Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

介孔碳材料对蛋白质的吸附行为

用紫外分光光度法,找出介孔碳材料对蛋白质的最佳吸附条件,并测定出该介孔碳材料对溶菌酶的最大吸附量。主要从3方面研究介孔碳材料对蛋白质吸附行为的影响。分别是介孔碳材料对蛋白质吸附行为随接触时间的变化产生的影响,pH值的改变对介孔碳材料吸附蛋白质行为的影响,以及介孔碳材料的量的改变对蛋白质吸附行为随接触时间的变化产生的影响。结果表明,当溶菌酶溶液的初始浓度为210μm ol/L,pH值为11.0,接触时间为96h时介孔碳材料对蛋白质即可达到吸附饱和。该介孔碳材料在最佳条件下对溶菌酶的最大吸附量为27.32μm ol/g,表现出优越的溶菌酶吸附性能。     

Resonantly enhanced strip-line technique to measure microwave permeability of thin films

The sensitivity of a reflective single-port strip-line technique is increased by 10-20 times by amplification of a measured reflectivity response at a set of resonance frequencies. The resonant behavior is organized by connecting the strip cell to a network analyzer through a capacitor with a long coaxial cable. The capacitance defines the amplification; the cable length defines the resonance frequencies. S-parameters of the coaxial-to-strip junction and the field inhomogeneity inside the cell are accounted for by a reference measurement of sample with known constitutive parameters. Two methods for permeability calculation are suggested. The fist method is based on the comparison of Lorentzian parameters of resonance reflectivity curves. The second method is based on numerical solution of Fresnel's equation. The enhancement is essential at low-frequency part of the band, where the cell reflectivity is close to unity and the sensitivity of non-resonant technique is poor. The technique sensitivity is estimated by permeability measurements of Al stripes with different cross-section.     

Theoretical study of the temperature dependence of the width of magnetic domain walls

The temperature dependence of magnetic domain walls in ferromagnetic systems with strong exchange coupling and weak lattice anisotropy is studied assuming that the thermal influence results mainly from the temperature dependence of the magnetization. We obtain that in lattices with an uniaxial symmetry like Co the wall width increases with temperature, but stays finite up to the Curie temperature T_c. In contrary, for a cubic lattice like Fe the wall width diverges for T → T_c, if only the lattice anisotropy is taken into account. The shape of the domain walls is not conserved, since at T_c the wall is determined only by the lowest order of anisotropy. In addition, the temperature dependence of a domain wall width for a thin magnetic film is determined. Using a special symmetry, we obtain a diverging wall width at a temperature markedly lower than T_c. However, the consideration of additional domain wall modes should modify this result.     

Exchange bias in (1 1 0)-orientated Bi0.9La0.1FeO3/La0.5Ca0.5MnO3 films

We performed a systematic study on the exchange bias in (1 1 0)-orientated Bi_0.9La_0.1FeO₃/La_0.5Ca_0.5MnO₃ (BLFO/LCMO) heterostructure with a fixed BLFO film thickness of 600 nm and different LCMO layers ranging from t=0 to 30 nm. The LCMO is found to be weakly ferromagnetic, with the Curie temperature descending from ∼225 K to 0 as the layer thickness decreases from 30 nm to 3 nm. The main magnetic contributions come from the BLFO film, and the areal magnetization ratio is 1:0.07 for t=5 nm and 1:0.82 for t=30 nm for BLFO to LCMO at the temperature of 5 K. Further experiments show the presence of significant exchange bias, and it is, at the temperature of 10 K, ∼40 Oe for t=0 and ∼260 Oe for t=30 nm. The exchange bias reduces dramatically upon warming and disappears above the blocking temperature of the spin-glasslike behavior observed in the samples. The possible origin for exchange bias is discussed.     

