光谱法研究酒石酸乙酰异戊酰泰乐菌素与牛血清白蛋白的相互作用及Zn2＋，Cu2＋的影响

酒石酸乙酰异戊酰泰乐菌素（ATLL）是一种新的大环内酯类兽用抗菌药,研究 ATLL与蛋白质的相互作用非常重要,这直接与 ATLL 在体内的药效相关。牛血清白蛋白（BSA ）结构上与人血清白蛋白（HSA）同源,因此,常用它作研究药物与蛋白质相互作用的蛋白模型。血液中有许多金属离子,已有关于体内单一离子对药物与蛋白质相互作用影响的研究,采用多光谱方法对ATLL与BSA相互作用及Zn2＋和Cu2＋的影响进行研究。结果表明,BSA的荧光猝灭属于静态猝灭,Zn2＋和Cu2＋分别使有效猝灭常数降低和增大。主要的相互作用力为氢键和疏水作用力。ATLL改变蛋白质色氨酸和酪氨酸的微环境极性。紫外光谱分析发现,Cu2＋可能是通过Cu2＋‐ATLL复合物以金属离子架桥作用来影响ATLL与BSA的作用,Zn2＋可能通过与ATLL的竞争作用结合BSA。红外光谱分析表明,ATLL使BSA的β‐折叠和α‐螺旋结构向β‐转角和无规卷曲转变。这些基础数据有助于阐明在生理条件下,有无Zn2＋,Cu2＋时ATLL与BSA的相互作用机制及金属离子在药物与蛋白质作用过程中对蛋白质功能的影响。     

金微/纳颗粒阵列的SERS效应研究

表面增强拉曼散射(surface-enhanced Raman scattering,简称为SERS)能够提供有机分子的指纹特征信息,且具有灵敏度高和响应时间快等优点,是一项具有发展前景的分析技术。纳米结构SERS基底是获得SERS信号的关键。本文利用简便的电沉积方法在硅片上制备大面积的金微/纳颗粒阵列。金纳米颗粒之间存在大量狭小的纳米间隙,在光激发下产生大量的SERS热点,从而具有很高的SERS灵敏度。而且,这种金微/纳结构具有高结构稳定性和化学稳定性。该结构对浓度低至10-12 M的罗丹明6G(R6G)具有很高的SERS灵敏性,且具有很好的SERS信号均匀性。利用这种微/纳结构阵列SERS基底,实现对水中低浓度农药甲基对硫磷的成功检测。这表明我们制备的金微/纳颗粒阵列在检测环境中的毒性有机物污染物方面具有潜在的应用前景。     

Flanking transmission of metal stud walls with different junction details

Measurements of the normalised flanking sound level difference of different gypsum board flanking walls are reported. Results of a “standard” wall construction confirmed some results of the current draft standard of DIN 4109. Different constructions with various junction details and different wall constructions are described and measurement results are presented. By additional measurements on the walls, a prediction model for the weighted flanking level difference is suggested, based on the methodology of EN 12354. For the flanking transmission prediction of path Ff, three transmission paths are proposed. The model gives good agreement between calculated and measured weighted flanking level difference except for the case where the transmission along the inner lining of the flanking wall is dominant. In this case the prediction underestimates measurements by up to 7 dB.     

High precision analysis of finlines on semiconductor substrate

In this study, the effect of the metallization thickness in finlines on semiconcuctor substrate is researched. The propagation parameters are computed to measure the inluence of the metallization. The theory and numerical results are presented to the propagation constant and characteristic impedance of the bilateral and unilateral finlines. The full wave analysis of the transverse transmission line — TTL method is used to determine the electromagnetic fields of the structure in Fourier transform domain — FTD. Applying the suitable boundary conditions, the moment method and expanding the fields in a set of suitable bases functions, a homogeneous matrix system is obtained and the propagation constant is computed. The characteristic impedance is obtained using the relation of the voltage in the slot and the transmitted power by the structure.Computational programs are developed to obtain numerical results to the propagation parameters composed by the propagation constant and characteristic impedance.This work received financial support by CAPES and CNPq.     

CdS films deposited by chemical bath under rotation

Cadmium sulfide (CdS) films were deposited on rotating substrates by the chemical bath technique. The effects of the rotation speed on the morphological, optical, and structural properties of the films were discussed. A rotating substrate-holder was fabricated such that substrates can be taken out from the bath during the deposition. CdS films were deposited at different deposition times (10, 20, 30, 40 and 50 min) onto Corning glass substrates at different rotation velocities (150, 300, 450, and 600 rpm) during chemical deposition. The chemical bath was composed by CdCl₂, KOH, NH₄NO₃ and CS(NH₂)₂ as chemical reagents and heated at 75 °C. The results show no critical effects on the band gap energy and the surface roughness of the CdS films when the rotation speed changes. However, a linear increase on the deposition rate with the rotation energy was observed, meanwhile the stoichiometry was strongly affected by the rotation speed, resulting a better 1:1 Cd/S ratio as speed increases. Rotation effects may be of interest in industrial production of CdTe/CdS solar cells.     

