超高效液相色谱-三重四极杆质谱法测定血浆和尿液中马桑亭和马桑宁

建立了超高效液相色谱-三重四极杆质谱联用技术测定血浆和尿液中马桑中毒标志物马桑亭和马桑宁的方法。血浆和尿液样品经固相支持液液萃取法提取净化后，溶于15%（v/v）甲醇水溶液中，以Cortecs C₁₈色谱柱（100 mm×2.1 mm，1.6 μm）作为分析柱进行分离，电喷雾负离子多反应监测（MRM）模式下检测，以氟苯尼考作为内标物，基质工作曲线内标法定量。血浆和尿液中马桑亭和马桑宁的平均加标回收率为86.2%~110%，相对标准偏差为5.1%~14.6%（n=6），血浆中马桑亭和马桑宁的检出限（S/N=3）分别为0.01 μg/L和0.1 μg/L，尿液中马桑亭和马桑宁的检出限分别为0.03 μg/L和0.3 μg/L。本法简单、灵敏、准确，可用于血浆和尿液中马桑亭和马桑宁的中毒检测。     

全自动QuEChERS样品制备系统结合高效液相色谱-串联质谱法检测植物源性食品中34种农药残留

建立了全自动QuEChERS样品制备系统结合高效液相色谱-串联质谱（HPLC-MS/MS）同时检测植物源性食品中34种农药残留的分析方法。方法利用全自动QuEChERS样品制备系统涡旋振动和离心功能，将手动QuEChERS方法中样品提取和分散固相萃取相结合；优化了操作参数及前处理步骤，在多反应监测（MRM）模式下检测，基质匹配外标法定量。从方法学验证角度对全自动QuEChERS法与手动QuEChERS法进行了比较。结果表明：该方法中大多数农药在一定范围内呈现良好的线性关系，相关系数（R²）均大于0.99，检出限为0.76~3.60 μg/kg，定量限为2.28~10.80 μg/kg，加标回收率为53.0%~125.2%，相对标准偏差（RSD）<15.9%（n=5）。该方法与手动QuEChERS法的方法验证比对结果显示差异不明显，用于植物源性食品中多农药残留检测可有效降低劳动强度和出错概率。     

An in situ STM study on the long-range surface restructuring of Au(1 1 1) in a non-chloroaluminumated ionic liquid

We report an in situ STM study of a potential-dependent long-range surface restructuring of Au(1 1 1) electrode in neat 1-butyl-3-methylimidazolium tetrafluoroborates (BMIBF₄) ionic liquid. Au(1 1 1) undergoes a significant long-range surface restructuring upon cathodic excursion to −1.0 V vs. Pt quasi-reference. The restructuring involves the formation of tiny pits, which then develops into a stable worm-like network with an average width of the network grids 2 nm. Electrochemical annealing occurs at the cathodic limit with the presence of a reduction product of cation BMI⁺. A smooth surface is recovered with the appearance of the typical (√3 × 22) reconstruction of Au(1 1 1). The surface restructuring is reestablished upon anodic excursion to −1.3 V after the adsorbed reduction product is oxidized. The long-range surface restructuring phenomenon is tentatively explained as a result of partial charge transfer to the weakly adsorbed BMI⁺, which reduces the metal–metal cohesive energy. In addition, the synergetic effect of the counter anion BF₄⁻ may also be involved. The results provide a knowledge of Au(1 1 1) electrode behavior in the neat ionic liquid and are beneficial to understanding in situ STM results involving surface morphological changes in such a media.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA)

Benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) is introduced as a monomer for the synthesis of a series of novel polyimides with enhanced high thermal stability. Polyimides derived from BBTDA and aromatic diamines showed high glass transition (T_g>296 °C) and degradation (T₅>455 °C) temperatures, and were soluble in organic solvents (i.e. N-methyl pyrrolidone (NMP), N,N^′-dimethylformamide (DMF), N,N^′-dimethylacetamide (DMAc)). The polymerization yielded high-molecular-weight polyimides with inherent viscosities ranging from 1.75 to 2.14 dl/g. The polymers were characterized by IR and elemental analysis.     

A Novel Octahedral Hexasilver(I) Cluster: Ag_6[SSCN(n-C_4H_9)_2]_6

ＣｏｍｐｏｕｎｄｓｆｏｒｍｅｄｆｒｏｍＣｕ ,ＡｇａｎｄＡｕｗｉｔｈｄｉｔｈｉｏ ｌａｔｅｌｉｇａｎｄｓ ,ｓｕｃｈａｓｔｈｅｄｉａｌｋｙｌｄｉｔｈｉｏｃａｒｂａｍａｔｅ (ＤＴＣ) ,ｍｅｒｃａｐｔｏｔｈｉａｚｏｌｉｎｅ (ＨＭＴ)ａｎｄｄｉａｌｋｙｌｄｉｔｈｉｏｐｈｏｓｐｈａｔｅｓ(ＤＤＰ) ,ｈａｖｅｐｌａｙｅｄａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｔｅｃｈｎｏｌｏｇｙ .1Ｃｕ(Ｉ) Ｓｃｌｕｓｔｅｒｓａｌｓｏｈａｖｅｂｅｅｎｉｍｐｌｉｃａｔｅｄｉｎｂｉｏｌｏｇｙａｓａｎ ｔｉ ｏｘｉｄａｎｔｓ .2Ｔｈｅｃｕｂａｎ…     

Perfluorinated anion-exchange polymer mercury film electrode for anodic stripping voltammetric determination of zinc(II): effect of model organic compounds

The determination of zinc ion (1-60 ng ml⁻¹) by anodic square-wave stripping voltammetry on an anion-exchange perfluorinated polymer Tosflex mercury film electrodes (TMFE) was evaluated. The detection limit was 0.1 ng ml⁻¹ Zn(II). The effect of various organic compounds (gelatin, albumin, starch, camphor, humic acid, Triton X-100, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)) is explored. The results indicate that due to the size-exclusion and ion-exchange properties of Tosflex film, the TMFE is considerably more resistant to organic interference than the bare mercury film electrode.     

Dynamik linearer Molekülanionen in den Hydrogensulfiden von Natrium,Kalium und Rubidium: Differential-Scanning-Kalorimetrie,Röntgen- und Neutronenbeugung

Dynamical Behaviour of Linear Molecular Anions in the Hydrogensulfides of Sodium, Potassium and Rubidium: Differential Scanning Calorimetry, X-ray and Neutron Diffraction Hydrogensulfides of the alkali metals M ? Na, K, Rb were prepared in autoclaves by the reaction of the corresponding metals with H₂S and D₂S, respectively, in the temperature range from 50°C to 150°C. Differential scanning calorimetry, X-ray and neutron diffraction methods reveal that both, the HS^?-and DS^?-compounds occur in three crystalline modifications with HT ? high-, MT ? medium- and LT ? low-temperature form: The temperatures and enthalpies for the changes of modifications of the H- and D-compounds are given and the atomic arrangements revealed mainly by neutron diffraction data are discussed, in relation to, for example, size of cations.     

Eine neue Hochtemperaturform von TiO: H?TiO

A New High Temperature Form of TiO: H? TiO Single crystals of a high temperature form of TiO (H? TiO) were prepared above 3 000°C by CO₂-LASER technique. They crystallize with a hitherto unobserved crystal structure of oxides with titanium in the oxidation state two, isotypic to tungsten carbide with Ti²⁺ in a trigonal prismatic surrounding by oxygen. Space group D–P6 m2, a = 3.0310, c = 3.2377 Å, Z = 1.