Efficient esterification of carboxylic acids and phosphonic acids with trialkyl orthoacetate in ionic liquid

An operationally simple, inexpensive, efficient, and environmentally friendly esterification of various carboxylic acids, phosphonic acids, and phosphinic acids with triethyl orthoacetate or trimethyl orthoacetate under neutral conditions in a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate, was successfully carried out to provide the corresponding ethyl esters or methyl esters in high yields.     

Estimation of the absolute internal-rotation entropy of molecules with two torsional degrees of freedom from stochastic simulations

A method of statistical estimation is applied to the problem of evaluating the absolute entropy of internal rotation in a molecule with two torsional degrees of freedom. The configurational part of the entropy is obtained as that of the joint probability density of an arbitrary form represented by a two-dimensional Fourier series, the coefficients of which are statistically estimated using a sample of the torsional angles of the molecule obtained by a stochastic simulation. The internal rotors in the molecule are assumed to be attached to a common frame, and their reduced moments of inertia are initially calculated as functions of the two torsional angles, but averaged over all the remaining internal degrees of freedom using the stochastic-simulation sample of the atomic configurations of the molecule. The torsional-angle dependence of the reduced moments of inertia can be also averaged out, and the absolute internal-rotation entropy of the molecule is obtained in a good approximation as the sum of the configurational entropy and a kinetic contribution fully determined by the averaged reduced moments of inertia. The method is illustrated using Monte Carlo simulations of isomers of stilbene and halogenated derivatives of propane. The two torsional angles in cis-stilbene are found to be much more strongly correlated than those in trans-stilbene, while the degree of the angular correlation in propane increases strongly on substitution of hydrogen atoms with chlorine.     

Comparison between potentiostatic and galvanostatic intermittent titration techniques for determination of chemical diffusion coefficients in ion-insertion electrodes

Using well-cycled, thin composite graphite electrodes we analyze carefully the limitations of potentiostatic and galvanostatic intermittent titration techniques (PITT and GITT, respectively) for determination of the differential (incremental) intercalation capacitance, C_dif, and the chemical diffusion coefficient, D, of Li ions in these ion-insertion electrodes (IIEs). We demonstrate the superiority of the GITT over PITT to determine these quantities as the former technique allows for a more accurate determination of C_dif and hence D which closely approach to the spinodal domain related to the first-order phase transition during ion-insertion. We show that GITT is also more effective in eliminating the parasitic contributions of background currents to the total measured response. A pronounced difference in the initial, intrinsic kinetics of formation of a new phase in the bulk of the old one has been observed depending on the direction of titration (phases less saturated with Li are formed faster during deintercalation than the Li-rich phases in the course of intercalation).     

Reaction of β-aminopropionohydroxamic acid with aldehydes and ketones

β-Aminopropionohydroxamic acid reacts with aliphatic aldehydes or ketones to give 2-substituted 1-hydroxytetrahydropyrimidin-6-ones, while its reaction with aromatic carbonyl compounds leads to either the same products or Schiff's bases, which can exist in tautomeric equilibrium in solution. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 691–694, April, 1998.     

Bestimmung der Trichloressigs?ure durch Absorptions- und Fluorescenzmessung

Zusammenfassung Für die Rückstandsanalyse der als Herbicid verwendeten Trichloressigsäure (TCA) wurde eine Methode sowohl für die Absorption- sals auch für die Fluorescenzmessung entwickelt. TCA wird im stark alkalischen Milieu zu Chloroform abgebaut und mit Pyridin zu einer Schiffchen Base umgesetzt (Fujiwara-Reaktion). Diese rote instabile Verbindung wird mit Barbitursäure in einen beständigen Pentamethinfarbstoff überführt, dessen Absorptionsmaximum bei 594 nm liegt. Als Untersuchungsmaterial dienten Bodenproben. Bei einer Einwaage von 100 g Boden lassen sich noch 0,1 ppm TCA nachweisen. Durch Fluorescenzmessung (Anregungsmaximum 588 nm, Emissionsmaximum 611 nm) werden bei gleichen Versuchsbedingungen noch 0,01 ppm erfaßt.