Temperature dependence of the Raman spectra of Bi2Te3 and Bi0.5Sb1.5Te3 thermoelectric films

The temperature dependence of the Raman spectra of Bi₂Te₃ and Bi_0.5Sb_1.5Te₃ thermoelectric films was investigated. The temperature coefficients of the E_g(2) peak positions were determined as –0.0137 cm^–1/°C and –0.0156 cm^–1/°C, respectively. The thermal expansion of the crystal caused a linear shift of the Raman peak induced by the temperature change. Based on the linear relation, a reliable and noninvasive micro‐Raman scattering method was shown to measure the thermal conductivity of the thermoelectric films. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

高温超导滤波器两种刻蚀方法的研究

在高温超导滤波器的制备过程中,针对所使用的高温超导薄膜的特点,采用了两种刻蚀方法——湿化学刻蚀法和离子束刻蚀法,设计对比了两种刻蚀的制作流程及其优缺点,并用两种方法分别制备了高温超导滤波器,对微波特性做了对比分析。得出离子束刻蚀对超导薄膜的性能影响要小一些,用此方法制备的高温超导滤波器具有更好的微波特性。     

膜系光谱系数对膜层参数的一阶和二阶偏导数的计算模型

为了寻找一种膜系深入分析与设计的有力辅助计算工具,从光学薄膜光谱系数的矩阵计算理论出发,基于对矩阵求迹运算的巧妙运用,从数学上建立了准确计算膜系光谱系数关于膜层几何厚度、实际折射率和消光系数等膜层参数的一阶和二阶偏导数的解析模型。这一偏导数计算模型物理上与矩阵理论具有一致的通用性和普适性,适用于任何各向同性的均匀膜系统。在数学上也严格成立,数值编程计算不存在差分近似,精度达到了计算机浮点运算的极限精度。而且算法运算费时少,计算速度快,取得了高度准确性和便于实时化的双重优越性能,非常有利于应用于膜系设计领域来提高膜层数较大时的设计速度和效率。同时,这一模型能非常便捷和准确地给出膜系许多实用的导数信息,对膜系分析、测量和膜厚监控等领域中的相关应用具有重要的参考意义。     

Many-electron effect in the Fe L3-M4,5M4,5 Auger electron spectrum of ultrathin Fe films grown on Cu(1 0 0)

D’Addato et al. [S. D’Addato, P. Luches, R. Gotter, L. Floreano, D. Cvetko, A. Morgante, A. Newton, D. Martin, P. Unsworth, P. Weightman, Surf. Rev. Lett. 9 (2002) 709] studied the variation with Fe coverages in the relative Fe L₃-M_4,5M_4,5 Auger electron spectroscopy (AES) spectral satellite intensity of ultrathin Fe films grown on Cu(1 0 0) by sweeping photon excitation energy through the Fe L₂-level ionization threshold. They interpreted that the M_4,5 hole in the L₃M_4,5 double-hole state created by the L₂-L₃M_4,5 Coster–Kronig (CK) decay remains localized for longer than the L₃-hole lifetime for the 0.3 and 10 ML coverages but has a lifetime comparable to the L₃-hole lifetime for the 1 ML coverages. The present many-body theory shows that when the M_4,5 hole created either by the CK decay or by the L₃M_4,5 shakeoff hops away from the ionized atomic site and becomes completely screened out prior to the L₃-hole decay, the Fe L₂-L₃M_4,5-L₃-M_4,5M_4,5 AES main line as well as the Fe L₃ M_4,5 (satellite)-L₃-M_4,5M_4,5 one, both of which are identical in line shape to the Fe L₃-M_4,5M_4,5 one, dominate in the Fe CK preceded AES spectrum. The present analysis shows that the delocalization time of the M_4,5 hole created in the 1 ML Fe/Cu(1 0 0) system by the L₂-L₃M_4,5 CK decay is much shorter than the L₃-hole lifetime so that the Fe L₃-M_4,5M_4,5 AES spectral line shape hardly changes, except for the presence of a very weak spectator L₂-L₃M_4,5-M_4,5M_4,5M_4,5 AES satellite, when the photon excitation energy is swept through the Fe L₂-level ionization threshold. For the 0.3 ML coverages the M_4,5-hole delocalization time is still shorter than the L₃-hole lifetime.     

Growth and electronic properties of ultra-thin Ag films on Ni(1 1 1)

We studied the growth mode and electronic properties of ultra-thin silver films deposited on Ni(1 1 1) surface by means of scanning tunnelling microscopy (STM) and angle resolved photoemission spectroscopy (ARPES). The formation of the 4d-quantum well states (QWS) was analysed within the phase accumulation model (PAM). The electronic structure of the 1 ML film is consistent with the silver layer which very weakly interacts with the supporting surface. The line-shape analysis of Ag-4d_xz,yz QWS spectrum support the notion of strong localization of these states within the silver layer. The asymmetry of the photoemission peaks implies that the decay of the photo-hole appears to be influenced by the dynamics of the electrons in the supporting surface.