Selective transport of cesium ion in polymeric CTA membrane containing calixcrown ethers

A series of calixcrown ethers for which the cavity size of the crown ring is varied from crown-6 to crown-7 to crown-8 were examined for the transport abilities toward alkali metal ions. These ligands were incorporated into supported liquid membranes (SLMs) and into polymer inclusion membranes (PIMs) composed of cellulose triacetate (CTA) as a support and 2-nitrophenyl octyl ether (NPOE) and tris(2-butoxyethyl) phosphate (TBEP) as a plasticizer. In both membrane systems, calixcrown-6 showed the best selectivity toward a cesium ion over other alkali metal ions. The polymeric CTA membrane showed more rapid transport rate as well as higher durability than did the SLMs.     

Affinity enrichment of plasma membrane for proteomics analysis

Proteomics analysis of plasma membranes from cells exposed to different extracellular environments is potentially a powerful approach for the identification of membrane-associated proteins responding to these environments. Preparation of high concentration plasma membrane fractions with low contamination from cellular organelles is essential for such studies. Here, we describe an affinity enrichment method, which combines cell surface biotinylation with affinity enrichment by immobilized streptavidin beads, for the isolation of plasma membranes. This method results in a 400-fold enrichment of plasma membrane relative to endoplasmic reticulum, a major contaminant in standard plasma membrane preparations, and dramatically reduces contamination from other cellular organelles. The biotinylation reaction did not interfere with ligand-dependent activation of receptor tyrosine kinases or G-protein coupled receptors, suggesting cell-surface signal transduction machinery remains functional. Membrane fractions prepared by this method should provide excellent starting materials for membrane proteomics analysis such as studies of dynamic trafficking and regulation of signaling molecules or identification of disease-specific membrane markers.     

Pulsed field gradient NMR on polybutylcyanoacrylate nanocapsules

The applicability of pulsed field gradient nuclear magnetic resonance spectroscopy to nanocapsule systems is demonstrated on dispersed poly-n-butylcyanoacrylate nanocapsules as a model system. Spectroscopic data are presented that allow for the structural characterization of the inner cavities, the observation of Brownian motion of the capsules and the detection of rapid molecular exchange through the capsule walls. An analytical formula is proposed that yields equilibrium populations and average residence times of a given tracer molecule, thus leading to crucial information regarding the permeability of the capsule walls. Based on these analytical methods, two varieties of nanocapsules are compared that derive from two different preparation procedures. It is found that thinner capsule walls obtained under acidic conditions of the organic phase during interfacial polymerization lead to correspondingly higher exchange rates of benzene as a tracer molecule.     

Effect of solution chemistry on the surface charge of polymeric reverse osmosis and nanofiltration membranes

A streaming potential analyzer has been used to investigate the effect of solution chemistry on the surface charge of four commercial reverse osmosis and nanofiltration membranes. Zeta potentials of these membranes were analyzed for aqueous solutions of various chemical compositions over a pH range of 2 to 9. In the presence of an indifferent electrolyte (NaCl), the isoelectric points of these membranes range from 3.0 to 5.2. The curves of zeta potential versus solution pH for all membranes display a shape characteristic of amphoteric surfaces with acidic and basic functional groups. Results with salts containing divalent ions (CaCl₂, Na₂SO₄, and MgSO₄) indicate that divalent cations more readily adsorb to the membrane surface than divalent anions, especially in the higher pH range. Three sources of humic acid, Suwannee River humic acid, peat humic acid, and Aldrich humic acid, were used to investigate the effect of dissolved natural organic matter on membrane surface charge. Other solution chemistries involved in this investigation include an anionic surfactant (sodium dodecyl sulfate) and a cationic surfactant (dodecyltrimethylammonium bromide). Results show that humic substances and surfactants readily adsorb to the membrane surface and markedly influence the membrane surface charge.     

High performance polyethersulfone UF membrane for manufacturing spiral wound module: preparation,morphology, performance,and chemical cleaning

Large sheet asymmetric polyethersulfone (PES) ultrafiltration membranes were prepared via phase inversion process in a continuous conveyor system with addition of PVP to the casting solution. Dimethylacetamide (DMAc) and mixture of water and isopropyl alcohol (70/30 v%) were used as solvent and non‐solvent respectively. The prepared membrane was 0.96 m wide and 3 m long. The pieces of the membrane were selected randomly for characterization in terms of performance using cross flow filtration for milk concentration, image analysis, scanning electron microscopy (SEM), and cleaning procedures. It was found that the prepared membrane has high porosity and high water flux during milk filtration. In addition, cleaning experiments indicated that NaOH/HCl/NaOH sequence is an effective procedure for cleaning the fouled membrane during milk concentration. Copyright © 2007 John Wiley & Sons, Ltd.     

