Electrochemical grafting by reduction of 4-aminoethylbenzenediazonium salt: Application to the immobilization of (bio)molecules

We propose in this study a simple and rapid way to produce stable amino-derivatized conductive surfaces for the subsequent immobilization of (bio)molecules. This was achieved through the use of (4-aminoethyl)benzenediazonium salt (AEBD), which was immobilized on glassy carbon and gold electrodes by its electrochemical reduction. The presence of terminal grafted amino functions was evidenced with XPS by analyzing N1s core level. Besides this conventional surface characterisation, an electrochemical strategy is proposed here to evidence the presence of immobilized amines, in which the chemical reactivity of amines towards 2,4,6-trinitrobenzenesulfonic acid (TNBS) is used. Surface-bound TNBS served as an electrochemical marker and was detected by cyclic voltammetry. Additionally, pre-modified gold electrodes with amino functions can be derivatized with biomolecules such as glutathione (GSH). Glutathione attachment was evidenced by studying the electrochemical behaviour of ferri/ferrocyanide redox before and after its immobilization. The functionalized electrodes were then used for the detection of copper ions in neutral aqueous solutions.     

水热改性对NiMo/γ-Al2O3加氢脱氮催化剂结构及性能的影响

The influence of hydrothermal modification on the structure and hydrodenitrogenation (HDN) activity of NiMo/γ-Al₂O₃catalyst was studied in the range 140～180 ℃. The experimental results indicated that the hydrodenitrogenation reaction rate of pyridine was accelerated using the NiMo/γ-Al₂O₃catalyst synthesized via hydrothermal route due to the change of the structure, the increase of the amount of Mo and Ni and the rise of the specific surface area. The change of the structure of catalysts was enhanced at higher hydrothermal temperature, producing NiMo/γ-Al₂O₃catalyst with better HDN activity.     

Chemical modification of polymer surfaces: a review

The main approaches that have been taken to chemically modify polymer surfaces are introduced and reviewed. These are wet chemical oxidation, plasma treatment, classical organic chemistry, and attachment of polymer chains. The extent to which each of these approaches can produce the specific modifications desired is discussed, and any unwanted effects that commonly occur are cited. Finally, the need for using several methods of surface analysis in concert to obtain adequate surface characterization is described.     

纳米SiO_2颗粒表面修饰的有机分子在介质中的光物理行为研究

利用Sol-Gel方法投篮了单分散性很好的球型二氧化硅纳米颗粒，通过表面化 学修饰法引入了带有荧光发色团的有机分子，通过稳态光物理方法研究了纳米颗粒 表面的有机分子在水、乙醇以及阴、阳离子表面活性剂悬浮液中的光物理行为。实 验表明，纳米颗粒表面有机分子的分散状态是决定其光物理行为的主要因素。这一 结果为设计和开发新型“壳-核”型纳米二氧化硅荧光传感器提供了有用的参考。     

Site-specific modification of the 5"-terminal fragment of PGY1/MDR1 gene mRNA by reactive conjugates of antisense oligonucleotides

The site-specific modification of the 5"-terminal fragment of PGY1/MDR1 mRNA by oligodeoxyribonucleotide conjugates bearing residues of bleomycin A₅ (Blm), cobalt(ii) tetracarboxyphthalocyanine (Phcn), 4-[N-(2-chloroethyl)-N-methylamino]benzylamine (RCl), or perfluoroarylazide (Az) was studied. Conjugates of oligonucleotides complementary to the RNA sequences 123—138 and 155—166 selectively modify RNA in the vicinity of these regions. The highest efficacy (up to 50%) was achieved in reactions with alkylating and perfluoroarylazide conjugates of oligonucleotides. Conjugates of perfluoroarylazide with 2"-O-modified oligonucleotides are much more efficient than analogous conjugates with oligodeoxyribonucleotides (extents of RNA modification are 40—50% and 20%, respectively).     

