Selective detection of Fe(III) ions in aqueous solution with a 1,8-diacridylnaphthalene-derived fluorosensor

The syn-isomer of 1,8-bis(4,4′-diisopropyl-9,9′-diacridyl)naphthalene, 1, has been prepared by two consecutive Pd(PPh₃)₄-catalyzed Stille cross-coupling steps. This highly congested sensor undergoes Fe(III)-selective fluorescence quenching in water/acetonitrile even in the presence of excess of other metal ions.     

Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides

Iridium oxide films (IROFs) are known to have an enhanced or the so‐called super‐Nernstian (<59 mV/pH) pH‐sensitivity. The intention in the present study was to find out the reasons of such behavior and also to elucidate the nature of iridium anodic oxidation processes. The methods employed were combined cyclic voltammetry and chronopotentiometry. Iridium layers of 0.1 to 0.2 μm thickness, deposited thermally on titanium or gold‐plated titanium substrates, were used for investigations. IROFs on the surface of working electrodes were formed anodically by applying a constant potential in deaerated and oxygen‐containing solutions of 0.5 M H₂SO₄, 0.1 M KOH and 0.5 M H₃PO₄+KOH. Linear pH‐dependences of the stationary open‐circuit potential with the slopes close to 59 mV/pH were found for iridium electrode oxidized at 0.4 V–0.8 V (RHE) in deaerated and at 0.8 V–1.2 V (RHE) in O₂‐containing solutions. They were attributed to reversible Ir/Ir(OH)₃ and Ir/ IrO₂?nH₂O metal‐oxide electrodes, respectively. It has been suggested that the main current peaks seen in the voltammograms of iridium electrode in acid and alkaline solutions are of different nature. The difference between iridium electrode surface states in acid and alkaline solutions has been presumed to be the main reason of super‐Nernstian pH‐sensitivity of the IROFs. On the basis of the results obtained standard potential of Ir/Ir(OH)₃ electrode and the solubility product of Ir(OH)₃ have been evaluated: =0.78±0.02 V and K_sp=3.3×10^?64.     

Branched and dendritic metallo-carbosiloxanes with OCH2PPh2MLn end-grafted units

A straightforward method for the preparation of metallo carbosiloxanes of type Si(OCH₂CH₂CH₂SiMe₂[OCH₂PPh₂M(CO)_n])₄ (n = 3, M = Ni, 7a; n = 4, M = Fe, 7b; n = 5: M = Mo, 7c; M = W, 7d), Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₄ (8) and Me₂Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₂ (11) is described. The reaction of Si(OCH₂CH₂CH₂SiMeXCl)₄ (1: X = Me, 2: X = Cl) or Me₂Si(OCH₂CH₂CH₂SiMeCl₂)₂ (9) with HOCH₂PPh₂ (3) produces Si(OCH₂CH₂CH₂SiMe₂(OCH₂PPh₂))₄ (4), Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₄ (5) or Me₂Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₂ (10) in presence of DABCO. Treatment of the latter molecules with Ni(CO)₄ (6a), Fe₂(CO)₉ (6b), M(CO)₅(Thf) (6c: M = Mo; 6d: M = W), respectively, gives the title compounds 7a-7d, 8 and 11 in which the PPh₂ groups are datively bound to a 16-valence-electron metal carbonyl fragment.The formation of analytical pure and uniform branched and dendritic metallo carbosiloxanes is based on elemental analysis, and IR, ¹H, ¹³C{¹H}, ²⁹Si{¹H} and ³¹P{¹H} NMR spectroscopic studies. In addition, ESI-TOF mass spectrometric studies were carried out.     

