CeAgAs2 — a New Derivative of the HfCuSi2 Type of Structure: Synthesis,Crystal Structure and Magnetic Properties

Single crystals of CeAgAs₂ have been obtained by chemical transport reactions starting from a pre‐reacted powder sample. The crystal structure was solved using X‐ray diffraction (space group Pmca, No. 57, a = 5.7586(4) Å, b = 5.7852(4) Å, c = 21.066(3) Å, Z = 8) and refined to a residual of R(F) = 0.029 for 46 refined parameters and 1020 reflections. The structure of CeAgAs₂ represents a new distorted and ordered variant of the HfCuSi₂ type. The characteristic feature of this structure are infinite cis‐trans chains of As atoms with As—As distances of 2.563(1) Å and 2.601(1) Å. CeAgAs₂ is paramagnetic (μ_eff = 2.37 μ_B, θ = —10.5(2) K), with antiferromagnetic ordering at 5.5(2) K and exhibits a metamagnetic transition starting at 4.6 kOe and T = 1.8 K.     

Fabrication of high performance thin films from metal fluorocomplex aqueous solution by the liquid phase deposition

The hetro-structured oxide thin films from metal fluorocomplex solution have been prepared by the liquid phase deposition (LPD) method. The Pt/Nb₂O₅ and Au/Nb₂O₅ composite films can be prepared from a mixed solution of niobium source, H₃BO₃, Pt(NH₃)₄Cl₂ and HAuCl₄ aqueous solutions under the ambient temperature and atmosphere. In the case of Au/SiO₂ composite film, (NH₄)₂SiF₆ solution is used as a mother solution. The Pt and Au ionic species are deposited in Nb₂O₅ and SiO₂ matrices. They are reduced to their metallic state after treatment above 200 °C. The size of dispersed particles can be controlled by heat treatment temperature. It is also clear that, gold nanoparticles are also found to interact with SiO₂, although the interaction is smaller than that with Nb₂O₅ showing the size of Au nanoparticles remain smaller in Nb₂O₅ that in SiO₂.     

Synthesis of saccharidic polymer colloids via free radical mini‐emulsion polymerization

Polymer colloids based on 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and butyl acrylate (BA) were prepared via free radical mini‐emulsion polymerization. The kinetic and colloidal features of the copolymerization were investigated. The final particle size (D) of the sugar latexes is inversely proportional to the concentration of the anionic emulsifier (sodium dodecyl sulphate, SDS) and the non‐ionic one (alkyl polyglucoside, APG). It was also found that D is independent of the concentration of either the water‐soluble initiator (potassium persulfate, KPS), or the oil‐soluble initiator (2,2′‐azobisisobutyronitrile, AIBN). The rate of mini‐emulsion polymerization is lower in comparison with the conventional emulsion polymerization under the same conditions. The polymerization rate (R_p) and the total number of particles (N_p) are proportional to the 0.72th and 0.93th power of the SDS, and to the 1.40th and 2.22th of the APG concentration. Following reaction orders, 0.79/0.06 were obtained for R_p/N_p versus the concentration of KPS, and 0.22/?0.01 for AIBN, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

Nanostructural Approach to Proton Ordering in Gas Hydrate Cages

A nanostructural approach to analysis of proton ordering in gas hydrate cages has been worked out within the framework of the topological model of strong and weak H-bonds. The approach involves rejection of the periodic boundary conditions, decomposition of the H-bond net into spherical layers, and two-dimensional drawing of the structure of spherical (spheroidal) fragments in the form of conjugate Schlegel diagrams. To analyze proton ordering in the spherical fragments composed of gas hydrate voids, we used the simulated annealing procedure and the correlation extension method proposed earlier.     

