Direct targeting of human plasma for matrix-assisted laser desorption/ionization and analysis of plasma proteins by time of flight-mass spectrometry

A method to analyze human plasma proteins without fractionation, directly applying a plasma-matrix mixture on the target plate of a matrix-assisted laser desorption/ionization-time of flight-mass spectrometer (MALDI-TOF-MS), has been described. Peaks of ionized plasma proteins could not be detected applying a mixture of an undiluted plasma sample and a matrix solution, but they appeared when the plasma was diluted before mixing with the matrix. Tenfold diluted plasma provided well-resolved protein peaks in the m/z range from 4000 to 30,000. The addition of a simple post-crystallization washing procedure performed on the target plate further improved the quality of mass spectra. We numbered 58 peaks in the range of 4-160 kDa and 32 out of which were assigned to the plasma protein species which have been reported. Especially high sensitivity and resolution were obtained in the region < 30 kDa, where multiple isoforms of apolipoprotein A-I, apolipoprotein A-II, apolipoprotein C-I, apolipoprotein C-II, apolipoprotein C-III, and transthyretin could be assigned. Various post-translational modifications are involved in the isoforms, e.g., proteolytic cleavage, glycosylation and chemical modifications. This method will become complementary with the present electrophoretic techniques, especially for the analysis of low-molecular-mass proteins.     

A differential microcalorimetric study of whey proteins and their behaviour in oil-in-water emulsions

Oil-in-water emulsions (20% soya oil, 1% protein) have been prepared containing lysozyme or isolates of -lactalbumin and β-lactoglobulin from whey protein. The structural characteristics of these proteins adsorbed at an oil/water interface were determined by following their thermal transitions using differential scanning microcalorimetry. Thermograms of the proteins in the adsorbed state differed markedly from the corresponding transitions seen for the proteins in solution. This suggests that the proteins underwent substantial changes in secondary and tertiary structure upon adsorption. In general, for all the proteins studied, a net decrease in the total energy absorbed during denaturation was found when the proteins were in an adsorbed state. Both lysozyme and -lactalbumin were in part “surface denatured”, and they showed a certain degree of reversibility between solution and the adsorbed state. β-Lactoglobulin showed the highest degree of denaturation upon adsorption and the conformational change was irreversible.     

Probing the water coordination of protein-targeted MRI contrast agents by pulsed ENDOR spectroscopy.

A novel methodology based on electron-nuclear double resonance (ENDOR) spectroscopy is used for the direct determination of the water coordination number (q) of gadolinium-based magnetic resonance imaging (MRI) contrast agents. Proton ENDOR spectra can be obtained at approximately physiological concentrations for metal complexes in frozen aqueous solutions either in the presence or absence of protein targets. It is shown that, depending on the structure of the co-ligand, the water hydration number of a complex in aqueous solution can be significantly different to when the complex is noncovalently bound to a protein. From the ENDOR spectra of the exchangeable protons, precise information on the metal-proton distance can be derived as well. These essential parameters directly correlate with the efficacy of MRI contrast agents and should therefore aid the development of novel, highly efficient compounds targeted to various proteins.     

Surface modification of proteins by covalent binding of acrylic polymers

Surface modification of enzymes for a potential use in therapy was obtained with a new type of tailor-made copolymers ofNacryloylmorpholine andN-acryloxysuccinimide. The first monomer was designed to confer solubility on the polymer, whereas the second was used to give it reactivity toward protein amino groups. The reactivity of polymers of different composition towards amino acid derivatives and model proteins, such as catalase and ribonuclease-A, is described. Water soluble and catalytically active enzyme derivatives were obained using copolymers prepared with a mixture of N-acryloxysuccinimide andn-acryloylmorpholine in a 1:99 molar ratio. At increasing molar ratio (3:97, 10:90) extensive crosslinking between polymer and enzymes takes place, yielding insoluble adducts.     

Highly conformationally constrained halogenated 6-spiroepoxypenicillins as probes for the bioactive side-chain conformation of benzylpenicillin

Summary The halogenated 6-spiroepoxypenicillins are a series of novel semisynthetic-lactam compounds with highly conformationally restricted side chains incorporating an epoxide. Their biological activity profiles depend crucially on the configuration at position C-3 of that epoxide. In derivatives with aromatic-containing side chains, e.g., anilide, the 3R-compounds possess notable Gram-positive antibacterial activity and potent-lactamase inhibitory properties. The comparable 3S-compounds are antibacterially inactive, but retain-lactamase inhibitory activity.Using the molecular simulation programs COSMIC and ASTRAL, we attempted to map a putative, lipophilic accessory binding site on the PBPs that must interact with the side-chain aromatic residue. Comparative computer-assisted modelling of the 3R, and 3S-anilides, along with benzylpenicillin, indicated that the available conformational space at room temperature for the side chains of the 3R and the 3S-anilides was mutually exclusive. The conformational space for the more flexible benzylpenicillin could accommodate the side chains ofboth the constrained penicillin derivatives. By a combination of van der Waals surface calculations and a pharmacophoric distance approach, closely coincident conformers of the 3R-anilide and benzylpenicillin were identified. These conformers must be related to the antibacterial, bioactive conformer for the classical-lactam antibiotics. From these proposed bioactive conformations, a model for the binding of benzylpenicillin to the PBPs relating the three-dimensional arrangement of a putative lipophilic S₂-subsite, specific for the side-chain aromatic moiety, and the 3-carboxylate functionality is presented.This work has been reported in preliminary form at the 4th Royal Society of Chemistry International Symposium on Recent Advances in the Chemistry of-lactam Antibiotics, Churchill College, Cambridge, U.K., 3–6 July 1988.     

