Stripping Voltammetry of Mercury(II) with a Chemically Modified Carbon Paste Electrode Containing Silica Gel Functionalized with 2,5‐Dimercapto‐1,3,4‐thiadiazole

The accumulation voltammetry of mercury(II) was investigated at a carbon paste electrode chemically modified with silica gel functionalized with 2,5‐dimercapto‐1,3,4‐thiadiazole (DTTPSG‐CPE). The repetitive cyclic voltammogram of mercury(II) solution in the potential range ?0.2 to +0.8 V (vs. Ag/AgCl), (0.02 mol L^?1 KNO₃ ; v=20 mV s^?1) show two peaks one at about 0.0 V and other at 0.31 V. However, the cathodic wave peak, around 0.0 V, is irregular and changes its form in each cycle. This peak at about 0.0 V is the reduction current for mercury(II) accumulated in the DTTPSG‐CPE. The anodic wave peak at 0.31 V is well‐defined and does not change during the cycles. The resultant material was characterized by cyclic and differential pulse anodic stripping voltammetry performed with the electrode in differents supporting electrolytes. The mercury response was evaluated with respect to pH, electrode composition, preconcentration time, mercury concentration, “cleaning” solution, possible interferences and other variables. The precision for six determinations (n=6) of 0.05 and 0.20 mg L^?1 Hg(II) was 2.8 and 2.2% (relative standard deviation), respectively. The method was satisfactory and used to determine the concentration of mercury(II) in natural waters contaminated by this metal.     

[Hg2(μ‐bpe)(μ‐OAc)2(μ‐SCN)2]n,a New Two‐Dimensional Coordination Polymer Involving Three Simultaneously Bridging Ligands: 1,2‐Bis(4‐pyridyle)ethene,Acetate, and Thiocyanate

A new mercury(II) complex of 1,2‐bis(4‐pyridyle)ethene (bpe) with anionic acetate and thiocyanate ligands has been synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. The single crystal X‐ray analysis shows that the complex is a two‐dimensional polymer with simultaneously bridging 1,2‐bis(4‐pyridyle)ethane, acetate and thiocyanate ligands and basic repeating dimeric [Hg₂(μ‐bpe)(μ‐OAc)₂(μ‐SCN)₂] units. The two‐dimensional system forms a three‐dimensional network by packing via π‐π stacking interactions.     

Elimination of SAS Interferences in Catalytic Adsorptive Stripping Voltammetric Determination of Cr(VI) by Means of Fumed Silica

In the work the procedure of chromium(VI) determination by catalytic adsorptive stripping voltammetry (CAdSV) with application of fumed silica, is presented. Two variants of the method are proposed: in the first fumed silica is put directly to the electrolytic cell containing tested solution, in the second the silica is shaken with the sample and next centrifuged. The effectiveness of many surface‐active substances removal from synthetic solutions as well as natural water samples, is studied. In the experiments the fumed silica (Sigma‐Aldrich) of the specific surface area in the range 200–390 m² g^?1 was used. Two types of the working electrodes were applied, i.e., hanging mercury drop electrode (HMDE) and cyclic renewable mercury film electrode (Hg(Ag)FE). In the silica presence i) the relative standard deviation (RSD) for 0.1 μg L^?1 Cr(VI) is <2% (HMDE) and <5% (Hg(Ag)FE), n=7, ii) the detection limits estimated deposition time 20 s were respectively 14 ng L^?1 (HMDE) and 22 ng L^?1 (Hg(Ag)FE). The accuracy of the method was tested by studying the recovery of Cr(VI) from spiked natural water samples.     

Effect of Copper on Solid Electrolytes (Ce0.8Sm0.2)1 ? xCuxO2 ? δ and Composite Cathodes Based on La0.8Sr0.2MnO3

The phase composition and electroconduction in air of solid electrolytes (Ce_0.8Sm_0.2)_{1 − x} Cu_xO_{2 − δ} (CSCu), where x = 0, 2, 5, 10, and 20 mol % and which are synthesized using the ceramic technology, are studied. Adding an additive of CuO lowers the CSCu sintering temperature by 100– 200°C and leads to the formation of single-phase solid solutions of a fluorite type up to x = 10 mol %. The electroconductivity of the CSCu electrolytes remains practically invariant upon adding up to 5 mol % Cu and equals 0.089–0.095 and 0.017–0.021 S cm⁻¹ at 800 and 600°C. The sintering, adhesion, and electroconductance of composite cathodes based on La_0.8Sr_0.2MnO₃ with 40% CSCu and their electrochemical behavior in air in the temperature interval 900–1000°C on carrying electrolyte Zr^0.9Y_0.1O_1.95 with a CSCu sublayer containing 2 mol % Cu are studied.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 656–661.Original Russian Text Copyright © 2005 by Bogdanovich, Gorelov, Balakireva, Dem’yanenko.     

