost aqueous phase, thereby creating an osmotic gradient preventing loss of the inner aqueous phase to the external aqueous phase. Freeze-etch electron microscopy of the multiple emulsions indicated the presence of a network of microcrystalline cellulose at the outer o/w interface. It may be assumed that the surfactant directly stabilized the w/o interface by adsorption at the interface, as well as indirectly by facilitating wetting of the microcrystalline cellulose by the oil. From rheologic measurements, the existence of a three-dimensional network in the external aqueous phase was indicated by the considerable degrees of thlxotropy and significant static yield values of these multiple emulsions.     

钒钼协同作用下杂多酸催化阻聚甲基丙烯酸甲酯

利用一锅法制备了Dawson型钨磷酸和钼钒磷酸,并用红外光谱和X-射线衍射表征了其结构.采用沸腾法研究了合成的杂多酸对甲基丙烯酸甲酯(MMA)的催化阻聚性能,考察了杂多酸结构、杂多酸用量和反应温度等因素对MMA本体聚合反应的影响.结果表明:钒钼元素在杂多酸催化阻聚MMA的反应中具有明显的协同作用,而且,杂多酸对MMA的催化阻聚作用随钒原子数的增加而增强,杂多酸的用量和反应温度对MMA自聚反应的速率影响较大.在过氧化苯甲酰(BPO)为0.04 g,MMA为10 mL,H9P2Mo15V3O62质量为MMA的0.06%,反应温度为101.2℃或H9P2Mo15V3O62质量为MMA的0.03%,反应温度为89.4℃时,MMA自聚反应被抑制.与传统和常用酚阻聚剂相比,Dawson型钼钒磷酸具有阻聚效果好、后处理简单、无腐蚀和污染问题等优点,能够作为MMA的阻聚剂使用.     

A catalyst-free protocol for direct oxidative esterification of alcohols and aldehydes

A fast, simple, and efficient protocol for the direct conversion of alcohols and aldehydes to methyl ester has been developed using TsNBr₂ without any catalyst. The one pot reaction proceeds in the presence of a base at room temperature in methanol, to produce the corresponding methyl ester in high yield within a short time.     

Reactions of enaminones and related compounds with N,N-dimethylacetamide dimethyl acetal. A simple one-pot metal-free synthesis of polysubstituted benzene derivatives

Herein a simple one-pot metal-free synthesis of alkyl-, aryl-, heteroaryl- and alkoxycarbonyl substituted 1,3-bis(dimethylamino)benzene derivatives is described. The products were prepared from the corresponding methyl ketones or compounds with an α-methylene group in regard to the carbonyl group, using N,N-dimethylacetamide dimethyl acetal (DMADMA) as the reagent.     

Stereoselective synthesis of erythro-β-chloroamines and their conversion into functionalized trans-oxazolidin-2-ones

New erythro-β-chloroamines were synthesized by a mild and efficient stereoselective chlorination of unprotected amino alcohol diesters. These products are shown to be excellent building blocks for the synthesis of new substituted trans-oxazolidin-2-ones.     

Ionic‐liquid‐mediated poly(dimethylsiloxane)‐ grafted carbon nanotube fiber prepared by the sol–gel technique for the head space solid‐phase microextraction of methyl tert‐butyl ether using GC

A headspace solid‐phase microextraction method was developed for the preconcentration and extraction of methyl tert‐butyl ether. An ionic‐liquid‐mediated multiwalled carbon nanotube–poly(dimethylsiloxane) hybrid coating, which was prepared by covalent functionalization of multiwalled carbon nanotubes with hydroxyl‐terminated poly(dimethylsiloxane) using the sol–gel technique, was used as solid‐phase microextraction adsorbent. This innovative fiber exhibited a highly porous surface structure, high thermal stability (at least 320°C) and long lifespan (over 210 uses). Potential factors affecting the extraction efficiency were optimized. Under the optimum conditions, the method LOD (S/N = 3) was 0.007 ng/mL and the LOQ (S/N = 10) was 0.03 ng/mL. The calibration curve was linear in the range of 0.03–200 ng/mL. The RSDs for one fiber (repeatability, n = 5) at three different concentrations (0.05, 1, and 150 ng/mL) were 5.1, 4.2, and 4.6% and for the fibers obtained from different batches (reproducibility, n = 3) were 6.5, 5.9, and 6.3%, respectively. The developed method was successfully applied to the determination of methyl tert‐butyl ether in different real water samples on three consecutive days. The relative recoveries for the spiked samples with 0.05, 1, and 150 ng/mL were between 94–104%.