Removal of Carbamazepine in Aqueous Solution by CoS2/Fe2+/PMS Process

Carbamazepine (CBZ), as a typical pharmaceutical and personal care product (PPCP), cannot be efficiently removed by the conventional drinking water and wastewater treatment process. In this work, the CoS₂/Fe²⁺/PMS process was applied for efficient elimination of CBZ. The CBZ removal efficiency of CoS₂/Fe²⁺/PMS was 2.5 times and 23 times higher than that of CoS₂/PMS and Fe²⁺/PMS, respectively. The intensity of DMPO-HO• and DMPO-SO4•− followed the order of Fe²⁺/PMS < CoS₂/PMS < CoS₂/Fe²⁺/PMS, also suggesting the CoS₂/Fe²⁺/PMS process has the highest oxidation activity. The effects of reaction conditions (e.g., CoS₂ dosage, Fe²⁺ concentration, PMS concentration, initial CBZ concentration, pH, temperature) and water quality parameters (e.g., SO42−, NO3−, H2PO4−, Cl−, NH4+, humic acid) on the degradation of CBZ were also studied. Response surface methodology analysis was carried out to obtain the best conditions for the removal of CBZ, which are: Fe²⁺ = 70 µmol/L, PMS = 240 µmol/L, CoS₂ = 0.59 g/L. The sustainability test demonstrated that the repeated use of CoS₂ for 8 successive cycles resulted in little function decrease (<10%). These findings suggest that CoS₂/Fe²⁺/PMS may be a promising method for advanced treatment of tailwater from sewage treatment plant.     

Polyoxometalate/Cellulose Nanofibrils Aerogels for Highly Efficient Oxidative Desulfurization

Polyoxometalate (POM) presents great potential in oxidative desulfurization (ODS) reaction. However, the high dissolubility of POM in common solvents makes it difficult to recycle. Besides, the small specific surface area of POM also limits the interaction between them and the substrate. Depositing polyoxometalates onto three-dimensional (3D) network structured materials could largely expand the application of POM. Here, the surfaces of cellulose nanofibrils (CNFs) were modified with very few (3-Aminopropyl) trimethoxysilane (APTS) to endow positive charges on the surfaces of CNFs, and then phosphotungstic acid (PTA) was loaded to obtain the aerogel A-CNF/PTA as the ODS catalyst. FT-IR indicated the successful deposition of PTA onto aminosilane modified CNF surfaces. UV-VIS further suggested the stability of PTA in the aerogels. BET and SEM results suggested the increased specific surface area and the relatively uniform 3D network structure of the prepared aerogels. TGA analysis indicated that the thermal stability of the aerogel A-CNF/PTA50% was a little higher than that of the pure CNF aerogel. Most importantly, the aerogel A-CNF/PTA50% showed good catalytic performance for ODS. Catalysis results showed that the substrate conversion rate of the aerogel A-CNF/PTA50% reached 100% within 120 min at room temperature. Even after five cycles, the substrate conversion rate of the aerogel A-CNF/PTA50% still reached 91.2% during the dynamic catalytic process. This work provides a scalable and facile way to stably deposit POM onto 3D structured materials.     

Structural characteristics and residual stresses in oxide films produced on Ti by pulsed unipolar plasma electrolytic oxidation

Oxide films, 7–10 µm thick, were produced on commercially pure titanium by plasma electrolytic oxidation in a sodium orthophosphate electrolyte using a pulsed unipolar current with frequency (f) and duty cycle (δ) varying within f = 0.1–10 kHz and δ = 0.8–0.2, respectively. The coatings comprised a mixture of an amorphous phase with nanocrystalline anatase and rutile phases, where the relative rutile content range was 17–25 wt%. Incorporation of phosphorus from the electrolyte into the coating in the form of PO₂ ^–, PO₃ ^2– and PO₄ ^3–, as demonstrated by EDX and FT-IR analyses, contributed to the formation of the amorphous phase. Residual stresses associated with the crystalline coating phase constituents were evaluated using the X-ray diffraction sin² ψ method. It was found that, depending on the treatment parameters, internal direct and shear stresses in anatase ranged from–205 (±17) to–431 (±27) MPa and from–98 (±6) to–145 (±10) MPa, respectively, whereas the rutile structure is comparatively stress-free.     