Sampling procedure and a radio-indicator study of mercury determination in whole blood by using an AMA 254 atomic absorption spectrometer

A sampling procedure appropriate for the determination of mercury in whole blood was tested by using both inactive controls and a ¹⁹⁷Hg mercury radio-indicator. To exclude the influence of the instrumental device (an AMA 254 single-purpose mercury atomic absorption spectrometer) on the determination of mercury in whole blood, the function of the instrument was checked by using rat blood with metabolised ¹⁹⁷Hg. The measurement procedure was found to be free of errors. However, the study showed that the material used for the sampling vessels is a crucial parameter for obtaining accurate analytical results. The stability of solutions and samples was tested towards polyethylene (PE) and polypropylene (PP) vessels. PE displayed a time-dependent increase in the mercury content both in the samples and in the blood control material. The probable cause of this increase was direct contamination from the material of the vessel and/or diffusion of mercury from the environment through the vessel walls related to a strong complexing affinity of the sample matrix. This assumption was confirmed by supplying the vessels with the complexing agent Na₂EDTA (0.05 mol L^–1). Commercial PP vessels for blood sampling (Sarstedt S-Monovette Metall Analytik) did not give rise to statistically significant variations in mercury content in the samples and blood control material over a 30-day period.     

Über Münzmetall‐Quecksilber‐Chalkogenidhalogenide. IV1) Hydrothermalsynthese und Kristallstruktur von CuHgSI und CuHg2S2I

On Coinage Metal Mercury Chalcogenide Halides. IV Hydrothermal Synthesis and Crystal Structure of CuHgSI and CuHg₂S₂I The hydrothermal reaction of CuI with α‐HgS in diluted aqueous HI‐solution as solvent at 180 °C yields dark red crystals of CuHgSI. The compound crystallizes orthorhombic in the space group Pna2₁ with a = 718.3(1) pm, b = 834.3(2) pm and c = 698.9(1) pm and Z = 4. CuHg₂S₂I was obtained by the hydrothermal reaction of CuI with α‐HgS in diluted HI‐solution at 300 °C as black crystals. The compound crystallizes orthorhombic in the space group Cmc2₁ with a = 1261.8(3) pm, b = 722.4(1) pm and c = 693.7(1) pm and Z = 4. Both crystal structures could be explained as distorted version of the Wurtzite structure type in which two different types of anion‐lattices are built up.     

The temperature-composition phase diagram of the HgTe?HgI2 pseudobinary system on the HgTe rich side

The temperature-composition phase diagram of the HgTe? HgI₂ system was determined from 0 to 45 Mol-% HgI₂ between 25 and 670°C using Debye-Scherrer powder X-ray diffraction techniques and differential thermal analysis. Solid solutions of HgTe and HgI₂ with the cubic, zinc blende-type structure exist above 300°C, having a maximum solubility of 11.7 ± 0.8 Mol-% HgI₂ in HgTe at 501 ± 5°C. The known monoclinic compound Hg₃Te₂I₂ is formed by a peritectic reaction upon cooling at 501 ± 5°C, with the peritectic point at approximately 37 ± 4 Mol-% HgI₂.     

氢化物发生-原子荧光光谱法测定水中汞的测量不确定度分析

对氢化物发生-原子荧光光谱法测定水中汞的分析方法的测量不确定度进行了估计。认为在分析的全过程中,标准溶液的配制、校准曲线的绘制以及试样的分析是测量不确定度的三项主要来源。基于这一认识,建立了相应的数学模型,对关系式中的各个变量作了分析并对其不确定度进行量化。最后,按统计学的计算方法给出了合成不确定度和扩展不确定度。     

Surface-assembled highly flexible Na_3(VOPO_4)_2F nanocube cathode for high-rate binder-free Na-ion batteries

Flexible Na-ion storage cathodes are still very few due to the challenge in achieving both reliable mechanical flexibility and excellent electrochemical performances.Herein,a new type of flexible Na_3(VOPO_4)_2F cathode with nanocubes tightly assembled on carbon cloth is fabricated by a facile solvothe rmal method for the first time.The cathode is able to exhibit superior rate capability and stable cycling performa nce up to 1000 cycles,due to the surface-assembling of crystalline nanocubes on carbon fibers.In addition,it shows good mechanical flexibility,nearly no capacity decay is observed after continuous bending of 500 times.With this novel cathode and a directly-grown Na_2Ti_2O_5 anode,a fully binde r-free Na-ion battery is assembled.It can deliver a high wo rking voltage and increased gravimetric energy/power densities(maximum values:220.2 Wh/kg;5674,7 W/kg),and can power a LED indicator at bending angles fro m 0° to 180°.     

大孔高镍LiNi0.8Co0.1Mn0.1O2正极材料的制备及其电化学性能研究

本工作以聚甲基丙烯酸甲酯(PMMA)微球组装成的胶晶模板作为铸模,溶胶-凝胶法辅助获得大孔LiNi0.8Co0.1Mn0.1O2 (NCM811)正极材料.结果 表明,利用PMMA作为造孔剂,形成了由100nm的颗粒堆积而成的大孔结构,这种结构有效地提高了材料的倍率性能和循环稳定性.大孔NCM811在0.1C的首次放电...