Metal grid technologies for flexible transparent conductors in large-area optoelectronics

Mechanically flexible optoelectronic devices such as flexible displays, touch-screens, wearable electronics and solar cells are attracting significant commercial interest. In these devices, a transparent conductor is an essential element that delivers or collects the electrical current to the active material while it allows light to enter or exit from the device. The transparent conductor is composed of a transparent conductive film and a metallic grid providing electrical conduction over the large area. In this article, we review the established processes used by the industry as well as emerging solution-based methods for processing metal grids. Furthermore, we review the issues and potentials of these emerging processes facing for large-area deployment. In the final section, we evaluate three applications of flexible transparent conductors in: perovskite-based solar cells, organic light emitting diodes and electrochromic windows.     

The fundamental features and characteristics of discharge and plasma ion sources

An analysis of some of the fundamental and special physical processes occurring in discharge and plasma ion sources is presented.

The main purpose of the lecture is to present to the users of ion sources some key elements of information, of which not all may be generally recognised and which hopefully will be of value for a better understanding of the operational problems related to the complex behaviour of discharge and plasma ion sources.     

Anomalous heat evolution of deuteron implanted al upon electron bombardment III - try to observe the nuclear d-d reaction

In previous papers, one of the authors (K. K.) has observed the anomalous melting of the surface layer of deuteron implanted Al, containing so-called "tunnel structures", on the electron bombardment in transmission electron microscope. In the present paper, we intended to observe the evidence of the d-d nuclear reaction, expecting neutron emission, associated with the melting phenomenon. However, the result was rather unexpected. The melting phenomenon was certainly observed under the same experimental conditions as before. But, in spite of the melting, neutron emission associated with the nuclear reaction was not observed. And, more unexpectedly, X-ray emission of energy less than roughly 400 v keV was observed when specimens with a bubble structure, which never showed melting, were bombarded with electron beams. Several conceivable mechanisms are discussed which, however, are all not convincing to explain the melting. The melting is attributed to some excess energy generation. The error estimation of the radiation measurements was undertaken.     

Mixed Fano-SP resonant absorption of THz electromagnetic waves in a photonic resonator contacting with a metal film

In terahertz frequency region, we have investigated theoretically the correlation between spectra of a free photonic structure and that deposited on a metal for several models of metal. It was found that for quasi-normal incidence of p-polarized electromagnetic field the presence of metal generates narrow spectral wells in the middle of reflection windows existing in a free photonic crystal. Quite another manifestation of metal-resonator inter-influence takes place at incident angles exceeding the Brewster angle when reflection spikes coincide with modes of photonic crystal resonator and they are absent throughout the stopband areas. The effects are strongly depended on polarization, number of periods and angle of incidence.     

Metal ion capacitor composed of the thin-walled surfaces enabling high-rate performance and long cycling stability

Electrochemical capacitors (referred to as supercapacitors) have high power density, long cycling stability, and are eco-friendly for use in electronic applications. The proper and stable utilization of supercapacitor systems can expand the practical scope of energy-powering applications in various device platforms. Nevertheless, the low energy density of conventional oxide and sulfide electrode materials still limits the practical realization of supercapacitor devices in real electronic applications. This limitation results from the poor surface stability, structural collapse, and low electrical conductivity of the oxide and sulfide materials. Single metal electrodes with multivalent metal ions exhibit promising energy-storing kinetics and may be viable alternatives to these oxide and sulfide electrode materials. Here, we report a metal zinc (Zn) electrode supercapacitor (ZIC) consisting of a thin-walled architecture as an electrode by means of a voltage-controlled electroplating method. The optimized ZIC exhibited excellent pseudo-capacitive performance, excellent high-rate performance, and an outstanding cycling stability.     