An aqueous route to organically functionalized silica diatom skeletons

Diatomaceous earth was functionalized by grafting organotrialkoxysilane precursors onto the surface of the porous silica cell walls of this biomineral. Vinyl- and mercapto-containing structures were prepared in aqueous media without disruption of the diatomic architecture. Successful grafting of the organic moieties was confirmed using solid state ²⁹Si MAS NMR spectroscopy, and the presence of the intact diatom framework by scanning electron microscopy. The sorption properties of mercaptopropyl-functionalized diatoms towards heavy metals was studied by measuring the accessibility and diffusion rates of mercury(II) species to the binding sites (-SH) by the means of electrochemical methods.     

Efficient removal of crystal violet and methylene blue from wastewater by ultrasound nanoparticles Cu-MOF in comparison with mechanosynthesis method

The present investigation reports the synthesis of CuBTC (BTC = 1,3,5-benzenetricarboxylate) metal–organic frameworks (MOFs) under solid-state conditions and ultrasound irradiation. Herein, we study uptake and release properties of crystal violet (CV) and methylene blue (MB) from ultrasound nano-CuBTC MOF in comparison with mechanosynthesis method (bulk structure). The ultrasound-assisted methods give a decrease in the surface area as calculated from the reduced nitrogen adsorption capability. In comparison, the uptake of guest molecules on ultrasound nano-CuBTC is remarkable and clearly exceeds that of bulk structure in the aqueous solution of guests. In bulk compound the channel length is increased so that the amount of adsorption is decreased a little. The small guest enters and leaves the cavity rapidly, whereas larger guests enter slowly due to their size relative to the size of the gaps in the capsule. As a result, the uptake and release of MB from CuBTC is faster than that of CV.     

The fabrication of ReS2 flowers at controlled locations by chemical vapor deposition

Here we report a metal induced nucleation to realize the growth of ReS₂ flowers at controlled locations. The ordered arrays of ReS₂ flowers have been successfully prepared on SiO₂/Si substrate using Pt metal dots as nucleation sites and S, NH₄ReO₄ powders as precursors by a chemical vapor depostion method. The NH₄ReO₄ powders are used as the rhenium sources. The ReS₂ flowers are grown above the pre-patterned Pt dots, Raman and transmission electron microscopy measurements indicated that the prepared ReS₂ flowers have excellent crystalline quality.     

Rectifying resistance switching behaviors of SnO2 microsphere films modulated by top electrodes

Based on the bipolar resistive switching (RS) characteristics of SnO₂ films, we have fabricated a new prototypical device with sandwiched structure of Metal/SnO₂/fluorine-doped tin oxide (FTO). The SnO₂ microspheres film was grown on FTO glass by template-free hydrothermal synthesis, which was evaporated with various commonly used electrodes such as aluminium (Al), silver (Ag), and gold (Au), respectively. Typical self-rectifying resistance switching behaviors were observed for the RS devices with Al and Au electrodes. However, no obvious rectifying resistance switching behavior was observed for the RS device with Ag electrode. Above results were interpreted by considering the different interface barriers between SnO₂ and top metal electrodes. Our current studies pave the ways for modulating the self-rectifying resistance switching properties of resistive memory devices by choosing suitable metal electrodes.     

污泥中重金属的形态分析及其可浸出性

以自来水厂和污水处理厂的污泥为研究对象,采用Tessier五步法和火焰原子吸收光谱法研究污泥中重金属（Zn、Cu、Cd、Ni、Mn）含量、形态分布以及可浸出性。结果发现,在自来水厂污泥和污水处理厂污泥中重金属总量大小依次为Zn〉Mn〉Ni〉Cu〉Cd,Zn〉Mn〉Cu〉Ni〉Cd,污泥中Zn含量最高,为448.17mg.kg-1;Cd含量最低,为27.17mg.kg-1,超过国家标准,限制了污泥的农用。Tessier形态分析结果表明,污泥中Zn、Cu、Cd主要以稳定态存在;Mn主要以有效态存在,潜在的迁移性和植物毒性最值得关注;Cu浸出率最高,为14.8%,Zn浸出率最低,为0.11%,因此浸出率不仅与金属和污泥的特性有关,而且金属在污泥中赋存的化学形态对其可浸出性也有重要的影响。