Ni／γ—Al2O3,Ni／MgO,Ni／SiO2催化剂上甲烷与二氧化碳重整反应的研究

采用ＸＲＤ，ＵＶ－ＤＲＳ，ＸＰＳ，ＴＰＲ，Ｈ２－Ｏ２滴定和吡啶吸附－红外光谱等技术，研究了负载于具有不同酸碱性的γ－Ａｌ２Ｏ３，ＳｉＯ２，Ｍｇｏ载体上的镍催化剂表面物理化学性质，及其对甲烷与二氧化碳重整制取合成气反应催化活性的影响。结果表明，在上述负载型镍催化剂上，影响重整反应活性和积炭量的主要原因不是催化剂表面酸碱性，而是金属镍在催化剂表面的分散度。     

Optimization of inoculum to substrate ratio for enhanced methane yield from leather fleshings in a batch study

One of the most significant issues of the last few decades has been tracing for renewable energy sources. Animal fleshing (ANFL) is the most common proteinaceous solid waste accured during the production of leather and it must be disposed of in an environmentally responsible manner. This paper is attempts to assess the biogas production from solid waste originating from the chrome based tannery. Anaerobic digestion of these wastes will be a viable option for waste stabilization and energy production in the form of biogas to be utilized in the industry. The bio-methane potential of the wastes were examined by mixing these wastes with various sources of inoculum and different inoculum to substrate (I/S) ratio considered. The batch experiments were carried out in 2.5 l glass reactors with a various source of inoculumviz., Cow Dung (CD), Elephant Dung (ED) and Bio-Digested Slurry (BDS) with varied inoculum to substrate (LFs) ratios for a retention time of 50 days with replications. The results obtained from the experiments showed that BDS:LF (25:75) had the highest gas production of 14505 ml (651.85 ml CH₄g^?1 VS) followed by CD:LF (50:50) produced 12072.5 ml (789.36 ml CH₄g^?1 VS) and ED:LF (75:25) produced 11252.5 ml (1492.08 ml CH₄g^?1 VS)with a methane content of 63.77, 61.92 and 62.72%, respectively.     

Computer modeling for analysis of complex reaction kinetics

A new method for computer prediction of the catalytic activity dependence on service life and technological conditions for bifunctional Pt catalysts has been proposed. The proposed method is based on physical and chemical laws of multicomponent hydrocarbon transformations on polymetallic catalysts and takes into account deactivation of acidic (Al) and metallic (Pt) sites. It allows to calculate the product composition and catalytic activity level for real industrial units as a function of their technological parameters and raw material characteristics.     

In situ sensing of the middle atmosphere with balloonborne near-infrared laser diodes

Since 1997, two near-infrared laser diode sensors have been developed with the support of the CNES, the French space agency, to provide in situ data of H(2)O, CH(4) and CO(2) in the middle atmosphere. The realized instruments were flown from stratospheric balloons within the framework of European campaigns for the study of stratospheric ozone and water vapor and were involved in the validation of the ODIN and ENVISAT satellites. In this paper, we describe the developed laser probing technique, we report atmospheric measurements and finally we discuss future perspectives, particularly the in situ laser sensing of the lower atmosphere of Mars and the implication of the laser hygrometers in balloon campaigns at mid-latitudes and tropical regions to investigate the sources and sinks of stratospheric H(2)O.     

27Al和29Si MAS-NMR对Mo/HZSM-5催化剂的研究

使用＾２９Ａｌ固体离分辨核磁技术对甲烷无氧芳构化催化剂Ｍｏ／ＨＺＳＭ－５分子筛进行了研究，发现ＨＺＳＭ－５分子筛本体中仅含有少量非骨架Ａｌ，Ｍｏ物种与分子筛骨架Ａｌ的相互作用随Ｍｏ担载量以及焙烧的温度的升高而增加，在高温焙烧下，Ｍｏ物种会使分子筛骨架严重脱铝，并且生成Ａｌ２（ＭｏＯ４）３新相，最终导致分子筛骨架塌陷，催化性能下降。     

Mo、W金属氧化物对CH4/CO2重整Ni基催化剂性能的影响

用XRD、XPS、元素分析、TEM和活性评价等方法研究过渡金属氧化物MoO3和WO3对SiO2负载的Ni基催化剂物理化学性质和CH4/CO2重整制合成气催化性能的影响.结果表明,在负载型的镍催化剂中,MoO3和WO3的添加一方面提高了Ni的核外电子密度,减弱了对CH4深度裂解积炭;另一方面使催化剂表面镍的相对浓度降低,结构上起到了隔离、分散金属颗粒的作用,氧的相对浓度升高,有效提高了催化剂的抗烧结和抗积炭能力,显示出较好的催化稳定性.     

