Solubilization of methane,ethane, propane andn-butane in aqueous solutions of sodium dodecylsulfate

The solubilities of methane, ethane, propane, and n-butane were measured in aqueous solutions of sodium dodecylsulfate (NaDS) (0–0.1M) from 15 to 27°C. From these measurements the standard Gibbs energies, entropies, and enthalpies for the process of transferring the solute molecules from the gaseous phase into the solutions were calculated. An approximate relationship was found relating the volume fraction of the micelles to NaDS concentration.     

Studies on the Performance and Structure of Supported Catalysts for the Partial Oxidation of Methane to Syngas

The catalytic properties of several supported metal catalysts on different carriers were studied in the partial oxidation of methane (POM) to syngas. In our experiment, supported noble metal catalysts exhibited better performance than the other supported transition metal catalysts. The catalyst performances were significantly influenced by the d-electron configuration of the active metal components and the dispersion of active metal components on the support. A catalyst with a moderate number of unpaired electrons in the d-orbital of the active metal support without obvious acidity or redox activity (e.g. MgO) was suitable for POM performance. The Rh/SiO2 catalyst was the best in the POM reaction, among those investigated. Reaction conditions apparently also affected the POM performance of the catalyst. The conversion of methane and the selectivity for CO increased with the reaction temperature, and a high CH4/O2 ratio was not beneficial for POM performance.     

压力对甲烷部分氧化制合成气反应的影响

甲烷部分氧化制合成气是近年来催化界关心的课题之一，文献报导的工作多在常压下进行［１～４］．然而天然气和纯氧都有一定压力，且以合成气为原料的后续过程通常都在较高压力下操作，从节能的角度出发，研究加压甲烷部分氧化制合成气具有重要的实际意义［１，２］．我们...     

van der Waals corrections to density functional theory calculations: Methane,ethane, ethylene,benzene, formaldehyde,ammonia, water,PBE, and CPMD

Parameters are developed for a practical application of the empirical van der Waals (vdW) correction infrastructure available in the CPMD density functional theory (DFT) code. The binding energy, geometry, and potential energy surface (PES) are examined for methane, ethane, ethylene, formaldehyde, ammonia, three benzene dimer geometries, and three benzene–water geometries. The vdW corrected results compare favorably with MP2 and CCSD(T) calculations near the complete basis set limits, and with experimental results where they are available.     

Approach for the Direct Synthesis of β-Dichlorosubstituted Acetanilides Using Iodine Trichloride (ICl3) as the Oxidant and Catalyst

A reliable method for direct synthesis of β‐dichlorosubstituted acetanilides is reported. The key transformation involves the oxidative and catalytic cleavage of a carbon‐carbon bond in the presence of iodine trichloride (ICl₃). In this protocol ICl₃ is used not only as the catalyst but also as the oxidant which widely broadens the scope of its application in organic synthetic chemistry.     

A handheld mid-infrared methane sensor using a dual-step differential method for additive/multiplicative noise suppression

A miniature mid-infrared (mid-IR) methane (CH₄) sensor system was developed by employing a wide-band wire-source and a semi-ellipsoid multi-pass gas cell. A dual-step differential method instead of the traditional one-step differential method was adopted by this sensor to tune measuring range/zero point and to suppress the additive/multiplicative noise. This method included a first subtraction operation between the two output signals (including a detection signal and a reference signal) from the dual-channel detector and a second subtraction operation on the amplitudes of the first-subtraction signal and the reference signal, followed by a ratio operation between the amplitude of the second-subtraction signal and the reference signal. Detailed experiments were performed to assess the performance of the sensor system. The detection range is 0–50 k ppm, and as the concentration gets larger than 12 k ppm, the relative detection error falls into the range of −3% to +3%. The Allan deviation is about 4.65 ppm with an averaging time of 1 s, and such value can be further improved to 0.45 ppm with an averaging time of 124 s. Due to the cost-effective incandescence wire-source, the small-size ellipsoid multi-pass gas cell and the miniature structure of the sensor, the developed standalone device shows potential applications of CH₄ detection under coal-mine environment.     

A facile route to germanium(IV) binaphthoxide complexes: crystal structure of a chiral resolved germanium(IV) binaphthoxide

A method for the facile synthesis of chiral germanium(IV) binaphthoxide complexes from the corresponding binaphthols and an organogermanium trichloride has been developed, which allows these unusual types of compounds to be synthesized in high yields. The crystal structure of one such complex, (S)-[Ge{O2C20H10(SiMe3)2-3,3'}{Cl}{Ph}], has been determined.     

α-SUBSTITUIERTE PHOSPHONATE 52.1 SYNTHESE UND REAKTIONEN VON 1- ACETOXY-1-METHYLTHIOMETHAN PHOSPHORYLVERBINDUNGEN

Abstract

The 1-acetoxy-1-methylthiomethanephosphoryl compounds (4) are prepared from methylthiomethanephosphoryl derivatives (1) by electrolysis in 0.6 molar sodium acetate/acetic acid solution. The reaction of 1-acetoxy compounds (4) with halogen carriers gives the 1-halogen-1-methylthiomethane-phosphoryl derivatives 5, 7 and 8. The reaction of 4a under PTC-conditions results in cleavage of the P-C-bond.

Die 1-Acetoxy-1-methylthiomethanphosphoryl-Verbindungen (4) wurden aus Methylthiomethanphos-phorylderivaten (1) durch Elektrolyse in 0.6 molarer Na-acetat/Essigsäure-Lösung dargestellt. Die Reaktion der 1-Acetoxyverbindungen mit Halogenüberträgern führt zu den 1-Halogen-1-methyl-thiomethanphosphorylderivaten 5, 7 und 8. Bei Reaktion von 4a unter PTC-Bedingungen beobachtet man eine Spaltung der P-C-Bindung.     

Bismuth Trichloride–Catalyzed C‐Alkylation of Pyrroles with Electron‐Deficient Olefins

The BiCl₃‐catalyzed reaction of pyrroles with electron‐deficient olefins generated the corresponding Michael adducts in high yields.     

Three-Component,Four-Molecule,Ru-Catalyzed Cascade Reactions of Indoles and Alkyl Bromides with Sodium Nitrite

Abstract

An operationally simple domino approach for the ruthenium-catalyzed synthesis of (E)-2,3′-bi(3H-indol)-3-one O-alkyl oximes by the region- and stereoselective three-component, four-molecule reactions of indoles with sodium nitrite and alkyl bromides under mild reaction condition in dimethylformamide is described. Remarkably, multiple bonds including C?C, C=N, and C?O bonds were conveniently formed in one pot. The reaction is tolerant to air and is atom economical, in accordance with the concept of modern green chemistry.