MORPHOLOGIES AND GAS SEPARATION PROPERTIES OF MELT-SPUN ASYMMETRIC POLY(4-METHYL-1-PENTENE)HOLLOW FIBER MEMBRANES*

Poly(4-methyl-1-pentene) (PMP) hollow fiber membranes were prepared by the melt-spun and cold-stretch(MSCS) method. Scanning electronic microscopy (SEM) was used to characterize the section and surface structures of themembranes with special asymmetric structure. The preliminary results of gas permeation measurements indicated that the resultant hollow fiber membranes have the potential ability for oxygen/nitrogen separation.     

GAS TRANSPORT PROPERTIES OF A POLYIMIDE BASED ON 2, 2-BIS (3, 4-DECARBOXYPHENYL) HEXAFLUOROPROPANE AND meta-PHENYLENEDIAMINE

By means of a vacuum time-lag method, gas transport properties of apolyimide based on 2, 2- bis (3, 4- decarboxyphenyl ) hexafluoropropane dianhydride (6FDA )and meta- phenylenediamine (mPDA ) have been measured as a function of upstream pres-sure and temperature. The results show that no gas-induced plasticization occurs for thispolyimide in the upstream pressure range from 1 atm to 20atm. The temperature depen-dence of P and D can be described by the Arrhenius equations. The activation energiesof permeation and diffusion were obtained for the gas/polymer pair studied and correlatedwith the size of penetrant gas.     

Biotinylation: A nonradioactive method for the identification of cell surface antigens in immunoprecipitates

A nonradioactive method was employed to detect different cell membrane antigens on human polymorphonuclear granulocytes, monocytes and platelets. We compared the reactivity of one monoclonal antibody, N1III10, assumed to be FcγRII-specific by functional assays, with other well-characterized monoclonal antibodies and human sera. Intact cells were incubated with biotin N-hydroxysulfosuccinimide ester which preferentially reacts with lysine residues in polypeptides. Biotin-labeled cells were lysed and the antigen was isolated from the cell lysate by immunoprecipitation with the antibody bound to Protein A-Sepharose. The precipitates were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, transferred onto nitrocellulose membrane, and visualized by a streptavidin-alkaline phosphatase system with a suitable substrate. Using this biotin-labeling system we could show that N1III10 detects a 40 kDa antigen on monocytes and platelets, comparable to that expected of FcγRII monoclonal antibodies.     

A membrane separation technique for optimizing sample preparation of MALDI-TOF MS detection

Here, we report a new method based on the combination of membrane separation technology and nanomaterial to rapid detection of peptides and protein with MALDI-TOF MS. This method shows advantages as it can inhibit the heterogeneous of sample spot and enhance the target molecular signal intensity.     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

Coating and water permeation properties of SiO2 thin films prepared by the sol-gel method on nylon-6 substrates

Nylon-6 substrates were coated with SiO₂ thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films on the substrates. The thin films strongly adhered to the substrates. The water permeability coefficients of nylon-6 substrates coated with these thin films decreased with the increase in the ratio of TEOS to the total alkoxides. The pretreatment of the nylon-6 substrates with -aminopropyltriethoxysilane was found to be effective to suppress the water permeability. The water permeability was suppressed by about 40% under the optimal condition.     

New breathable and waterproof coatings for textiles: effect of an aliphatic polyurethane on the formation of PEEK-WC porous membranes

PEEK-WC is an amorphous polyetheretherketone with high chemical stability, excellent thermal resistance and significant solubility in various solvents. It has been used to prepare flat membranes by the phase inversion technique. The water vapour permeability through a porous PEEK-WC film was 1350 g/m² day at 26 °C and its liquid entry pressure (LEP) of water equivalent to a column of 2.0 m. These values were remarkably improved by addition of an aliphatic ether polyurethane (PU) into the PEEK-WC/DMF dopes: the water vapour flux was increased up to 2000 g/m² day and the LEP was equivalent to 12.5 m. This improvement is correlated to the different structure of the membranes: a spongy, porous and almost symmetric structure for the PEEK-WC/PU membranes, and an asymmetric structure with fingers for PEEK-WC membrane. The presence of PU influences also the mechanical properties of the blend membranes. The role of the PU on the resulting membrane morphology is rationalised on the basis of the mechanism of phase separation.     

联苯二酐型聚酰亚胺的透气性能与分子结构关系的研究

联苯二酐型聚酰亚胺的透气性能与分子结构关系的研究李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚酰亚胺，膜，气体分离，透气性，透气选择性联苯二酐（ＢＰＤＡ）型聚酰亚胺具有较高的透气选...     

Modification of polysulfone membranes 4. Ammonia plasma treatment

The effect of NH₃ and NH₃/Ar plasma on ultrafiltration polysulfone membranes have been studied. Results of contact angle, FTIR-ATR and X-ray photoelectron spectroscopy experiments clearly showed that both plasmas introduced hydrophilic, nitrogen- and oxygen-containing moieties on the polymer surface and that NH₃/Ar plasma was more efficient. That plasma was also more aggressive--signs of strong etching could be seen on the SEM pictures. Redeposition of etched material seemed to take place inside the pores. On the contrary, ammonia plasma was soft and caused cleaning the surface and pores enlargement. Performance of ammonia plasma modified membranes was greatly improved and independent on solution pH. The last observation proved amphoteric character of the surface. NH₃/Ar plasma treatment gave membranes of acidic surface and filtration indices not so good as for ammonia plasma.     

高选择性透过二氧化硫气体分离膜的研究 （Ⅳ）不同烃基乙烯基亚砜接枝聚乙烯醇膜的透过性能

研究了不同烃基乙烯基亚砜接枝聚乙烯醇（ＰＶＡ－ＲＶＳＯ，Ｒ＝Ｍｅ，Ｅｔ，ｔ－Ｂｕ，Ｐｈ）膜对纯ＳＯ２、Ｎ２的透过性能以及ＳＯ２／Ｎ２混合气体的分离性能．结果表明上述膜对ＳＯ２具有高的选择性．对不同烃基乙烯基亚砜接枝膜进行了比较．