Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

Graft copolymer of polymethyl methacrylate-g-polycarbonate urethane and the fully gelled grafted networks

We have synthesized and characterized the graft copolymer of polymethyl methacrylate (PMMA)-graft-polycarbonate urethane (PCU) (designated PMMA-g-PCU) and the fully gelled mutually crosslinked network composed of both PMMA and PCU (designated as PMMA-PCU-N). Unlike the previously synthesized one phase PCU/PMMA simultaneous interpenetrating polymer networks (IPN's), both of these new materials exhibited two distinct T_g's (from DSC and DMA studies) at all compositions which we have studied. The two-phase nature of the graft and network polymer was confirmed by TEM with domain sizes smaller than those found in the blends of the linear PCU and PMMA chains. In comparison with the corresponding IPN's, the PMMA-g-PCU and the PMMA-PCU-N were thermally less stable and had a lower ultimate strength. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of ran-copoly (p-phenylene sulfide sulfone/ketone)s

Random copoly(p-phenylene sulfide sulfone/ketone)s (PPSS/K) are prepared in high yield by the polycondensation of sodium hydrosulfide (NaSH) with bis(4-chlorophenyl) sulfone (BCPS) and 4,4′-dichlorobenzophenone (DCBP). The polymerization is conducted between 200–220°C, depending on the composition of the copolymer, and in the presence of water without any detrimental effects to the molecular weight. The copolymers with sulfone/ketone mole ratios (S : K) > 25 : 75 are amorphous, while the copolymers with S : K ratios ≤ 25 : 75 are crystalline. These materials form tough, creaseable films and exhibit a linear increase in the glass transition temperature with increasing sulfone content. Sulfuric acid solutions of the copolymers are dark orange to red and display an increasing λ_max in the uv-visible spectra as the S:K ratio of the copolymers decreases. © 1994 John Wiley & Sons, Inc.     

疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。     

聚醚氨酯的红外酰胺Ⅰ.谱带分析

通过对聚醚氨酯红外光谱酰胺-Ⅰ谱带的二级微商及傅里埃自解卷积处理,发现了位于1715cm~(-1)的新组分并可归属于无序的相间界面。应用差减光谱及曲线拟合对热处理试样的光谱谱带进行分析表明聚醚氨酯的加热/冷却过程是与可逆的无序/有序化过程及微相混合/分离过程有关的。新发现的1715cm(-1)组分强度的变化与无序/有序化过程是一致的。     

Controlled phase separations in solutions of soluble polyelectrolyte complex of DIVEMA (copolymer of divinyl ether and maleic anhydride)

Copolymer of divinyl ether and maleic anhydride (DIVEMA) is known to possess some anti-tumor and immune-stimulating activity and use as a drug carrier in anti-tumor drug delivery systems. Samples of DIVEMA of different degrees of polymerization were synthesized and characterized. Interaction of the hydrolyzed water-soluble DIVEMA polyanions with poly(N-ethyl-4-vinylpyridinium) cations (PEVP) has been studied. According to the potentiometry data, almost all carboxylic groups of the polyanions were able to form ion pairs with PEVP. In aqueous and water-salt solutions, formation of either soluble or insoluble polyelectrolyte complexes occurred depending on pH, ratio of the oppositely charged groups, and degree of polymerization of PEVP and/or DIVEMA. The phase separations followed general rules revealed by studying mixtures of PEVP and polycarboxylic acids. However in the case of DIVEMA, a significant broadening of the region for insoluble complexes at the expense of the region of soluble complexes was established. The data obtained demonstrate plausible advantages of the complex formation as the non-covalent modification of the polymeric carrier that endow DIVEMA with the ability for reversible soluble-insoluble transformation, in particular at physiological pH and ionic strength.     

荧光探针法研究PEO-PPO嵌段共聚物胶束的特性

利用十六烷基罗丹明Ｂ作为主要荧光探针，研究了水溶性嵌段共聚物Ｐｌｕｒｏｎｉｃ Ｆ－６８在水溶液中的胶束化行为，研究表明，Ｐｌｕｒｏｎｉｃ－Ｆ－６８形成胶束的监界胶束浓度与温度有极大关系，随温度的升高，其ＣＭＣ值急剧下降，并且温度对胶束的性质也有很大，影响温度升高可导致胶束的微观粘度增大，表现出很强的负粘－温效应，并发现引起这种负粘－温效应的主要原因是Ｐｌｕｒｏｎｉｃ Ｆ－６８分子中聚环氧乙烷（ＰＥ     

SBS与甲基丙烯酸丁酯本体接枝反应的研究

本文研究了以过氧化苯甲酰(BPO)为引发剂,甲基丙烯酸丁酯(BMA)既作溶剂又作为单体与苯乙烯-丁二烯嵌段共聚物(SBS)进行接枝共聚反应。用红外光谱、核磁共振谱及透射电镜表征了接枝共聚物(SBS-g-BMA)的组成及结构,讨论了时间、温度及SBS和BPO的用量对接枝的影响。     

Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

The effect of the sorbital nucleating agent on properties of the ethylene-octene copolymer (POE) toughened polypropylene (PP) was studied. The results show that the addition of POE increases notched Izod and Charpy impact strength significantly but impair the tensile strength and flexural modulus. As a nucleating agent (1,3,2,4-di(p-methylbenzylidene) sorbitol, DM) was added, the toughness and stiffness of toughed PP increased simultaneously at the same content of POE. This result shows that the toughness and stiffness of toughed PP are in balance. Polarized light microscopy analysis shows that with the addition of POE and nucleating agent, only a low level of PP spherulites were observed.     

苯乙烯-异戊二烯两嵌段共聚物溶液的dn/dc和紫外吸收光谱

本文研究了苯乙烯-异戊二烯两嵌段共聚物在CHCl_3中的折光指数浓度增量(dn/dc)和紫外吸收光谱。嵌段共聚物dn/dc具有很好的加和性,可以测定嵌段共聚物的组成。紫外吸收光谱的结果表明,除低苯乙烯含量的样品外,其它嵌段共聚物都显示明显的紫外增色性(UV hyperchromism)。因此UV和UV-RI双检测GPC不会得到可靠的嵌段共聚物组成数据。这种增色现象与其特征的紫外吸收谱图紧密关联