COMBINED PARTIAL OXIDATION AND CARBONDIOXIDE REFORMING OF METHANE PROCESS TO SYNTHESIS GAS

IntroductionIthasbccndcmonstratcdthatmcthancrcformingt"ithcarbondioxidcpr0ducessynthcsisgasrichincarbonmonoxidc-x"hichisuscfulforthcs}nthcsisofaccticacid'dimcthylcthcrando.o-alcoholsll'2].Carbondioxidcref0rmingismorccndothcrmicthanstcamrcformingfCH4 CO2,'2CO 2H2Ai/'2,,=2473kJ..ol-1(l)Accordingl\"thisrcact1onnccdshighcrtcmpcraturcandlimitsspaccvclocityoffccdgas,Wehavcprct'ious1\studicdmcthancrcformingt"lthC02inthcmonotubcproccssl3J.Inordertoconvcrtmcthancinfccdgascomplctcl}',thcspaccvcloci…     

甲烷在Mo/HZSM-5催化剂上的脱氢聚合反应

对不同Mo含量的Mo／HZSM－5催化剂的结构进行了表征，并对这些催化剂的甲烷非氧气氛下的转化反应进行了考察．催化剂的BET比表面积及酸性随Mo含量的增加而降低，当Mo含量大于5％时，Mo对ZSM－5分子筛的晶型有影响，并出现MoO3物相．甲烷在700℃时可高选择性地生成苯和乙烯，最佳Mo含量大约为2％．纯的MoO3或HZSM－5上该反应几乎不进行，因此，可能是分散的钼氧离子和分子筛的酸中心是甲烷转化的活性中心，只有二者的协同作用才能促进甲烷的转化．反应后催化剂中的钼物种被还原了．催化剂上的积炭可能是催化剂失活的主要原因之一，烧炭后催化剂活性基本恢复．     

Parametric study of catalytic reforming process?

Summary A parametric study of catalytic reforming process in a pilot plant was carried out by varying the pressure, H₂/HC ratio, and space velocity. The results show that lower aromatics and higher hydrogen yields can be accomplished by increasing the space velocity in existing reformers, which will also result in better C₅⁺yield.     

ZrO2在Cu-ZnO-ZrO2甲醇水蒸汽重整制氢催化剂中的作用

通过对一系列Cu-ZnO-ZrO2甲醇水蒸汽重整(SRM)催化剂的XRD、TEM和BET表征及催化性能测定,研究催化剂中ZrO2对催化剂粒径、比表面以及对SRM反应性能的影响.结果表明,ZrO2的加入,使催化剂的粒径从15 nm降至10 nm（其中CuO和ZnO的平均粒径分别从7.7和10.4 nm降至3.9和8.7 nm）,BET比表面从60 m2•g－1增至78 m2•g－1.随着催化剂含ZrO2量不同,甲醇的转化率和H2、CO2的选择性均产生变化,当催化剂中Zr含量为24.0％(w),反应温度为220 ℃,水、醇摩尔比为1.3时,甲醇的转化率达到51.6％, H2和CO2的选择性达到100％(CO和CH4在产物气体中的体积分数小于10－4),这一结果对甲醇燃料电池甲醇重整器的应用具有重要的意义.     

Properties and Characterization of Modified HZSM—5 Zeolites

Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673K were investigated.The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desortion (TPD) of ammonia.The structure of the samples was characterized by XRD,and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy(SEM).The XRD results show that the modified samples have no novel crystalline phase,indicating a high dispersion of phosphorus and boron species.After treatment,the microporous volume and surface area of the samples markedly decrease,implying the bolockage of the channel.The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type Ⅰ and Ⅳ，and all hysteresis loops resemble the H4-type in the IUPAC classification.The total acidity of the modified samples,determined by pyrldine adsorption IR and TPD of ammonia,decreases in contrast to that of the parent HZSM-5.The conversion of n-heptane over P and B steammodified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.     