Studies on the Photochemical Oxidation of 1,3-Diphenylisobenzofuran and Cis-Cyclooctene in N,N-Dimethylformamide–Propanol Binary Mixture

Kinetic studies on the photochemical oxidation of 1,3-diphenylisobenzofuran have been carried out in binary liquid mixtures of N,N-dimethylformamide (DMF) with 1-propanol (PrOH). The strongest influence of solvating effects upon the course of this reaction was observed for compositions of the studied mixture corresponding respectively to ca. 50?mol% of PrOH. Additionally, we have carried out analogous studies of photooxidation of cis-cyclooctene. Similarly as previously, the noticeable influence of solvating effects upon the course of this reaction corresponded to ca. 50?mol% of DMF. We suspect that the mechanism of this effect is associated with the formation of the polar intermediate during the ene reaction being easier.     

An environmentally benign benzylic oxidation catalyzed by hypervalent iodine intermediate in water

An effective and environmentally benign benzylic oxidation for transition of alkylarenes into the corresponding carbonyl compounds was reported.Alkylarenes were mixed and stirred with potassium bromide,m-chloroperbenzoic acid and a catalytic amount of iodobenzene in water at 60 8C for several hours,a series of the corresponding carbonyl compounds was obtained in moderate to good yields.In the reaction,iodobenzene was first oxidized by m-chloroperbenzoic acid into the hypervalent iodine intermediate which then reacted with potassium bromide to form the key radical initiator for the benzylic oxidation.     

Solid deformation induced by the adsorption of methane and methanol under sub- and supercritical conditions

Carbonaceous materials with some degree of flexibility in their physical structure can expand or contract under the influence of the forces exerted by adsorbed molecules. To gain insight into how adsorption of non-polar and polar fluids could deform a carbon solid, we present GCMC simulations of sub- and supercritical adsorption of methane and methanol in slit-shaped pores whose walls are made of graphene layers. Our extensive simulation study shows that there is a strong correlation between solvation pressure and solid deformation, and that the expansion or contraction of the pore strongly depends on adsorbate loading, temperature and pore size.     

Pt-Pd /y-A120.催化剂氧化性能的研究‘

本文采用浸演法制备了一系列Pt-Pd/Y-AlzO,催化剂，并考察其对正己烷，正丁醉和苯的催化氧化性能.结果表明，Pt-Pd双组分催化剂对极性有机物正丁醉有很高的氧化活性，而对于非极性有机物苯和正己烷的氧化活性相对较差.对Y-AlzOa载体进行高温预处理后，催化剂对苯和正己烷的氧化活性有明显提高.     

Hydrogen abstraction from H‐donor substrates by the 6‐CF3‐benzotriazol‐N‐oxyl radical (TFNO)

The aminoxyl radical 6‐trifluoromethyl‐benzotriazol‐N‐oxyl (TFNO) has been generated from the parent hydroxylamine 6‐CF₃‐1‐hydroxy‐benzotriazole (TFBT) by one‐electron oxidation with a Ce^IV salt and characterized by spectrophotometry and cyclic voltammetry (CV). Rate constants of H‐abstraction (k_H) by TFNO from a number of H‐donor benzylic substrates have been determined spectrophotometrically in MeCN solution at 25 °C. A radical H‐atom transfer (HAT) route of oxidation is substantiated for TFNO by several pieces of evidence. The kinetic data also testify the relevance of stereoelectronic effects upon the HAT reactivity of TFNO. Copyright © 2010 John Wiley & Sons, Ltd.     

Experimental study of the relationships between the spectral emissivity of brass and the temperature in the oxidizing environment

Effect of surface oxidization on the spectral emissivity of brass is studied over the temperature range from 800 to 1070 K at the wavelength of 1.5 μm. The temperature of brass surface is measured by averaging the two R-type platinum–rhodium thermocouples. The radiant energy emitted by the brass surface is received by an InGaAs photodiode detector. Two kinds of relationships between the spectral emissivity and the temperature are investigated in the oxidizing environment at the elevated temperature. One is the variation of spectral emissivity with the heating-duration time at the given temperature. The other is the variation of spectral emissivity with the temperature at the given heating-duration time. The interference effect of radiation coming from the brass surface and coming from the oxidization film is discussed when the oxidation film on the surface is grown. The resonant structures of spectral emissivity are observed during the whole heating period, in particular at the early stage of heating duration. The analytic formula of spectral emissivity versus the temperature is derived at the heating-duration time of 30, 60, 90, 120, 150, 180, 210, 240, 270 and 300 min, respectively. The conclusion is obtained that coefficients of analytic expressions between the spectral emissivity and the temperature are different from each other for the experimental results obtained at the different heating-duration time, though the polynomial functional form is suitable to fit all the measurements obtained in the present work.