Oxygen nonstoichiometry and electrical conductivity of the solid solutions La2−xSrxNiOy (0≤x≤0.5)

Oxygen nonstoichiometry and electrical resistance of a series La_2−xSr_xNiO_y solid solutions, where x=0.0, 0.2 and 0.5 in argon flows at oxygen partial pressures 1.5, 10.2, 49.2, 100 and 286 Pa within the temperature range of 20–1050°C were studied. Nickelate oxygen desorption/sorption spectra when heating–cooling at constant rate demonstrated strong dependence of cation composition of the samples. Unlike La_1.5Sr_0.5NiO_y compounds those of La₂NiO_y and La_1.8Sr_0.2NiO_y have weakly bonded oxygen, capable to exchange reversibly with the gas phase at the temperatures higher than 250°C. The equilibrium values of oxygen nonstoichiometry and specific resistance for the these nickelates were determined at 300–1050°C and p_O2=1.5–286 Pa as a functions of temperature versus oxygen partial pressure. All nickelate studied appear to be p-type conductors with metal electric conductivity at equilibrium states.     

Mössbauer spectroscopy of green shale from banded iron formation

A green shale from the Precambrian banded iron formation of the Bonai Range, Eastern India, is examined by transmission Mössbauer spectroscopy. The constituent phases are identified to be chlorite, siderite and magnetite. The fractional resonance area of each constituent is computed and the ferrous-ferric ratio determined. The variation of this ratio over the sample is examined. Intensity of the magnetite lines reveals that deviation from stoichiometry is negligible. The observations suggest a transition within short range from silicate-rich facies to carbonate-oxide-rich facies in the studied section.     

PyTS/MV2+复合物光物理性质的研究

由于静电相互作用,PyTS溶液与MV2+溶液混合后能形成PyTS/MV2+基态复合物,由吸收光谱滴定得到其组成成分为11的二聚物;而由荧光光谱滴定得到PyTS/MV2+复合物组成成分不仅有11的二聚物,而且还有12的三聚物;由瞬态吸收光谱可观察到MV+、PyTS+的瞬态吸收峰,这表明PyTS/MV2+复合物被光激发后,发生了由PyTS到MV2+的电子转移过程;通过对吸收衰减分析得到PyTS/MV2+被光激发后的动力学过程.     

Blending Technology Based on HPLC Fingerprint and Nonlinear Programming to Control the Quality of Ginkgo Leaves

The breadth and depth of traditional Chinese medicine (TCM) applications have been expanding in recent years, yet the problem of quality control has arisen in the application process. It is essential to design an algorithm to provide blending ratios that ensure a high overall product similarity to the target with controlled deviations in individual ingredient content. We developed a new blending algorithm and scheme by comparing different samples of ginkgo leaves. High-consistency samples were used to establish the blending target, and qualified samples were used for blending. Principal component analysis (PCA) was used as the sample screening method. A nonlinear programming algorithm was applied to calculate the blending ratio under different blending constraints. In one set of calculation experiments, the result was blended by the same samples under different conditions. Its relative deviation coefficients (RDCs) were controlled within ±10%. In another set of calculations, the RDCs of more component blending by different samples were controlled within ±20%. Finally, the near-critical calculation ratio was used for the actual experiments. The experimental results met the initial setting requirements. The results show that our algorithm can flexibly control the content of TCMs. The quality control of the production process of TCMs was achieved by improving the content stability of raw materials using blending. The algorithm provides a groundbreaking idea for quality control of TCMs.     

Convenient One‐Pot Preparation of Dimethyl Bicyclo[2.2.2]octane‐1,4‐dicarbolylate,a Key Intermediate for a Novel Adenosine A1 Receptor Antagonist

Dimethyl bicyclo[2.2.2]octane‐1,4‐dicarboxylate (4), a key starting material for a novel adenosine A₁ receptor antagonist, was prepared in a one‐pot reaction with convenient workup and improved yield.     