Building three-dimensional metal phosphites from the corner-shared four-membered rings chain

Three new compounds, a one-dimensional (1D) zinc phosphite, (C₄H₈N₂H₄)[Zn(HPO₃)₂] (I), two three-dimensional (3D) metal phosphites (C₄H₈N₂H₄)[Zn₃(HPO₃)₄] (II) and (C₄H₈N₂H₄)[Zn_(3−x)Co_x(HPO₃)₄(H₂O)₂] (x≈0.83) (III) have been synthesized under hydrothermal conditions templated by piperazine and characterized by single-crystal X-ray diffraction, XRD, IR, UV-vis spectra and SQUID magnetometer. Compound I displays 1D chain-like structure, containing corner-shared (cs) four-membered rings. Interestingly, the structures of II and III show 1D chains similar to those observed in I. It is noteworthy that III represents the first cobalt-substituted zinc-phosphite. Crystal data: I, monoclinic, C2/c, a=17.748(2) Å, b=7.428(9) Å, c=8.8071(11) Å, β=105.345(3)°, V=1091.9 Å³, Z=4. II, Monoclinic P2₁/c, a=9.9435(4) Å, b=10.1438(3) Å, c=17.8164(5) Å, β=95.665(2)°, V=1788.27 Å³, Z=4, and III, Monoclinic P2₁/c, a=7.2338(2) Å, b=15.0238(5) Å, c=9.2153(3) Å, β=107.741(2)°, V=953.88(5) Å³, Z=2.     

Nanorods of Various Oxides and Hierarchically Structured Mesoporous Silica by Sol-Gel Electrophoresis

In this paper, we report the template-based growth of nanorods of oxides and hierarchically structured mesoporous silica, formed by means of a combination of sol-gel processing and electrophoretic deposition. Both single metal oxides (TiO₂) and complex oxides (Pb(Zr_0.52Ti_0.48)O₃) have been grown by this method. This method has also been applied to the growth of nanorods of mesoporous silica having an ordered pore structure, where the pores are aligned parallel to the long axis of the nanorod. Uniformly sized nanorods of about 125–200 nm in diameter and 10 m in length were grown over large areas with near unidirectional alignment. Appropriate sol preparation yielded the desired stoichiometric chemical composition and crystal structure of the oxide nanorods, with a heat treatment (500–700°C for 15–30 min) for crystallization, densification and any necessary pyrolysis.     

Selective extraction of U(VI) over Th(IV) from acidic streams using di-bis(2-ethylhexyl) malonamide anchored chloromethylated polymeric matrix

A new chelating polymeric sorbent has been developed using Merrifield chloromethylated resin anchored with di-bis (2-ethylhexyl) malonamide (DB2EHM). The modified resin was characterized by CPMAS NMR spectroscopy, FT-NIR-FIR spectroscopy, CHN elemental analysis and also by thermo gravimetric analysis. The fabricated sorbent showed superior binding affinity for U(VI) over Th(IV) and other diverse ions, even under high acidities. Various physio-chemical parameters, like solution acidity, phase exchange kinetics, metal sorption capacity, electrolyte tolerance studies, etc., influencing the resin’s metal extractive behavior were studied by both static and dynamic method. Batch extraction studies performed over a wide range of solution acidity (0.01-10 M) revealed that selective extraction of U(VI) could be achieved even up to 4 M acidity with distribution ratios (D) in the order of ∼10³. The phase exchange kinetics studies performed for U(VI) and Th(IV) revealed that time duration of <15 min was sufficient for >99.5% extraction. But similar studies when preformed for trivalent lanthanides gave very low D values (<50), with the extraction time extending up to 60 min. The metal sorption studies performed for U(VI) and Th(IV) at 5 M HNO₃ was found to be 62.5 and 38.2 mg g⁻¹,respectively. Extraction efficiency in the presence of inferring electrolyte species and inorganic cations were also examined. Metal ion desorption was effective using 10-15 mL of 1 M (NH₄)₂CO₃ or 0.5 M α-hydroxy isobutyric acid (HIBA). Extraction studies performed on a chromatographic column at 5 M acidity were found to give enrichment factor values of 310 and 250 for U(VI) and Th(IV), respectively. The practical utility of the fabricated chelating sorbent and its efficiency to extract actinides from acidic waste streams was tested using a synthetic nuclear spent fuel solution. The R.S.D. values obtained on triplicate measurements (n = 3) were within 5.2%.     

