自由流中涡扰动的边界层感受性的数值研究

用直接数值模拟的方法研究平板二维边界层对自由流中涡扰动的感受性．在自由流涡扰动与壁面凸起物的相互作用下，在边界层内找到了激发出来的Tollmein-Schlichting(T-S)波，证实了感受性现象及其中波长转变机制的存在．数值模拟得到的T-S波幅值与自由流扰动幅值、凸起高度及矩形凸起物长度的关系，与实验测量所得一致．则由此确定的感受性线性关系式的适用范围亦与实验所得相符．     

An Efficient Parallel Reverse Conversion of Residue Code to Mixed-Radix Representation Based on the Chinese Remainder Theorem

In this paper, we deal with the critical problems in residue arithmetic. The reverse conversion from a Residue Number System (RNS) to positional notation is a main non-modular operation, and it constitutes a basis of other non-modular procedures used to implement various computational algorithms. We present a novel approach to the parallel reverse conversion from the residue code into a weighted number representation in the Mixed-Radix System (MRS). In our proposed method, the calculation of mixed-radix digits reduces to a parallel summation of the small word-length residues in the independent modular channels corresponding to the primary RNS moduli. The computational complexity of the developed method concerning both required modular addition operations and one-input lookup tables is estimated as , where k equals the number of used moduli. The time complexity is modular clock cycles. In pipeline mode, the throughput rate of the proposed algorithm is one reverse conversion in one modular clock cycle.     

Asymmetric nonlinear-mode-conversion in an optical waveguide withPT symmetry

Asymmetric mode transformation in waveguide is of great significance for on-chip integrated devices with one-way effect, while it is challenging to achieve asymmetric nonlinear-mode-conversion (NMC) due to the limitations imposed by phase-matching. In this work, we theoretically proposed a new scheme for realizing asymmetric NMC by combining frequency-doubling process and periodic PT symmetric modulation in an optical waveguide. By engineering the one-way momentum from PT symmetric modulation, we have demonstrated the unidirectional conversion from pump to second harmonic with desired guided modes. Our findings offer new opportunities for manipulating nonlinear optical fields with PT symmetry, which could further boost more exploration on on-chip nonlinear devices assisted by non-Hermitian optics.     

High-energy picosecond single-pass multi-stage optical parametric generator and amplifier

We demonstrate a new management of multi-stage optical parametric generator(OPG)and amplifier(OPA)to obtain high-energy picosecond sources with high beam quality.The setup of multi-stage OPG-OPA requires mode-matching between the pump beam and the stable mode of the OPG-OPA.In a proof-of-principle experiment,the single-pass multi-stage OPG-OPA consists of three walk-off compensated KTP crystal pairs and two lenses,pumped by an 86 ps,1064 nm 10 kHz picosecond laser.The signal light at~1.77μm has an average output power of 502 mW with record energy up to 50.2μJ.The beam quality factor of the signal light can be improved toM²_x ×M²_yafter filtering out about 40%signal power.To the best of our knowledge,it is the first picosecond single-pass multi-stage OPG-OPA pumped at kHz regime.     

LED毫伏级待测电动势实验仪的设计及其稳定性的研究

为了满足电位差计实验对毫伏级待测电动势需求,设计了LED毫伏级待测电动势实验仪,并对其稳定性进行了研究.待测电动势实验仪是通过光电转换来实现的,输出的毫伏级电动势在电位差计实验仪的各个测量点都能稳定,能够满足箱式电位差计测量范围和精度要求,是比较理想的箱式电位差计实验配套仪器,能够大大提高学生的实验效率和教师对实验设计的选择性,实验效果良好.     

阳极界面修饰对钙钛矿太阳能电池性能的影响

采用在聚(3,4-乙撑二氧噻吩)∶聚苯乙烯磺酸(Poly(3,4-ethylenedioxythiophene)∶Poly(styrenesulfonate),PEDOT∶PSS)阳极界面层上直接旋涂二甲基亚砜(Dimethyl Sulfoxide,DMSO)的方法,对PEDOT∶PSS薄膜进行修饰,以提高所制得的钙钛矿太阳能电池器件性能.在5000rpm转速条件下旋涂DMSO后,器件的能量转换效率达到11.43%,与PEDOT∶PSS阳极界面层未做任何修饰的器件相比,效率提高了29.15%.测试表征了修饰前后PEDOT∶PSS薄膜的透光性、表面形貌、电导率、器件的外量子效率曲线以及器件在光照和暗态下的J-V特性曲线,分析了器件性能提高的原因.结果表明:经过修饰的PEDOT∶PSS薄膜导电性显著增强,从而更加有利于器件阳极对空穴的抽取和收集;较未修饰时,器件的短路电流密度得到了大幅度提升,进而使得器件获得更高的能量转换效率.     

一种新型径向三腔同轴虚阴极振荡器全三维粒子模拟研究

提出了一种新型径向三腔同轴虚阴极振荡器,并进行了数值模拟研究. 研究表明: 这种径向三腔结构在束波转换面进行电场调制,能够大幅提高束波转换效率;同时,由阳极栅网和径向三腔结构构成的谐振装置能有效地抑制模式竞争;另外,由于采用了同轴引出结构,在提高能量引出的同时还能有效吸收漂移管中被利用过的电子,因此这种新型虚阴极振荡器能够获得较高的输出功率. 模拟的电子束电压为400 kV,电流为50 kA,主频为4.5 GHz,峰值功率达到6 GW,平均输出功率为3.1 GW,束波转换效率达到15%. 关键词： 高功率微波 同轴虚阴极振荡器 粒子模拟 束波转换效率     

Cu等离子体X射线脉冲光源

介绍了１．０６μｍ激光加热Ｃｕ靶发射的１．２ｋｅＶ能区Ｘ射线转换效率和强度的测量方法和实验结果。结果表明，Ｃｕ等离子体是一种在１．２ｋｅＶ能区的ｘ射线强脉冲光源。     

对激光等离子体中X射线的产生与辐射加热研究

利用一维辐射流体力学程序MULTI数值模拟研究了功率为1014Wcm2、脉冲宽度为300ps、波长为0.44μm的强激光辐照平面Au靶时产生X射线的过程,给出了X射线转换效率和能谱分布.通过将靶物质划分为对所产生的X射线光学薄的转化区和光学厚的再发射区,得到了作为黑体辐射热源的最佳靶厚度,并给出了辐射加热靶所产生的等离子体的密度和温度的空间分布. 关键词： 辐射流体力学 激光等离子体 X射线转换 辐射热波     

Modeling of the Temporally and Spatially Modulated Fourier Transform Imaging Spectrometer working in orbit

Temporally and Spatially Modulated Fourier Transform Imaging Spectrometer (TSMFTIS) is a new kind of imaging spectrometer and is applicable in remote sensing. Compared with Temporally Modulated Imaging Interferometer and Spatially Modulated Imaging Interferometer, it employs immovable parts and abandons slit. Based on the analysis of its physical theory, optical principle, data gathering and processing, the mathematical model of the TSMFTIS working in orbit is proposed in this paper. The model is comprised of different function blocks, such as fore-optics, interferometer and so on. For simulation, a big remote sensing image is utilized as ground scene, and a conversion which is similar to color mode conversion from RGB to Lab is made to produce artificial spectra of various ground objects. At last, a validation experiment is performed with real-world spectra of four pieces of colorful cloths by using a commercially available spectrometer.