聚氯乙烯接枝丙烯酸稀土的研究

将无机稀土有机化后与聚氯乙烯(PVC)进行接枝共聚。探讨了氧化稀土与丙烯酸反应、PVC接枝丙烯酸稀土的原理和方法，并通过红外光谱、扫描电镜对接枝共聚物进行定性表征，用微量热天平对接枝共聚物的热性能进行测定。实验结果表明，经丙烯酸稀土接枝共聚后的PVC，其耐热分解性能和韧性有了明显的提高。     

Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA     

Characterisation of raw materials for production of ceramics

The aim of this paper is to characterize some raw materials used for ceramics material production. Five samples of clay have been analyzed. It has been carried out a patterned sampling in a quarry in Rosarno (South Italy). Chemical-physical properties on clay samples are determined. Test pieces have been prepared and physical properties after firing are determined by DSC thermal analysis, XRD analysis and X-ray fluorescence. It is important to note the high amount of Fe₂O₃. The mixture principally contains quartz, illite and oligoclase. It has been observed the colour and the shape after firing: predominant colour is red. In this case the clay has been used in mixtures covered with glazes. The colour of internal clay is hidden by opaque of glazes. The analysed raw materials can be used in a slip for single fired red tiles. The A2sp clay produces best ceramics at 1000°C.     

氯化钠在球形纳米氧化铈形成过程中的作用

以水合碳酸铈为原料, 以氯化钠作为助磨剂和阻聚剂, 采用机械活化法制备了球形纳米氧化铈, 用XRD法研究了水合碳酸铈与氯化钠质量比、球磨时间、煅烧温度对CeO2粉体晶粒度的影响, 用TEM对最终产物粒子进行形貌观察. 结果表明: 在碳酸铈的球磨过程及其随后的煅烧过程中, 氯化钠的存在起到了很好的助磨和阻聚作用, 所得CeO2为类球形粒子, 分散性较好, 晶粒度约为30～50 nm.     

Some aspects of diffusion: fluctuations in reaction diffusion,and geometric influences in nonuniform media

Summary We deal with two diffusion problems: Space-integrated conserved entities characterizing very fast - diffusion - controlled reactions, such as time lags, etc. are universal. They are given by relationships which do not reflect the failure of the mean field hydrodynamic equations. We present another application which does not reflect this failure, for determining the surface flux via a diffusion controlled reaction producing a colored product. Another anomalous diffusion process we considered is transport through cellular materials whose cell sizes are highly nonuniform. We have analyzed the effects of extreme nonuniformity by considering fractal-like models of cellular solids. The diffusion current through these models can exhibit anomalous time-dependencies which are not predicted by the diffusion equation. In particular, it is shown that the initial diffusion current can be characterized by a power-law dependence on the time. Furthermore, the exponent of the power law is given in terms of the distribution of cell sizes in the fractal-like cellular solid.     

Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

This paper studied the effect of pH and the viscosity of feed solution on the mass transfer in two different specifications of hydrophobic hollow fiber membrane contactors. Experimental results showed that the pH of the feed had a significant effect on the rate of mass transfer, the flux and the removal efficiency of easily ionized volatile compounds (VCs), such as ammonia. In unbuffered feed solutions, both the resistance of membrane and the resistance of feed side were affected by the pH of feed and both of them had contributions to the overall mass transfer. A model, , was proposed to predict the effect of pH and gave good agreement with the experimental data for the two contactors. The relationship between viscosities and the mass transfer coefficient could be described by . Based on our experiments, the change of the viscosities in the concentration range of ammonia from 50 to 10,000 mg l⁻¹ caused about 3–4% variation of the mass transfer coefficients. Moreover, it may be more suitable to use the equilibrium concentrations of volatile species instead of the total concentrations of VCs to estimate mass transfer coefficients, removal efficiency and flux. Experimental results also revealed that the choice of the pH of feed might be one of the most crucial factors for removing easily ionized VCs, such as ammonia, from water and wastewater.     

Temperature programmed reduction of silica supported nickel catalysts

Nickel oxide promoted catalysts are prepared by simple precipitation, precipitation from homogeneous solution and impregnation methods and their reduction behavior is monitored with temperature programmed reduction (TPR) technique. The effect of different parameters such as metal loading, method of preparation and heat treatment temperature are also observed on the reducibility of the catalysts. It is observed that reduction temperature increases with the increase of calcination temperature. Results indicate that the interactions between nickel oxide and silica begin with the increase of calcination temperature which leads to the formation of nickel hydrosilicates and are responsible for high temperature reduction peaks.     

掺杂稀土元素对细晶BaTiO_3系统耐压及介电性能的影响

研究了稀土元素Ho2O3和Er2O3掺杂BaTiO3基瓷料,其在BaTiO3系晶粒中可抑制晶粒生长,使晶粒尺寸变小,体密度增高,呈现细晶效应,ε峰在整个温区范围内弥散,提高室温下介电常数,减小容量变化率。本系统中三价稀土氧化物Ho2O3和Er2O3等物质同时加入到BaTiO3陶瓷中后,稀土氧化物没有全部进入晶格内部发生取代,其中的一部分与其他添加剂形成一些非铁电相,提高耐压;另一部分留在晶界处,成为晶粒抑制剂,使得晶粒细小,瓷体致密,提高陶瓷的耐压。