比较与研究金属离子与三种蛋白的配位机理

本文通过测定牛血红蛋白、人血清蛋白、伴刀豆球蛋白Ａ与过渡态金属离子Ｃｒ（Ⅲ）、Ｆｅ（Ⅲ）在不同条件下的荧光强度变化来揭示蛋白质与金属离子形成络合物的配位点，从而确定所形成配合物的结构，并讨论了溶液ＰＨ值对蛋白质荧光强度的影响。另外，对金属离子与蛋白质体系进行了荧光偏振的研究。     

抗菌素阿莫西林荧光分析法的研究

本文提出了阿莫西林［（2S,5R,6R）-3,3-二甲基-6-［(R)-(-)-2-氨基-2-(4-羟基苯基)乙酰氨基］-7-氧化-4-硫杂-1-氮杂双环［3,2,0］庚烷-2-甲酸三水化合物］荧光分析的方法。并对影响阿莫西林荧光性质(光谱和光谱强度)的各种因素,包括pH值、表面活性剂的增效作用、无机离子的配合作用以及其他介质条件等进行了较为详细的研究。实验结果表明,阿莫西林具有良好的荧光性质,在微碱性条件下荧光发射最强,CTAB对其有增效作用,与无机离子(Mg     

金、铜、铂、银表面光学二次谐波参数的研究

以1.06μm激光为基频光,测量了金、铜、铂、银膜的反射二次谐波随基频光偏振角的变化,在b=-1的条件下拟合求得了这几种样品面谐波电流的唯象参数“a”值。     

中药白茅根中金属元素的含量测定

火焰原子吸收光谱法测定中草药白茅根茎部的Fe、Cu、Zn、Mn、Ca、Mg,方法简单、精密度好、回收率在92.0%-104.4%之间,相对标准偏差(RSD)小于1.8%,结果令人满意.     

金属表面硅烷试剂膜结构及性能表征方法

综述了用硅烷试剂处理金属表面而形成的保护膜性能及结构的表面分析方法。详述了X射线光电子能谱、红外光谱、次级离子质谱、椭圆光谱、电化学阻抗谱等方法在硅烷处理金属表面过程中的应用 ,通过对膜形成的机制、膜的键合方式、膜结构、膜厚度以及膜的耐蚀性等方面的研究分析 ,探讨了它们对膜性能的影响 ,并用各种不同的参数表征了金属基材上硅烷膜的特性。同时指出了所述各种表面分析方法用于金属表面硅烷膜分析和检测的优点和不足之处 ,讨论了将各种表面分析技术联用起来以期得到更多有用的化学信息 ,以此可以指导硅烷化金属表面处理工艺过程。此外还提到了其他可用于金属表面硅烷膜性能的表征的分析技术 ,展望了金属表面硅烷膜分析的研究。     

Water stability of cobalt doped ZIF-8: a quantitative study using optical analyses

Zeolitic imidazolate frameworks (ZIFs), in particular ZIF-8 (made of Zn²⁺ and 2-methyilimidazolate) and cobalt-doped-ZIF-8, are found important for many energy and environmental applications. It was reported that ZIFs show excellent structural stability in water and thus ideal for aqueous applications. However, recent studies also found some evidence that ZIF-8 undergoes hydrolysis in water. Despite the importance of ZIF's stability in many aqueous applications, the extent of ZIFs' degradation in water is still not yet fully understood. In this study, we report a quantitative study of the water stability of 0–100 at% cobalt-doped ZIF-8, using a new combination of analytical tools. The study demonstrated the importance of analyzing both filtered powders and the filtrate liquid systematically, in particular by using UV–Vis spectroscopy and thermogravimetric analysis. The combination of analytical tools allowed the study on the effects of ZIF concentrations in water, cobalt doping levels, and amounts of ligands in water on the water stability of ZIF samples. The effect of cobalt-doping was investigated by using ZIF particles with identical sizes (200–400 nm), in order to eliminate the effects of particle size on hydrolysis. Unlike other synthesis methods, a mechanochemical ball milling method allowed the production of nano-scale ZIF-8 particles with similar sizes, independent of cobalt-doping levels. The proposed combination of analytical tools including UV–Vis spectroscopy can be applied to the study of the water stability of other MOF materials.     

Mixed Fano-SP resonant absorption of THz electromagnetic waves in a photonic resonator contacting with a metal film

In terahertz frequency region, we have investigated theoretically the correlation between spectra of a free photonic structure and that deposited on a metal for several models of metal. It was found that for quasi-normal incidence of p-polarized electromagnetic field the presence of metal generates narrow spectral wells in the middle of reflection windows existing in a free photonic crystal. Quite another manifestation of metal-resonator inter-influence takes place at incident angles exceeding the Brewster angle when reflection spikes coincide with modes of photonic crystal resonator and they are absent throughout the stopband areas. The effects are strongly depended on polarization, number of periods and angle of incidence.     

Rectifying resistance switching behaviors of SnO2 microsphere films modulated by top electrodes

Based on the bipolar resistive switching (RS) characteristics of SnO₂ films, we have fabricated a new prototypical device with sandwiched structure of Metal/SnO₂/fluorine-doped tin oxide (FTO). The SnO₂ microspheres film was grown on FTO glass by template-free hydrothermal synthesis, which was evaporated with various commonly used electrodes such as aluminium (Al), silver (Ag), and gold (Au), respectively. Typical self-rectifying resistance switching behaviors were observed for the RS devices with Al and Au electrodes. However, no obvious rectifying resistance switching behavior was observed for the RS device with Ag electrode. Above results were interpreted by considering the different interface barriers between SnO₂ and top metal electrodes. Our current studies pave the ways for modulating the self-rectifying resistance switching properties of resistive memory devices by choosing suitable metal electrodes.     

Surface-enhanced Raman scattering effect of gold nanoparticle arrays: The influence of annealing temperature,excitation power and array thickness

Gold nanoparticle arrays are fabricated for surface-enhanced Raman scattering (SERS) and the effect of the annealing temperature, the thickness of nanoparticle array and the exciting power on the SERS signals are investigated. The particle distribution and particle size are dense and uniform on the glass substrate when the 10 nm gold film was annealed at 250 °C and strong SERS signals for Rhodamine 6G were achieved via a 532 nm excitation with a 10 mW power. The SERS signal at 1650 cm⁻¹ is enhanced more than 10 times as compared to that of the gold film without annealing. The strong SERS behavior of gold nanoparticle arrays may broaden the SERS applications in biomedical and analytical chemistry.     

Optical transmission through an interface between subwavelength slits

This paper studies optical transmission through an interface between two slits with different widths in a sheet composed of an ideal conductor. Such a structure is of potential use in fabricating optical diode and may be the simplest one compared to other designs. Our calculations show that there is a critical wavelength. When the light wavelength is below the critical wavelength, the transmissivity is unidirectional. The expression of the stable transmissivity as a function of the ratio of the widths of the two slits was obtained analytically. Particularly, at the critical wavelength, the transmissivities are zero. This phenomenon has great potential for application in the manufacture of wavelength blockers.