Mass transfer and benzene removal from air using latex rubber tubing and a hollow-fiber membrane module

A dense-phase latex rubber tube and a polyporous propylene hollow-fiber membrane module (HFMM) were investigated for control of benzene-contaminated gas streams. The abiotic mass flux observed through the latex tube was 3.9–13 mg/(min·m²) for 150 ppm of benzene at various gas and liquid flow rates, while a 100-fold lower mass flux was observed in the HFMM. After seeding with an aromatic-degrading culture enriched from activated sludge, the observed removal was 80% of 150 ppm, corresponding toa mass flux of 45 mg/(min·m²). The observed mass flux through the HFMM during biofiltration also rose, to 0.4 mg/(min·m²). Because the HFMM had a 50-fold higher surface area than the latex tube, the observed ben zene removal was 99.8%. Compared to conventional biofilters, the two reactors had modest elimination capacities, 2.5–18 g/(m³·h) in the latex tube membrane bioreactor and 4.8–58 g/(m³·h) in the HFMM. Although the HFMM had a higher elimination capacity, the gas-phase pressure drop was much greater.     

GAS TRANSPORT PROPERTIES OF A POLYIMIDE BASED ON 2, 2-BIS (3, 4-DECARBOXYPHENYL) HEXAFLUOROPROPANE AND meta-PHENYLENEDIAMINE

By means of a vacuum time-lag method, gas transport properties of apolyimide based on 2, 2- bis (3, 4- decarboxyphenyl ) hexafluoropropane dianhydride (6FDA )and meta- phenylenediamine (mPDA ) have been measured as a function of upstream pres-sure and temperature. The results show that no gas-induced plasticization occurs for thispolyimide in the upstream pressure range from 1 atm to 20atm. The temperature depen-dence of P and D can be described by the Arrhenius equations. The activation energiesof permeation and diffusion were obtained for the gas/polymer pair studied and correlatedwith the size of penetrant gas.     

温度和压力对六氟二酐型聚酰亚胺的透气性能的影响

本文研究了温度和压力对五种六氟二酐（６ＦＤＡ）型聚酰亚胺膜对Ｈ_２、ＣＯ_２、Ｏ_２、Ｎ_２和ＣＨ_４五种气体透过性能的影响．在３０－１００℃区间，五种聚酰亚胺的透气系数与温度的关系均符合Ａｒｒｈｅｎｉｕｓ关系式；在０．３－１．２ＭＰａ区间，压力对透气系数的影响很小．６ＦＤＡ－４，４＇－二氨基二苯酮（ＤＡＢＰ）和６ＦＤＡ－３，３＇－二甲基二苯甲烷二胺（ＤＭＭＤＡ）在１００℃仍然具有较大的透气选择系数，是比较好的气体分离膜材料．     

New film-forming poly(urethane-amide-imide) block copolymers: influence of soft block on membrane properties for the purification of a fuel octane enhancer by pervaporation

A new family of eight poly(urethane-amide-imide) (PUAI) block copolymers with the same hard block and different soft blocks were synthesized in two steps from a dianhydride monomer containing amide functions (4,4′-methylene-bis(trimellitic anhydride-N-phenylamide)) and α,ω-dihydroxy telechelic oligomers which varied in both chemical structure (polyethers: PEG, PTMG, PPG; polyester: PCL) and molar weight (MW ≅ 600 or 1000 g/mol). The PUAI were obtained in high yields (ranging from 81 to 98 wt%) and with reduced viscosities which varied from 0.36 to 0.84 dL/g (for C = 1 mg/mL in DMF at 25 °C). Their characterization by FTIR and ¹H NMR fully confirmed their chemical structure. Their solubility was typically limited to a few wt/vol% even in strong apolar diprotic solvents like DMF and NMP. This particular feature showed the very strong physical cross-linking of their very stiff hard block and enabled to cast membranes capable of withstanding exposure to many common organic solvents. Systematic permeability experiments showed that the PUAI membranes could be used to separate the azeotropic mixture EtOH (20 wt%)/ETBE very easily, with interesting prospects for the purification of ETBE (a fuel octane enhancer used instead of lead derivatives in the European Community). An analysis in terms of structure-property relationships pointed out that the soft block molar weight and polarity were two key parameters for the optimization of selective permeability. The best compromise was obtained with the soft block PEG1000. The corresponding polymer led to performances so far outstanding for polyamideimides with a very high flux of more than 1.1 kg/h m² for a normalized thickness of 5 μm at 50 °C and a selectivity α = 22.7 in the high range for this kind of separation.     

Zr（Ⅳ）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应．实验中制备了两类具有强酸催化活性的ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％．