不同浓度的尾砂胶结充填体破坏过程 声发射特性试验研究*

制备了3种不同质量浓度的充填体试件,进行了单轴压缩声发射试验,分析了不同浓度的充填体力学特性,重点研究了试件破坏过程中的声发射振铃计数、声发射累计撞击数与声发射累计能量的比值(r值)、主频及其相对高频信号激增响应系数特征。研究表明：随着浓度的增加,充填体的峰值强度与弹性模量呈增大趋势,充填体中出现的声发射累计振铃计数越多;r值先升高再持续减小到一个较低值,随着外载荷的增加,进入缓慢升高阶段,峰值前均保持在该阶段。充填体破裂前兆信息在声发射信号主频分布中呈现主频段增多现象,表现为由加载初期的1~2个主频段,在临界主破裂时增多到3~5个主频段;且随着浓度的增加,声发射信号主频频段分布越宽,声发射相对高频信号(160~180 kHz)的激增响应系数呈递减趋势。以上特征可为不同浓度的尾砂胶结充填体稳定性监测、预测提供依据。     

第三族金属氧化物离子对二氧化碳转化的红外光谱研究

本文利用红外光解离光谱研究了第三族金属氧化物离子对二氧化碳分子的转化机制. 研究表明,对于[ScO(CO₂)_n]⁺体系,在n≤4时,形成了溶剂化结构;在n=5时,形成了碳酸盐结构,实现了二氧化碳的转化. 对于[YO(CO₂)_n]⁺体系,需要4个二氧化碳分子就可以实现二氧化碳的转化. 而在[YO(CO₂)_n]⁺体系中,只发现了溶剂化结构,没有观察到碳酸盐结构. 理论计算表明,[YO(CO₂)_n]⁺体系拥有最小的溶剂化结构向碳酸盐结构转化能垒,[LaO(CO₂)_n]⁺体系拥有最大的溶剂化结构向碳酸盐结构转化能垒. 本文从分子水平揭示了不同金属氧化物离子对二氧化碳分子转化的影响规律.     

表面增强拉曼散射(SERS)衬底的研究及应用

表面增强拉曼散射(surface enhanced Raman scattering,SERS)是通过吸附在粗糙金属表面或金属纳米结构上的分子与金属表面发生的等离子共振(SPR)相互作用而引起的拉曼散射增强现象,是一种高灵敏的探测界面特性和分子间相互作用的光谱手段。文章归纳总结了近年来常用的SERS衬底的制备方法(溶液中的金属溶胶(MNPs in suspension)、 金属纳米粒子的自组装(self-assembly)、 模板法(Template method)和纳米光刻法(Nanolithographic)等;综述了这些衬底的表面增强拉曼特性;着重介绍了SERS增强在环境监测和生物医学应用上的最新国内外研究动态。目前已经能够实现增强因子高、 可靠性好、 重现性强的SERS衬底的可控制备,表明SERS可以作为一种高性能的分析探测工具,充分实现其潜在应用价值。     

不同结构毛细管网辐射板供冷性能实验研究

对两种不同结构毛细管网辐射板的性能进行了实验研究,分析了在不同供水温度下,该两种辐射板在表面温度分布、供冷能力、安装辐射板房间温度变化情况之间的差异,为今后毛细管网辐射供冷空调系统辐射末端的设计应用及运行控制提供依据。     

中药柴胡中K、Ca、Zn、Fe和Mn含量测定及清除自由基机制分析

研究了柴胡中金属元素的作用为治疗呼吸系统疾病提供依据.选取柴胡粉碎、干燥至恒重,采用HNO3-HClO4湿法消化,用原子吸收分光光度计测定宏量元素钙、钾和微量元素铁、锰、锌的含量.测定结果表明,柴胡中含有丰富的金属元素.用原子吸收分光光度法测定中草药中金属元素含量,方便迅速.结果准确,测定结果为临床上合理利用柴胡清除自由基、预防和治疗呼吸系统疾病提供科学依据,也为大力开发、利用中药柴胡提供了有用的数据.