磷酸三乙酯改性HZSM-5沸石的活性及理论研究

采用XRD表征了水蒸气和磷联合改性的HZSM-5沸石分子筛的结构．通过NH3-TPD和N2吸附脱附研究了样品的酸性和比表面．采用正庚烷的裂化反应研究了样品的裂化活性，研究结果表明，磷改性样品与母体样品相比，经过水蒸气处理后显示出较高的酸量和正庚烷裂化活性．上述结果首次用模型簇和计算量子化学方法进行了解释．采用Gaussian94软件包和PM3半经验量子化学方法对模型簇进行了全优化和频率分析．计算结果显示磷改性后样品的脱铝补硅反应热大于母体样品脱铝补硅反应热，从而显示出磷对骨架的稳定化作用．     

炭气凝胶及其有机气凝胶前驱体的研究进展

介绍了炭气凝胶及其有机气凝胶前驱体的发展概况，着重总结了制备工艺条件(如催化剂及其浓度、反应物总浓度、反应物配比、溶剂、反应温度及时间、超临界干燥工艺条件和炭化工艺条件等)对有机气凝胶及其相应炭气凝胶中孔网络结构的影响，综述了中孔网络结构改性研究的进展．     

A study of carboxylic-modified mesoporous silica in controlled delivery for drug famotidine

A series of pure silica MSU and carboxylic-modified MSU materials were prepared. The formation of mesoporous silica materials with terminal carboxylic groups on pore surface was performed by the acid-catalyzed hydrolysis of cyano to carboxylic. Then their potential applications in controlled drug delivery carriers were investigated. Drug famotidine was selected as a model molecule out of the consideration of the terminal amino groups in its molecule. The adsorption experiments show significant adsorption of famotidine on the carboxylic-modified MSU materials. And, the functionalization level of carboxylic groups has been found to be the key factor affecting the adsorption capacities of the modified MSU materials for famotidine. Subsequently, three kinds of release fluids, including simulated gastric medium, simulated intestinal medium, and simulated body fluid, were used to test the famotidine release rate from the carboxylic-modified MSU material. Obvious delayed effect has been observed for the famotidine release from the carboxylic-modified mesoporous silica material under the in vitro assays.     

基于离子液体的炭材料制备、改性及应用

离子液体因其熔点低、液态温域宽、蒸气压低、热稳定性高、电导率高、电化学窗口宽、结构可设计及对许多化合物的亲和性等系列性能而引起人们广泛关注。离子液体在炭材料制备、改性领域展示出了良好的前景及巨大的应用潜力,可直接作为碳源,经过高温炭化实现杂原子掺杂制备多孔炭材料;离子液体也可充当反应介质和致孔剂,将生物质转化为多孔炭材料;此外,由于离子液体与炭材料相容性较好,可以用于多孔炭材料改性制备炭复合材料。基于离子液体的炭材料在电催化、超级电容器、吸附分离及生物医学等领域具有潜在的应用价值。本文总结了基于离子液体炭材料的制备、改性及应用最新研究进展,并着重介绍了其在能源和环境相关领域的应用。     

铝镧修饰MCM-41介孔分子筛的合成、表征及在乙氧基化反应中的催化性能

以十六烷基三甲基溴化铵(CTAB)为模板剂,正硅酸乙酯(TEOS)为硅源,乙二胺为碱性介质,水热法合成了硅铝、硅镧及硅(铝 镧)摩尔比为30的Al-MCM-41、La-MCM-41和Al-La-MCM-41介孔分子筛,通过XRD、IR、NH3-TPD吸附脱附、BET、热分析及CCl4吸附等方法对分子筛的晶体结构和表面物性进行了研究,XRD及BET研究结果表明,所合成的分子筛具有典型的六方介孔结构特征及较大的比表面积.NH3-TPD结果表明所合成的介孔分子筛均达到中强酸酸度.将Al-MCM-41、La-MCM-41和Al-La-MCM-41分别用于催化乙氧基化反应,研究结果表明Al-La-MCM-41具有更高的催化活性,Al-La-MCM-41为正辛醇质量的5%,反应温度为120℃,反应压力0.2MPa,n(醇)∶n(环氧乙烷)=1∶3时,正辛醇聚氧乙烯醚产品的收率达92%.