金属铜升温熔化过程的分子动力学模拟

采用分子动力学方法模拟了金属铜的升温熔化过程.原子间作用势采用FS (Finnis-Sinclair)势，结构分析采用双体分布函数(PCF)、均方位移(MSD)等方法.计算结果表明,在连续升温过程中，金属铜在1444 K熔化，在该熔化点的扩散系数为4.31×10－9 m2•s－1.上述结论与实验值相当接近，并且比之采用EAM镶嵌原子势所作模拟得到的结果更佳，说明FS势可以用来处理象液铜这样较复杂的无序体系.本文指出了升温速率在金属熔化过程中所起的作用.     

A strategy for synthesis of polymer-protective bimetallic colloids

A strategy for the synthesis of polymer-protective bimetallic sols is proposed which has the advantage of the strong protective effect of the polymer agent on one of the composites to stabilize the bimetallic colloidal particles. This strategy is certified to be useful to the predication of the formation of stable bimetallic colloids protected by polymer and to the control of the particle size to a certain extent. A series of new PVP-protective bimetallic colloidal dispersions containing noble metal element (Pt, Rh, Pd), light transition metal element (Co, Fe), and boron are obtained from the corresponding salts by the methods of reduction by stage and coreduction, using the NaBH4 as reductant. The TEM, XRD and EPMA measurements indicate the formation of bimetallic colloids. An interesting kind of coil aggregation is observed in the systems of PVP-Pt-Co and PVP-Rh-Co prepared by the method of reduction by stage.     

Aggregation of iron colloids in estuaries: a heterogeneous kinetics study using continuous mixing of river and sea waters

The kinetics of iron colloid aggregation in estuaries have been simulated with a model estuary in which seawater is continuously pumped into a reservoir initially containing river water. Profiles of colloidal Fe concentration versus salinity produced in this apparatus closely resembled field data for actual estuaries. Synthetic Fe colloids prepared by peptising Fe(OH)₃ with humic acid and phosphate showed very similar kinetic behaviour. Aggregation rate was found to be almost independent of velocity shear rate, implying that most aggregations are induced by brownian interparticle collisions. A heterogeneous kinetic model is proposed to explain the kinetic behaviour of Fe colloids during seawater-induced aggregation. This model describes kinetic behaviour in terms of a log-normal distribution of rate constants characterised by a mean value k and a standard deviation γ. Experiments showed that k is linearly related to the rate constant for salinity increase during mixing. This coupling of salinity changes and aggregation rate leads to Fe-salinity profiles that are nearly independent of the rate of salinity change, but which are dependent on γ.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

Nanotechnology with soft materials.

Nature exploits self-organization of soft materials in many ways, to produce cell membranes, biopolymer fibers and viruses, to name just three. Mankind is now able to design materials at the nanoscale, whether through atom-by-atom or molecule-by-molecule methods (top-down) or through self-organization (bottom-up). The latter method encompasses soft nanotechnology. Self-organization of soft materials can be exploited to create a panoply of nanostructures for diverse applications. The richness of structures results from the weak ordering because of noncovalent interactions. Thus, thermal energy is important as it enables transitions between phases with differing degrees of order. The power of self-organization may be harnessed most usefully in a number of nanotechnology applications, which include the preparation of nanoparticles, the templating of nanostructures, nanomotor design, the exploitation of biomineralization, and the development of functionalized delivery vectors.     

Effect of Glass Substrates on the Formation of Gold-Silver Colloids in Nanocomposite Thin Films

A sol-gel route to synthesize nanocomposite thin films containing phase separated metal colloids of gold (Au) and silver (Ag) was developed. Ag—Au colloids were prepared in silica films using dip coating technique. The annealing of the samples in air results in the formation of phase separated Ag and Au colloids in SiO₂ thin films, showing the surface plasmon peaks at 410 nm and 528 nm. For the synthesis of phase separated Ag and Au colloids on float glass substrates, formation of the silver colloids was found strongly dependent on the surface of the float glass. On the tin rich surface formation of both gold and silver colloids took place, whereas, on the tin poor surface the formation of only gold colloids was observed. The surface dependence of the formation of silver colloids was attributed to the presence of tin as Sn²⁺ state on the glass surface, which oxidizes into Sn⁴⁺ during heat treatment, reducing Ag⁺ into silver colloids.     

Experimental evidence of structural transition from fcc to bulk bcc in nanophase metal clusters of (Fe)n, (Cr)n, (Mo)n and (W)n produced by CO2 laser multiphoton decomposition of metal carbonyls

We have produced nanophase metal clusters, (Fe)_n, (Cr)_n, (Mo)_n and (W)_n, by multiphoton decomposition of the corresponding metal carbonyls with a 10.6 μm CO₂ laser in the presence of Ar and SF₆. The size distribution was narrow and the average diameter was 6, 3.5, 2 and 1 nm for Fe, Cr, Mo and W clusters, respectively. The structure was found to be bcc for both Fe and Cr clusters, fcc for Mo clusters, and amorphous for W clusters (note that all the bulk metals have bcc structure). Considering the cluster sizes (9630, 1870, 230 and 30 for Fe, Cr, Mo and W clusters, respectively) estimated from their average diameters, it is likely that there exists a structural transition from fcc to bulk bcc with increasing cluster size in these metal clusters.     

Synthesis of amberlite XAD-2-PC resin for preconcentration and determination of trace elements in food samples by flame atomic absorption spectrometry

A new chelating sorbent has been developed using Amberlite XAD-2 resin anchored with pyrocatechol through –N=C– group. This sorbent, characterised by elemental analysis and infrared (IR) spectra, was used as packing for the minicolumn in an on-line system preconcentration system for cadmium, cobalt, copper and nickel determination. Metal ions were sorbed in the minicolumn, from which it could be eluted directly to the nebulizer–burner system of the flame atomic absorption spectrometer (FAAS). Elution of all metals from minicolumn can be made with 0.50 mol L^− 1 HCl or HNO₃. The enrichment factors obtained were 16 (Cd), 24 (Co), 15 (Cu) and 19 (Ni), for 60 s preconcentration time, and 39 (Cd), 69 (Co), 36 (Cu) and 41 (Ni), if used 180 s preconcentration time. Under the optimum conditions, the proposed procedure allowed the determination of cadmium, cobalt, copper and nickel with detection limits of 0.31, 0.32, 0.39 and 1.64 μg L^− 1, respectively, when used preconcentration periods of 180 s. The accuracy of the developed procedure was sufficient and evaluated by the analysis of the certified reference materials NIST 1515 apple leaves and NIST 1570a spinach leaves. The method was applied to the analysis of food samples (spinach, black tea and rice flour).     

Studies on tetra-amine phthalocyanines

Metal(II) tetranitro phthalocyanines of cobalt, nickel and copper are synthesized in pure state by a novel modified method. The complexes are characterized using elemental, electronic and IR spectral studies. Pure metal(II) tetra-amino phthalocyanines of cobalt, nickel and copper are synthesized by reducing the nitro groups of the above complexes using sodium sulphide. These complexes are also characterized by elemental, electronic, IR spectral and magnetic susceptibility measurements. The nature of the electrical conductivities of the above three metal(II) tetra-amino phthalocyanine derivatives are studied in the temperature range 303-473 K and the data are presented. Among the effect of various substituent groups on the electrical conducting property of phthalocyanine, amine group substituent on the peripheral benzene ring of the phthalocyanine molecule has been found to increase electrical conductivity to a greatest extent. These complexes showed about 10⁵-10⁶ times higher electrical conductivities compared to their parent phthalocyanine compounds.