Ionic‐liquid‐mediated poly(dimethylsiloxane)‐ grafted carbon nanotube fiber prepared by the sol–gel technique for the head space solid‐phase microextraction of methyl tert‐butyl ether using GC

A headspace solid‐phase microextraction method was developed for the preconcentration and extraction of methyl tert‐butyl ether. An ionic‐liquid‐mediated multiwalled carbon nanotube–poly(dimethylsiloxane) hybrid coating, which was prepared by covalent functionalization of multiwalled carbon nanotubes with hydroxyl‐terminated poly(dimethylsiloxane) using the sol–gel technique, was used as solid‐phase microextraction adsorbent. This innovative fiber exhibited a highly porous surface structure, high thermal stability (at least 320°C) and long lifespan (over 210 uses). Potential factors affecting the extraction efficiency were optimized. Under the optimum conditions, the method LOD (S/N = 3) was 0.007 ng/mL and the LOQ (S/N = 10) was 0.03 ng/mL. The calibration curve was linear in the range of 0.03–200 ng/mL. The RSDs for one fiber (repeatability, n = 5) at three different concentrations (0.05, 1, and 150 ng/mL) were 5.1, 4.2, and 4.6% and for the fibers obtained from different batches (reproducibility, n = 3) were 6.5, 5.9, and 6.3%, respectively. The developed method was successfully applied to the determination of methyl tert‐butyl ether in different real water samples on three consecutive days. The relative recoveries for the spiked samples with 0.05, 1, and 150 ng/mL were between 94–104%.     

INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAPFREE P（MMA-EA-MAA） PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.     

Preconcentration and determination of methyl methacrylate by dispersive liquid–liquid microextraction

This article describes the preconcentration of methyl methacrylate in produced water by the dispersive liquid–liquid microextraction using extraction solvents lighter than water followed by gas chromatography. In the present experiments, 0.4 mL dispersive solvent (ethanol) containing 15.0 μL extraction solvent (toluene) was rapidly injected into the samples and followed by centrifuging and direct injection into the gas chromatograph equipped with flame ionization detector. The parameters affecting the extraction efficiency were evaluated and optimized including toluene (as extraction solvent), ethanol (as dispersive solvent), 15 μL and 0.4 mL (as the volume of extraction and dispersive solvents, respectively), pH 7, 20% ionic strength, and extraction's temperature and time of 20°C and 10 min, respectively. Under the optimum conditions, the figures of merits were determined to be LOD = 10 μg/L, dynamic range = 20–180 μg/L, RSD = 11% (n = 6). The maximum recovery under the optimized condition was determined to be 79.4%.     

新引发体系引发MMA活性自由基聚合

近年来 ,关于活性自由基聚合的研究极为活跃 ,已经发现了多种基于增长链自由基被可逆钝化形成休眠种的活性自由基聚合方法[1,2 ] .它们主要包括引发转移终止剂 ( Iniferter) ,稳定自由基聚合( SFRP) ,原子转移自由基聚合 ( ATRP) ,可逆加成 -断链链转移聚合 ( RAFT)等 .其中 ATRP因其具有可聚合单体多 ,反应条件相对缓和等优点而成为该领域的研究热点 [3～ 5] .ATRP活性自由基聚合的实现主要是在过渡金属催化剂的作用下 ,通过循环往复的碳 -卤键的活化、加成、碳 -卤键的再形成而得到最终活性的聚合物 ,引发体系由引发剂、过渡金属…     

A theoretical study of CH4 dissociation on Pt(1 0 0) surface

Density functional theory calculations have been performed on the adsorption of H and CH₃, and the dissociation of CH₄ on Pt(1 0 0) surface. It was found that H was adsorbed on the top and bridge sites, while CH₃ was adsorbed only on the top site. The coadsorption of methyl and hydrogen which has also been investigated shows that the interaction between the two adsorbates is stabilising. In addition, two distinct pathways were explored, differing by the initial adsorbed state of CH₄. They converge readily to the same transition state corresponding to an activation energy value of 0.53 eV. These results compare favourably with existing data in the literature for Pt(1 1 1) and Pt(1 1 0).     