Whey proteins eluted reversed phase gradients

The behavior of bovine whey proteins in Reversed-Phase High Performance Liquid Chromatography (RP-HPLC) systems has been investigated. The Linear Solvent Strength (LSS) model has been applied to the separation of these proteins studying how their retention time and band broadening change when different gradient parameters are modified. From our results it is deduced that the LSS model describes the behaviour of the whey proteins in RP-HPLC. Also, it seems that t_s (the retention time for non-retained solutes) depends on the size of these proteins. The good fit observed between experimental data and the equations deduced from the LSS model allows the prediction of a gradient shape that permits a rapid analysis of the above mentioned proteins.     

Hydrophilic core-shell microspheres: a suitable support for controlled attachment of proteins and biomedical diagnostics

Functional hydrophilic microspheres (latex particles) have found various applications in life sciences and in medicine - particularly in latex diagnostic tests. This paper presents a comprehensive review of studies on latex particles with a hydrophilic interfacial layer composed of various hydrophilic polymers with reactive groups at the ends of macromolecules or at each monomeric unit along the chain. Typical examples of these hydrophilic polymers are poly(2-hydroxyethyl methyl methacrylate), poly(acrylic acid), poly(N,N-dimethylacrylamide), polysaccharides, poly(ethylene oxide) and polyglycidol. Hydrophilic microspheres with different morphologies (uniform or core-shell, see Figure) have been synthesized by emulsion and dispersion polymerizations. The chemical structure of polymers which constitute the interfacial layer of microspheres has been investigated using a variety of instrumental techniques (such as XPS, SSIMS and NMR) and analytical methods based on specific chemical reactions suitable for the determination of particular functional groups. Microspheres are exposed to contact with proteins in the majority of medical applications. This paper presents examples of studies on the attachment of these biomacromolecules to microspheres. The relation between the structure of the interfacial layer of microspheres and the ability of these particles for the covalent binding of proteins is discussed. Several examples of diagnostic tests, in which hydrophilic microspheres with adsorbed or covalently immobilized proteins were used as reagents, are presented. The paper also contains a short review of the application of magnetic hydrophilic particles for protein separation. Examples of hydrophilic latex particles used for hemoperfusion or heavy metal ion separation are presented. Hydrophilic microspheres with uniform or core-shell morphologies.     

Principle of a new immunoassay based on electrophoretic mobility of poly(styrene/alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol) microspheres: application for the determination of helicobacter pylori IgG in blood serum

The principle of a novel latex diagnostic test for the determination of antibodies against Helicobacter pylori in blood sera is described. The test is based on the measurement of the electrophoretic mobility of the microspheres with immobilized H. pylori antigens. The electrophoretic mobility of these microspheres depends on the concentration of the antibodies against H. pylori in suspending medium. Particles with hydrophilic polyglycidol in the surface layer were used for the test. The microspheres were obtained by an emulsifier-free emulsion copolymerization of styrene and alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol macromonomer (D(n) = 220 nm, diameter polydispersity factor D(w)//D(n) = 1.02). Activation of polyglycidol hydroxyl groups with cyanuric chloride allowed for covalent immobilization of H. pylori antigens. The fraction of H. pylori not specifically adsorbed onto the microspheres was negligible. Changes of the electrophoretic mobility of the microspheres with the surface concentration of the covalently immobilized H. pylori antigens Gamma = (1.6 +/- 0.3) . 10(-3) g m(-2) were suitable for the detection of the antibodies in the sera of patients with titer in the range (determined by the indirect ELISA test) from 1:500 to 1:32 000.     

Self-assembled monolayers of dendritic polyglycerol derivatives on gold that resist the adsorption of proteins

Highly protein-resistant, self-assembled monolayers (SAMs) of dendritic polyglycerols (PGs) on gold can easily be obtained by simple chemical modification of these readily available polymers with a surface-active disulfide linker group. Several disulfide-functionalized PGs were synthesized by N,N'-dicyclohexylcarbodiimide-mediated ester coupling of thioctic acid. Monolayers of the disulfide-functionalized PG derivatives spontaneously form on a semitransparent gold surface and effectively prevent the adsorption of proteins, as demonstrated by surface plasmon resonance (SPR) kinetic measurements. A structure-activity relationship relating the polymer architecture to its ability to effectuate protein resistance has been derived from results of different surface characterization techniques (SPR, attenuated total reflectance infrared (ATR-IR), and contact-angle measurements). Dendritic PGs combine the characteristic structural features of several highly protein-resistant surfaces: a highly flexible aliphatic polyether, hydrophilic surface groups, and a highly branched architecture. PG monolayers are as protein resistant as poly(ethylene glycol) (PEG) SAMs and are significantly better than dextran-coated surfaces, which are currently used as the background for SPR spectroscopy. Due to the higher thermal and oxidative stability of the bulk PG as compared to the PEG and the easy accessibility of these materials, dendritic polyglycerols are novel and promising candidates as surface coatings for biomedical applications.     

Copper—A “Modern” Bioelement

Copper is a bioessential element in biology with truly unique chemical characteristics in its two relevant oxidation states +I and +II. Significant progress has been made in recent years in the elucidation of the frequently surprising biochemistry of this trace element. Those advances were especially furthered through mutual stimulation involving results from biochemistry, molecular biology, and medicine on one hand and the synthesis as well as the structural and spectroscopic characterization of low molecular weight model complexes on the other. The most notable features of protein-bound active copper are its almost exclusive function in the metabolism of O₂ or N/O compounds (NO, N₂O) and its frequent association with oxidizing organic and inorganic radicals such as tyrosyl, semiquinones, superoxide, or nitrosyl. This unique biological role of copper can be rationalized given its chemical and assumed evolutionary background.