Synthesis and structural studies of complexes of Sb(III) and Bi(III) with thiosemicarbazones

Summary Several new complexes of Sb(III) and Bi(III) with thiosemicarbazones of furfuraldehyde, thiophene-2-carbaldehyde, indol-3-carbaldehyde and pyridine-2-carbaldehyde have been prepared and characterized by elemental analysis, conductivity, molecular weight determination and IR,¹H-and¹³C-NMR spectral studies. The ligands form complexes of the typeMX ₃ L[M=Sb(III) or Bi(III);X=chloride;L=ligand] which are found to be non-electrolytes inDMF. Spectral data indicate that the thiosemicarbazones act as bidentate ligands through the azomethine nitrogen and sulphur.

---

Synthese und Strukturuntersuchungen an Komplexen von Sb(III) and Bi(III) mit Thiosemicarbazonen

Zusammenfassung Es wurden einige neue Komplexe von Sb(III) und Bi(III) mit Tiosemicarbazonen von Furfural, Thiophen-2-carbaldehyd, Indol-3-carbaldehyd und Pyridin-2-carbaldehyd hergestellt und mittels Elementaranalyse, Leitfähigkeitsmessungen, Molekulargewichtsbestimmungen und IR-,¹H- bzw.¹³C-NMR-Spektroskopie charakterisiert. Die Komplexe sind vom TypMX ₃ L[M=Sb(III) oder Bi(III);X=Chlorid;L=Ligand] und sind inDMF Nichtelektrolyten. Die spektroskopischen Daten zeigen, daß die Thiosemicarbazone als zweizähnige Liganden über den Azomethin-Stickstoff und Schwefel wirken.

     

New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.     

Novel calix[4]arene-thiacrown ether for selective and efficient extraction of Ba(II), Pb(II), and Hg(II)

A di-ionizable p-tert-butylcalix[4]arene-1,3-thiacrown-5 ether extractant was synthesized. Its cone conformation and polyether ring attachment regioselectivity were verified by NMR spectroscopy. The metal ion-complexing properties of this ligand were evaluated by solvent extractions of metal cations from aqueous solutions into chloroform. The ligand was found to be an efficient extractant with Ba²⁺ selectivity in competitive solvent extraction of alkaline earth metal cations. It also exhibits high extraction ability for Pb²⁺ and for Hg²⁺ in single species solvent extractions.     

Synthesis and characterization of new strontium 4-carboxyphenylphosphonates

Several new strontium 4-carboxyphenylphosphonates, i.e., two modifications of Sr(HOOCC₆H₄PO₃H)₂, SrH(OOCC₆H₄PO₃)·H₂O, Sr₃(OOCC₆H₄PO₃)₂·4H₂O and Sr₃(OOCC₆H₄PO₃)₂·5.7H₂O were prepared and characterized by elemental analysis, thermogravimetry, X-ray powder diffraction and infrared spectroscopy. It was found that the compositions of these compounds depend on the acidity of the reaction medium. In addition, the presented compounds are interconvertible in dependence on pH. The position of the acid hydrogen atom in SrH(OOCC₆H₄PO₃)·H₂O was determined from the IR spectra of the studied compounds.The structure of the β modification of Sr(HOOCC₆H₄PO₃H)₂ was solved from its X-ray powder diffraction pattern using an ab initio method (the FOX program) with subsequent Rietveld refinement in the FULLPROF program. The compound is monoclinic, with the space group P2₁/c (No. 14), a=49.88(2), b=7.867(2), c=5.602(3) Å, β=128.68(2)°, and Z=4. It has a one-dimensional structure with an inorganic part built of SrO₈ distorted tetragonal antiprisms.