Preparation and characterization of poly(amidoamine) dendrimers functionalized with a rhenium carbonyl complex and PEG as new IR probes for carbonyl metallo immunoassay

The first poly(amidoamine) (PAMAM) dendrimers tethered with both (η⁵-cyclopentadienyl) rhenium tricarbonyl (CpRe(CO)₃) units and polyethylene glycol (PEG) chains were prepared and characterized by combining NMR spectroscopy and Fourier-transform IR spectroscopy. Grafting of CpRe(CO)₃ units was achieved by reductive amination of formyl-CpRe(CO)₃ with the peripheral amines of generation 3 and 4 PAMAMs to yield dendrimers labeled with a variable number of CpRe(CO)₃ units, ranging from 8 to 14 for PAMAM-G3 and 17-30 for PAMAM-G4. PEG chains of different lengths were then attached to some of the remaining peripheral amines, and their respective ability to improve the solubility of the metallodendrimers in aqueous buffered media was evaluated. These metallodendrimers represent new infrared probes designed to be coupled to immunological reagents for the amplification of the IR signal in carbonyl metallo immunoassay (CMIA).     

Hochschild Cohomologies of the Algebra of Smooth Functions

Based on the previously developed technique using the Laplace transformation of distributions with compact support, we calculate the Hochschild cohomologies of the algebra of smooth functions on a finite-dimensional real vector space with coefficients in the adjoint representation.     

Volume Chemistry of Nitrogen in Binary Metal Nitrides and Subnitrides

A comparison of the concept of volume increments created by W. Biltz with that based on quantum mechanical calculations by R.F.W. Bader was performed for crystal structures of binary metal nitrides and ‐subnitrides. The mutual comparison of both concepts permits insights into the bonding relationships of these compounds and reveals the considerable range of volume demand of a strongly polarisable bonding partner, such as the nitride ion. Finally it becomes clear that the Biltz volume increments show a quantum‐chemical relevance in the chemistry of solids.     

The millimeter wave spectrum of the CO dimer

The millimeter wave spectrum of the isotopically substituted CO dimer, (¹³C¹⁶O)₂, has been studied for the first time, confirming and extending a recent infrared study. Eighty-seven transitions in the 77-180 GHz region have been assigned and analyzed in terms of a model-independent term value scheme involving 57 rotational levels with J=0-8. The levels can be classified into 7 “stacks” which have symmetry classifications of either A⁻/B⁺ or A⁺/B⁻ and K-values of either 0 or 1. For the normal isotope, symmetry and nuclear spin statistics cause alternate rotational levels to be missing, but for (¹³C¹⁶O)₂ all levels are present with an intensity alternation of 1:3 between A and B symmetries. The four A⁻/B⁺ stacks have not previously been observed, and the lowest of them establishes the tunneling splitting of (¹³C¹⁶O)₂ to be 3.769 cm⁻¹, slightly larger than the (¹²C¹⁶O)₂ value of 3.731 cm⁻¹. A large amount of precise experimental data is now available for the CO dimer, which should lead to greater theoretical insight into its structure and tunneling dynamics.     

NMR studies on a palladium(II) complex containing an incompletely coordinated facultative pentadentate Schiff base ligand

Palladium(II) dichloride reacts with 1,10‐bis(2‐pyrrolyl)‐2,5,9‐triaza‐1,9‐decadiene to give a [Pd(C₁₅H₂₀N₅)]Cl complex in which the ligand is four‐coordinated, leaving one pyrrole group dangling. By using COSY, gHSQC, gHMBC connectivities and NOE experiments it has been concluded that one linkage isomer exists in DMSO solution, in spite of the fact that different sets of N atoms of potentially pentadentate ligand might be involved in coordination, and that the three chelate rings in the complex cation are arranged in a sequence: five‐membered, six‐membered, five‐membered which is different from that (5–5–6) found by x‐ray studies on the related [Ni(C₁₅H₂₀N₅)]Cl compound. NMR studies allowed an unambiguous assignment of all ¹H and ¹³C NMR resonances for the complex. Results of x‐ray structural analysis of [Pd(C₁₅H₂₀N₅)](CH₃COO)H₂O supported the five‐membered, six‐membered, five‐membered ring sequence in the [Pd(C₁₅H₂₀N₅)]⁺ complex cation and show an E (trans) orientation of the dangling pyrrole group with respect to the metal center. Copyright © 2002 John Wiley & Sons, Ltd.     

双金属氰化络合物催化剂的形态及其对催化剂活性的影响

合成了多个基于钴氰化锌的双金属氰化络合物(DMC)催化剂,并对催化剂的结晶形态进行了表征.考察了制备过程中,有机配体及其引入方式,温度,搅拌速度对DMC催化剂形态的影响.其中有机配体对DMC催化剂形态的影响是最主要的.有机配体中富电子原子的电负性的强弱和数量共同影响着DMC催化剂的形态.该类原子的电负性越强,得到的DMC催化剂的结晶性越差,无定型部分的比例越高,并且单个原子的电负性强弱比该类原子的数量在此间的影响更大.而在有机配体预先存在的情况下,该沉淀体系则更有利于无定型部分的产生.在30℃左右的沉淀反应温度下,得到的DMC催化剂的无定型部分比例最高.在有机配体存在的情况下,搅拌速度对DMC催化剂形态的影响有限.并且发现存在于有机配体中的DMC催化剂随着时间的推移,形态会发生变化.初步揭示了DMC催化剂的形态与其催化活性间的关系.而无定型态的DMC催化剂更有利于PO的聚合.     

双（十二烷基亚磺酰）乙烷溶剂萃取钯及其机理的研究

本文研究用双（十二烷基亚磺酰）乙烷萃取钯的性能，在ＫＩ存在下从７ｍｏｌ／Ｌ盐酸介质中用含有ＢＤＳＥ的氯仿能定量萃取钯，有机的钯可被硫脲或氨溶液反萃继之用ＴＭＫ－ＴｒｉｔｏｎＸ－１００光度法测定，研究了萃取的最佳条件及干扰情况，斜率法测得萃合物组成为Ｐｄ：Ｉ：ＢＤＳＥ＝１：２：１，红外光谱证实萃合物中ＢＤＳＥ的二个亚砜以硫原子与钯配位，萃合物为异位体络合物，提出了选择性萃取分离钯的新方法。     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

Formulation and survey of ALE method in nonlinear solid mechanics

This paper investigates the applicability and accuracy of existing formulation methods in general purpose finite element programs to the finite strain deformation problems. The basic shortcomings in using such programs in these applications are then pointed out and the need for a different type of formulation is discussed. An arbitrary Lagrangian-Eulerian (ALE) method is proposed and a concise survey of ALE formulation is given. A consistent and complete ALE formulation is derived from the virtual work equation transformed to arbitrary computational reference configurations. Differences between the proposed formulations and similar ones in the literature are discussed. The proposed formulation presents a general approach to ALE method. It includes load correction terms and is suitable for rate-dependent and rate-independent material constitutive law. The proposed formulation reduces to both updated Lagrangian and Eulerian formulations as special cases.