对甲烷氧化偶联W－Mn／SiO＿2催化剂Na＿2WO＿4的流失及其影响的考察

用ＸＲＤ、ＦＴ－ＩＲ、ＥＳＲ、Ｈ２－ＴＰＲ和ＴＰＯ等方法，对Ｎａ２ＷＯ４－Ｍｎ２Ｏ３／ＳｉＯ２催化剂和其经水煮处理的一系列样品进行了表征．实验发现该催化剂中的结晶态Ｎａ２ＷＯ４易于流失，单层分布的Ｎａ２ＷＯ４在苛刻的处理条件下也有可能流失．依此，探讨了上述流失现象与Ｎａ２ＷＯ４－Ｍｎ２Ｏ３／ＳｉＯ２催化剂的催化活性及该催化剂在长时间反应中发生的ＳｉＯ２相变之间的关系，证明了结晶态Ｎａ２ＷＯ４的流失对该催化剂甲烷氧化偶联反应的催化活性只有轻微的影响，单层分布Ｎａ２ＷＯ４的流失可造成催化剂中Ｍｎ从Ｍｎ３＋转变为Ｍｎ２＋，并使催化剂的催化活性明显降低．但在水煮条件下，无论是结晶态的还是单层分布，Ｎａ２ＷＯ４的流失都没有对ＳｉＯ２的α－方石英结构产生影响     

Synthesis of Nickel Supported Catalysts for Hydrogen Production by Sol-Gel Method

SiO₂ and Al₂O₃ supported Ni catalysts were synthesized in the form of xerogels: the SiO₂ based materials were prepared starting from Ni propionate or glycolate salts and reacting them with tetraethoxysilane (TEOS) in propionic acid, Si(ethylene glycolate) or sodium silicate. The Al₂O₃ supported catalysts were prepared similarly from Ni propionate salts with Al iso-propoxide salts. Narrow metal particles and strong metal support interactions are observed in the sol-gel catalysts. The metal dispersion was higher for Al₂O₃ based materials than the SiO₂ ones and it deeply depends on the Ni precursor for the silica supported Ni. Wet impregnated oxides with similar Ni loading have higher metal surface area than those from sol-gel processing. The influence of surface differences on the catalytic activity of the materials was studied following the CH₄ and CO₂ reaction in dry reforming conditions by pulse reaction tests.     

负载型镍金属催化剂上甲烷与二氧化碳重整制合成气

报道了负载型Ｎｉ金属催化剂的表面特征和对ＣＨ４与ＣＯ２重整制合成气的催化性能，反应结果和ＴＰＲ，ＸＲＣ结果表明：Ｎｉ担载量为９．０％的催化剂具有最佳的反应性能，Ｎｉ组分以高散表面化合物形式存在，助剂对催化剂活性的影响随载体和添加方式的不同较大差异，其中少量ＭｇＯ，Ｌａ２Ｏ３对改善催化剂的稳定性和抗积碳能力有十分显著的效果，载体和制备方法对催化剂性能具有明显影响，其中浸渍法制备的Ｎｉ／ＭｇＯ催化剂不     

Strategies to enhance the enzymatic hydrolysis of pretreated softwood with high residual lignin content

Pretreatment of Douglas-fir by steam explosion produces a substrate containing approx 43% lignin. Two strategies were investigated for reducing the effect of this residual lignin on enzymatic hydrolysis of cellulose: mild alkali extraction and protein addition. Extraction with cold 1% NaOH reduced the lignin content by only approx 7%, but cellulose to glucose conversion was enhanced by about 30%. Before alkali extraction, addition of exogenous protein resulted in a significant improvement in cellulose hydrolysis, but this protein effect was substantially diminished after alkali treatment. Lignin appears to reduce cellulose hydrolysis by two distinct mechanisms: by forming a physical barrier that prevents enzyme access and by non-productively binding cellulolytic enzymes. Cold alkali appears to selectively remove a fraction of lignin from steam-exploded Douglas-fir with high affinity for protein. Corresponding data for mixed softwood pretreated by organosolv extraction indicates that the relative importance of the two mechanisms by which residual lignin affects hydrolysis is different according to the pre- and post-treatment method used.