甲烷氧化细菌催化二氧化碳生物合成甲醇的研究

甲烷氧化细菌中包含的甲烷单加氧酶(MMO)、甲醇脱氢酶(ADH)、甲醛脱氢酶(FaldDH)、甲酸脱氢酶(FateDH)经过一系列反应能够把甲烷深度氧化生成二氧化碳，并生成一定的能量物质．把二氧化碳还原为甲醇是一个需要能量的过程，目前还没有已知的有机体在温和条件下完成这一反应．研究发现，甲基弯菌Methylosi-nus trichosporium IMV 3011可以催化二氧化碳生物转化生成甲醇．在休眠的悬浮细胞中充人二氧化碳后，反应一段时间在反应液中检测到了甲醇．二氧化碳转化成甲醇是一个需要能量推动的反应，为了补充反应所消耗的能量．反应一段时间后需要用甲烷进行再生，以恢复细胞中的还原当量NADH．我们进行了反应再生的交替连续批式反应，甲醇积累量能够维持在一个比较稳定的水平．理论上，反应不会增加温室效应，这是一个有效的、环境友好的、可恢复的反应过程．     

液化石油气水蒸气重整镍催化剂新型载体研究

以共沉淀法合成了硅铝系载体（AS和SA），并采用改性天然高铝石为原料合成了矿物质载体（MC-1和MC-2）,采用浸渍法合成了镍负载型催化剂。用常压固定床管式反应器，考察了液化石油气水蒸气重整反应活性，通过XRD、物理吸附等手段对催化剂进行了表征。结果表明，以MC-1、MC-2和SA、AS为载体的催化剂的水蒸气重整活性明显高于目前普遍使用的Ni/α-Al2O3催化剂。以SA为载体，负载5%镍的催化剂具有最好的水蒸气重整活性。在750 ℃，水碳比为2.0的条件下转化率达100％，C1选择性达94.46％。XRD分析结果表明1 300 ℃焙烧后的SA载体中存在α-Al2O3晶型和莫来石结构。硅、铝添加次序对水蒸气重整活性影响较大，硅-铝添加次序的催化剂样品的活性高于铝-硅添加次序的样品，C1选择性提高12.7％。     

便携式微波等离子体离子化检测器气相色谱仪用于气体分析的研究

本文使用自制的便携式微波诱导等离子体离子化检测器气相色谱仪对可燃气体中N_2、O_2、H_2和CH_4的测定方法进行了研究。以氩气为载气和工作气体,考察了改进后的微波诱导等离子体离子化检洲器(MIPID)的工作参数对测定的影响。对煤气和乙炔中的O_2、N_2、H_2和CH_4进行了测定,分析结果与热导池检测器(TCD)的气相色谱法一致。讨论了高电离电位(>11.7ev)气体组分在MIPID中响应特性。     

Flammability studies of 3-methyl pyridine/water system

In industrial processes, information on the safety property of chemicals is essentially crucial for safe handling during unit operations. Ensuring the safe use of combustible or flammable substances in processes is unlikely without detailed investigations of their flammability characteristics and related hazards. We studied 3-methyl pyridine (3-picoline), e.g., flammability limits (LFL/UFL), maximum explosion pressure (P _max), maximum explosion pressure rise (dP/dt)_max, minimum oxygen concentration (MOC), vapor deflagration index (K _g), and characterized the influence of inert steam (H₂O) on critical parameters for 3-picoline/water mixtures at 270°C, 1 atm, various oxygen concentrations, and vapor mixing ratios (100/0, 30/70, 10/90 and 5/95 vol.%) with a 20-L-Apparatus in simulated conditions, respectively. The results showed that the flammability characteristics of 3-picoline_(aq) all increased with the oxygen concentration. However, as the composition of inert steam increased, the flammability parameters and the degree of fire and explosion hazards were significantly reduced, instead. This study elucidated the flammability properties of 3-picoline mixed with inert steam. The conclusions could be applied to proactively prevent the relevant processes from incurring fire and explosion accidents.     

甲烷氧化偶联Ti-La-Li系混合氧化物催化剂

研究了Ti-La-Li三元氧化物的组成、结构及其对甲烷氧化偶联反应的催化性能；用XRD、IR、XPS和SEM等方法对催化剂进行表征，结果表明：在LiTi_xLa_(1-x)O_2系列催化剂中，随x值的不同，可生成LaTi_(1－y)Li_yO_(3-λ)、Li_2TiO_3、La_(0.66)TiO_(2.993)、La_2O_3和Li_(1.33)Ti_(1.66)O_4几种物相，其中，钙钛矿到三元复合氧化物LaTi_(1-y)Li_yO_(3-λ)是甲烷氧化偶联反应的主要活性相，活性位Li~＋-O~－-Ti~(3＋)的形成是活性提高的主要原因．Li_2TiO_3和La_(0.66)TiO_(2.993)是深度氧化活性相，而Li_(1.33)Ti_(1.66)O_4既无偶联活性，也无深度氧化活性．