Halide-guided oligo(aryl-triazole-amide)s foldamers: receptors for multiple halide ions

We synthesized and characterized a series of oligo(phenyl-amide-triazole)s that can fold into a helical conformation guided by halide ions. Their binding models and affinities are highly dependent on the length of the foldamer, media and the inducing capability of halide ions. The short foldamer with one helical turn shows a 1:1 binding stoichiometry to all halides, while the longer foldamer with two or three helical turns in principle can form 1:2 complexes with chloride anions even bromide anions with an enhancement on binding affinities. A result of quantitative NOE calculations imply that the longer foldamer should increase its helical pitch so as to release the electrostatic repulsion between halide ions.     

Differential size‐exclusion chromatography for the analysis of gelatin–polyelectrolyte complexes

Differential size‐exclusion chromatography (SEC) is used to characterize complexes formed between gelatin and two synthetic polyelectrolytes, sodium poly(styrenesulfonate) and sodium poly(2‐acrylamido‐2‐methylpropanesulfonate). The analysis is performed under aqueous, low‐salt conditions where maximum complexation between gelatin and the polyelectrolytes occurs. The adsorption effects that are commonly encountered in conventional SEC for gelatin and other charged polymers chromatographed under these solution conditions are minimized, because the columns are constantly equilibrated with the analytes in the mobile phase. Analyte solutions of identical composition, but of higher or lower concentration than that contained in the mobile phase, are injected, resulting in positive or negative detector responses, respectively. This method can separate the complexes from individual components, and can be used to determine relative sizes and stoichiometries of the complexes as a function of both the input ratio of gelatin to polyelectrolyte and the molecular weight of the polyelectrolyte. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 275–280, 1999     

Protein Unfolding: 1H‐NMR Studies of Paramagnetic Ferricytochrome c‐550 from Horse Heart

Electronic transfer protein cytochrome c‐550 from horse heart is studied in the unfolded state by means of paramagnetic ¹H NMR. The protein contains 104 aminoacid residues and a heme group with low spin Fe^III ion in the oxidized form of protein. The global secondary structure is of the α‐helix type as occurs in the case of very other cytochromes c investigated such as cyt c‐550 from Thiobacillus versutus or cyt c‐551 from Pseudomonas aeruginosa. We have studied the coordination characteristic and electronic properties of heme iron horse heart ferricytochrome c‐550 at increasing denaturing conditions (up to 3.1 M GuHCl and 288‐323 K). The ¹H T₁ values of the signals were measured and some resonance assignments made based on EXSY experiments. The electronic structure of the iron(III) is discussed on the basis of the temperature dependence of the isotropic shifts and relaxation times. These results show that it is produced a change of spin, from low‐spin iron(III) (²T₂, S=1/2) in the folded state to high‐spin iron(III) (⁶A₁, S=5/2) in the unfolded state. It seems to be possible that in the opened structure the ferricyt c‐550 loses one axial ligand (His/‐) appearing the spin transition.     

CE-ICP-MS for studying interactions between metals and biomolecules

Metal-biomolecule interactions comprise an important research area in metallomics, and are significant for biology, medicine, pharmacy, nutrition, metabolism, and environmental science. Hybrid techniques are preferred for studying interactions between metals and biomolecules. Of all the separation techniques, capillary electrophoresis (CE) exhibits high resolution, minimal sample and reagent consumption, and rapid and efficient separations with minor disturbance of the existing equilibrium between the metal species and their biomolecular complexes. Inductively coupled plasma mass spectrometry (ICP-MS) presents high sensitivity to most of elements and offers multi-element detection.This article provides an overview of CE-ICP-MS for the study of metal-biomolecule interactions. We discuss applications of CE-ICP-MS to the study of interactions between metals or metalloids and natural ligands, such as humic substances or fulvic acids, and the interchange of metal complexes with metal species in metalloproteins.     

Determination of Association Constants of Cyclodextrin-Nonionic Surfactant Inclusion Complexes by a Partition Coefficient Method

The partition behavior of isotopic labeled nonionic surfactants between carbon tetrachloride and an aqueous solution containing -cyclodextrin (-CD) was studied with a liquid scintillation counting technique. The association constants of the inclusion complexes were determined at different temperatures. It was found that the nonionic surfactants form 1 : 1 inclusion complexes with -CD. The results demonstrated that the smaller the HLB values of the nonionic surfactants, the greater the association constants with -CD, and that for the same surfactant the association constant is higher at lower temperatures.