Adsorption of methyl orange on nanoparticles of a synthetic zeolite NaA/CuO

CuO supported on an NaA zeolite (CuO/NaA) was prepared with an NaA zeolite through the ion-exchange (CuO/NaA) method. The morphology and the physicochemical properties of the prepared samples were investigated by XRD, MEB, and EDS. The various parameters, such as contact time, catalyst dose, initial dye concentration, initial pH, and temperature, influencing the adsorption of methyl orange (MO) were optimized. The MO adsorption equilibrium was reached after 240 min of contact time. Removal of MO is better at neutral pH than in acidic and alkaline solutions. Among the tested models, the equilibrium adsorption data are well fitted by the Langmuir isotherm. The adsorption kinetics is best described by the pseudo-second-order model. The evaluation of the thermodynamic parameters, i.e. ΔG^o, ΔH^o, and ΔS^o, revealed that MO adsorption was spontaneous, while the activation energy (20.98 kJ/mol) indicates a physical adsorption. The photodegradation of MO decreased from 100 mg/L down to 2 mg/L when the solution is exposed to visible light.     

Phase equilibria for binary systems of octane boosters with 2,2,4-trimethylpentane

Isobaric vapor–liquid equilibrium data at 95.96 kPa for the three binary systems of 2,2,4-trimethylpentane with methyl tert-butyl ether, di-isopropyl ether and dimethoxymethane are determined. A Swietoslawski type ebulliometer is used for the measurements. The experimental T–x data are used to estimate Wilson parameters and the parameters, in turn, are used to calculate vapor phase compositions and activity coefficients. All the systems studied here do not exhibit azeotropes and behave like non-ideal solutions.     

Intelligence Way from Eco-friendly Synthesis Strategy of New Heterocyclic Pyrazolic Carboxylic α-Amino Esters

The α-amino acid derivatives constitute a class of compounds of particular medicinal and synthetic attention and considerable interest has been devoted to their synthesis in recent years. In the present work, we develop the computational study of the synthesis reaction of new pyrazolyl α-amino esters derivatives using the Gaussian 09 based on the DFT/B3LYP density functional theory method, with the base 6-31G(d, p) to ensure the possibility of carrying out these reactions within the laboratory of synthesis. Indeed, this research has encouraged us to establish an economical synthesis strategy of these products in overall yields of 73.5% to 87% to have access to new active biomolecule through the O-alkylation reaction between methyl α-azidoglycinate N-benzoylated and primary pyrazole alcohols[(3,5-dimethyl-1H-pyrazol-1-yl)methanol, (1H-pyrazol-1-yl)methanol and (3-ethoxy-5-methyl-1H-pyrazol-1-yl)methanol] under different operating conditions. The structure of the prepared heterocyclic systems was characterized by conventional spectroscopic techniques, like ¹H NMR, ¹³C NMR, and MS. The results revealed that the experimental study is in good correlation with the computational one.     

乙烯系单体自由基聚合的阻聚效应——Ⅸ.受阻胺-醌类电荷转移络合物对甲基丙烯酸甲酯自由基聚合的阻聚及历程

用膨胀计法研究了西氯苯醌(CA)、苯醌(BQ)与受阻胺二异丙胺(DIPA)、2,2,6,6-四甲基-4-羟基哌啶(TMP)形成的电荷转移络合物(CTC)对偶氮二异丁腈(AIBN)引发的甲基丙烯酸甲酯(MMA)自由基聚合阻聚效应。结果表明,CA-DIPA、CA-TMP、BQ-DIPA和BQ-TMP对MMA的自由基聚合均产生较单独的醌或胺更显著的阻聚能力。其中以CA-DIPA阻聚效果更佳。比较了MMA在苯或乙腈中的溶液聚合,得类似结果。初步讨论了受阻胺-醌电荷转移络合物对MMA自由基聚合的阻聚反应机理。     

甲基橙褪色动力学光度法测定槲皮素的研究

基于稀H2SO4介质中,槲皮素对KBrO3氧化甲基橙褪色反应的明显催化作用,建立了测定痕量槲皮素的动力学光度法。在选定的条件下,方法的线性范围为0~0.05 mg/L,表观摩尔吸光系数为4.52×106L.mol-1.cm-1,检出限为0.0012 mg/L。利用此法测定了银杏叶和中药制剂慢严舒柠中的槲皮素,加标回收率为95%~106.7%,相对标准偏差小于3.3%。