Implementation and investigation of iterative solvers in the Discrete Sources Method

The implementation of iterative methods as solvers for the Discrete Sources Method (DSM) is presented. In this method, light scattering computation linear systems with dense and relative small matrices are generated. The linear systems are traditionally solved using the QR-decomposition method. For large particles or particles with extreme geometries even this commonly stable solver can fail. In these cases, we expect that iterative methods can provide a satisfying solution nevertheless.We will present our investigation in two consecutive papers. Here, we study four different iterative solvers (RGMRES, BiCGStab, BiCGStab(l), and MinRes) considering the performance and the accuracy for typical light scattering problems. Using these iterative methods we increased the quality of a solution, especially for oblate spheroids with a higher aspect ratio. Preconditioning technique is considered in the following paper.     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

凑合反推法──流体力学变分原理建立的一条新途径

凑合反推法是刘商联系统方法[1]的进一步发展，应用这种方法可以方便地构造各种亚广义变分原理及广义变分原理，并可以消除临界变分现象．对于任何二维守恒型流体力学方程，作者推导得到了其广义变分通用公式．几个实例证明这种方法是有效的、简单的，并具有普遍的意义．     

地源热泵的运行特性模拟研究

依据圆柱源理论,建立起了耦合地面热泵机组和地下埋管换热器特性的模拟模型,该模型可用于长期运行的地源热泵系统的短时间步长运行特性模拟。探讨了模拟过程中有关参数的确定方法,并运用所建模型对地源热泵的冬季和夏季运行特性进行了模拟。运行特性模拟与实验数据的验证结果表明,所建模型可以对地源热泵的运行特性做出符合实际的预测。     

基于离散平稳小波变换的红外图像去噪

提出了一种基于离散平稳小波变换的红外图像去噪方法。在预先不知道噪声方差的前提下,只利用红外图像的输入数据就可以确定所要求的渐近最优阈值。对红外图像进行离散平稳小波变换后,分别对各个分解层的高频子带利用所提出的方法进行迭代去噪,使各个高频子带分别收敛于其最大信噪比。实验结果表明,所提出的方法在有效的去除红外图像噪声的同时,又能较好的保持红外图像的细节部分信息。算法在性能指标和视觉质量上均优于基于离散正交小波变换的阈值去噪方法和传统的中值滤波法。     

Gd3+对Ca0.8Zn0.2TiO3:Pr3+红色发光材料的敏化作用

采用溶胶-凝胶法在较低温度下合成了红色发光材料Ca0.8Zn0.2TiO3:0.002Pr3 ,xGd3 .金属离子预先溶解含有柠檬酸的乙二醇溶液中.XRD表明在800℃灼烧2h形成了钛酸盐的晶体.荧光检测结果表明所合成样品的特征激发峰为330nm、特征发射峰为614nm,分别对应于O(2p)→Ti(3d)带间跃迁和Pr3 的1D2→3H4的特征发射.样品的发光强度随x的不同而不同,发光强度增强了29%-69%.当x＝0.0005时,即nPr3 :nGd3 ＝4∶1时样品的红色发光强度最强,发光强度增强了69%.     

Full-Wave Analyses for a Multi-Layered Microstrip Patch Antenna

This paper describes numerical modelling of a dual band multi-layered microstrip patch antenna operating at 35GHz on an in-house semi-insulating GaAs substrate. The simulated and measured resonant frequencies at both lower and upper resonant frequencies will be compared to check the accuracy of the different numerical modelling techniques.     

XRF法在四川盆地须家河组沉积相研究中的应用

X射线荧光光谱仪在地质样品测定上的应用还不是很广泛,而将X射线荧光光谱法应用到沉积相的研究中则更少。将X射线荧光光谱法(XRF)应用到川中地区上三叠统须家河组二段沉积环境及古气候的识别中,针对四川盆地上三叠统须家河组二段沉积相及沉积环境有争议的问题,特别是须二段地层属于陆相沉积还是海相沉积的问题,采集了四川盆地内四个有代表性地区的须家河组样品,采用X 射线荧光光谱法分析须家河组各段沉积物的元素含量及变化特征,并根据不同相带及沉积环境的元素含量标志,定量分析须家河组沉积相带与沉积环境。研究结果表明： 须家河组二段的Sr/Ba值、Mn/Fe 值和Sr/Ca值均落在陆相沉积的范围内,且与须家河组三-四段的元素含量特征无明显差异,Sr/Cu元素比分析结果表明须家河组沉积时期为温暖—湿润的古气候环境,结果证明四川盆地上三叠统须家河组二段属于温湿气候下的陆相沉积,且与须家河组三-四段沉积环境相类似。X射线荧光光谱法与常规化学分析法实验结果相对误差小于3%,该方法简单易行,为沉积相及沉积环境的识别提供了一种简单、可行且能够定量分析的研究方法。为解决有争议地层沉积相的问题提供了一种较可行的新方法,推动了X射线荧光光谱分析法在地质上的应用。     

EAST�������������η������ĵ��Ż�

介绍了计算伏秒消耗的玻印亭方法,并通过扫描等离子体电流爬升率对伏秒消耗进行了优化分析。分析结果对EAST装置长脉冲稳态放电提供一定的参考。     

Hybrid Electrodes Used in Polymer Electro-Optic Modulator with Ultra-Broadband

Hybrid electrode combined coplanar waveguide (CPW) and microstrip lines in ultra-broadband electro-optic modulators. The characteristics of the modulators with hybrid electrode is like that of the modulator with the microstrip lines, in which the microstrip electrode is loaded above only one arm of Mach-Zehnder (M-Z) optical waveguide, besides the problem of microstrip line to coaxial transition and corona polarization in polymer modulators have been best solved at the same time. By using finite element method (FEM), the characteristic parameters such as half-wave voltage, modulation bandwidth characteristic impedance, effective microwave refractive index of polymer modulators with microstrip line and hybrid electrode are analysed and compared in this paper. The results present that velocity match, impendence match and lower microwave propagating loss is easily realized in modulators with hybrid electrode.