Novel Fabrication of Conductive Polymers Contained Micro‐Array Gas Sensitive Films Using A Micromanipulation Method

A novel method for fabricating a micro gas sensor film on an indium tin oxide (ITO) electrode patterned using micro‐machining technology was developed. A micromanipulation system equipped with a counter electrode (Au; Ø10 μm) and a microsyringe, which was connected to a microinjection system, was first constructed. With this system, micro gas sensor arrays could be successfully prepared on ITO electrodes. Two kinds of micro gas sensor films were prepared, based on polythiophene (PTh) and poly(3‐n‐dodecylthiophene) (PD). The response behavior of conventional PTh and micro‐PTh films against NH₃ at three different operating temperatures (25, 40 and 60 °C) was investigated by measuring the resistance of the film. With the micro‐PTh film, a reversible response was observed against NH₃ when measured at 40 and 60 °C. In addition, the responsive characteristics of the microsensor films against different testing gases were examined at the three operating temperatures. The resistance of the microsensor films of PTh and PD changed considerably, depending on the type of testing gas, allowing these sensor films to be used for the detection of various gases. Furthermore, the microsensor films had a high stability compared with conventional films prepared from the same polymer.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Electric-field-driven deracemization.

We demonstrate, both theoretically and experimentally, that it is possible to use an electric field to drive the formation of macroscopic chiral (conglomerate) domains from an initially homogeneous fluid racemate. Field-induced segregation is exhibited in a fluid smectic liquid-crystal phase of a racemic mesogen, wherein enantiomerically-enriched domains are readily identifiable by their chiral electro-optical response. The sharp field-generated boundaries that form between opposite-handed domains broaden by diffusion in the absence of field, but reform rapidly if the field is switched on again, providing unambiguous evidence for the field-driven physical separation of enantiomers. A mean-field model successfully describes the steady-state and the dynamic evolution of conglomerate formation.     

Experimental and computational studies of intracomplex reactions in Mg+(primary, secondary alkylamine) complexes induced by photoexcitation of Mg+

We report herein a comprehensive study of photoinduced reactions in complexes of Mg+ with primary (n-propyl- and isopropylamine) and secondary amines (dipropyl- and diisopropylamine) in the spectral range of 230-440 nm. Similar to the methyl- and ethylamine complexes studied previously, N-H bond activation of these complexes is very unfavorable. Instead, the C(alpha)-C, C-N, and C(alpha)-H bond-cleavage photoproducts are observed after photoexcitation of the Mg+ complexes (3(2)P<--3(2)S). For Mg+(primary amine) complexes, for example, Mg+-NH2CH2CH2CH3, and Mg+-NH2CH(CH3)2, the photoproducts resulting from C(alpha)--C rupture prevail after P(z) and charge-transfer excitations, whereas the Mg+ photofragment is predominant upon P(x,y) excitation. However, with further N-alkyl substitution, as in Mg+(secondary amine) complexes, for example, Mg+-NH(CH2CH2CH3)2 and Mg+-NH[CH(CH3)2]2, a novel intracomplex C-C coupling photoreaction dominates on P(x,y) excitation of Mg+, which is believed to arise from Mg+* insertion into the C-N bond. With P(z) and charge-transfer excitation, the Mg-R elimination photoproducts, arising from C(alpha)-C bond cleavage, predominate. The energetics and possible mechanisms of the intracomplex photoreactions are analyzed in detail with the help of extensive quantum mechanics calculations.     

肾炎及肾衰患者血中金属元素含量的变化

用原子吸收法或极谱法测定了对例慢性肾炎病人（A组）和24例慢性肾衰病人(B组)及40名健康人（对照组，C组）全血中的Fe、Zn、Cu、Mn、Se、Pb和Ga含量。结果表明，A组与C组比较．血中Fe的含量A组明显低于C组（P＜0.05），Zn、Mn和Se的含量A组均非常明显低于C组（P＜0.01），Pb含量A组非常明显高于C组（P＜0．01），Cu和Ca含量两组间均无明显差异（P＞0.05）；B组与C组比较，Fe含量B组明显低于C组（P＜0.06），Se含量则B组明显高于C组（P＜0.05）；Zn、Mn、Cu、Ga含量B组均非常明显低于C组（P＜0.01），而Pb含量则B组非常明显高于C组（P＜0．01）。     

烷基锂分子中化学键的 ab initio 研究

本文用6-13G基函对3-12G基优化构型进行单点ab initio (从头计算法) 计算, 并根据轨道的组合系数、电荷密度图和键强参数等详尽地分析了烷基锂分子的成键情况。烷基锂的易挥发、易聚合、聚合物易溶于烃类溶剂中等物理、化学性质主要是其C－Li键具有显著的共价性缘故。由于烷基锂的C-Li键比C－H和C－C键的强度要小,故C-Li键易于断裂,使烷基锂表现有高的化学反应活性。