---

Determination of trichloroacetic acid by absorption spectrometry and fluorometry

Summary A method for absorption and fluorescence measuring of the residues of trichloroacetic acid (TCA) used as herbicide was developed. TCA was decarboxylated with strong alkali and converted with pyridine to a Schiff's base (Fujiwara reaction). After the reaction of the Schiff's base with barbituric acid a stable pentamethin dyestuff was formed. The maximum absorbance occurs at 594 nm. Samples of soil were analysed. In a sample of at least 100 g 0.1 ppm of TCA are still detectable. By fluorometry (excitation maximum 588 nm, emission maximum 611 nm) the detection limit is at 0.01 ppm under the same conditions.

     

Novel electroanalytical techniques for pollution analysis

Summary Two new analytical techniques are described. The so-called injection technique operates on evaluating a dynamic concentration signal as a result of following the concentration change in a certain part of a flow-through channel after injecting a sample or reagent at a small volume into the current of an appropriate solution flowing at a constant rate.The second technique, the programmed coulometric titration technique, also uses the flow-through channel principle; that means this novel technique allows the more precise titrimetric way of analysis in flowing solutions. In the case of both techniques potentiometric and voltammetric detectors were involved. Several examples proved the multifold advantages of these techniques for environmental analysis.

---

Neue elektroanalytische Verfahren für die Umweltanalyse

Zusammenfassung Zwei neue Methoden werden beschrieben. Die sog. Injektionstechnik wertet ein dynamisches Konzentrationssignal aus, das sich aus der Änderung in einem Durchflußkanal ergibt, wenn Probe oder Reagens in kleinen Volumina in einen konstant fließenden Flüssigstrom injiziert werden. Das zweite Verfahren, die programmierte coulometrische Titration, erlaubt die Anwendung der genaueren titrimetrischen Technik auf fließende Lösungen. Bei beiden Methoden werden potentiometrische und voltammetrische Detektoren verwendet. Mehrere Beispiele zeigen die vielfachen Vorteile dieser Verfahren bei der Anwendung auf die Analyse von Umweltmaterial.

Presented at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria     

Phasentransferkatalysatoren auf Basis von Saccharose-Ethylenoxid-Addukten

Sucrose ethyleneoxide adducts have been prepared by reaction of sucrose with various amounts of ethyleneoxide inDMSO. The resulting polypode molecules were found to be efficient phase transfer catalysts in nucleophilic substitutions, oxidation and dichlorcarbene generation. Polymerisable polypodes have been obtained by reaction of sucrose ethyleneoxide adducts with methacrylic anhydride or methacryloylchloride in pyridine. Free radical polymerisation of the resulting mixtures of mono- and polyfunctional methacrylic esters of sucrose ethyleneoxide adducts yielded crosslinked gels. These polymer-supported octopus-molecules were found to be efficient triphase catalysts.

     

Rearrangements of the carbanions derived from allyl benzyl thioether

The metalation of allyl benzyl thioether involves the benzylic or the allylic hydrogens. The benzylic carbanion undergoes a rapid[2,3] sigmatropic shift whereas the allylic carbanion gives rise to various rearrangements, among them migration of the allylic unit to the para position with allylic inversion. The temperature dependence of the ratio of products arising from the benzylic carbanion vs those from the allylic carbanion shows that the allylic-to-benzylic carbanion transformation occurs only under special conditions: (a) with slow addition of the base; (b) with thioether in excess relative to the base, and (c) on raising the temperature of the reaction medium from ?78° to ?15°. In the last instance, the proton transfer is intramolecular as shown with labeled thioethers. The extent of the different rearrangements depends on the temperature and solvent. A choice of mechanism cannot be made at this time for the para migration 5→9a. A leaving group effect on the reaction regioselectivity of the carbanion from allyl methyl thioether with benzyl halides has been noticed. The presence of dibenzyl indicates that, in addition to S_N2 reactions, some electron transfer process is occurring.     

Carboxylic acid functionalization of nylon 6 by radiation grafting and conversion to zinc salts: Effects on physical properties

 Functionalization of polymers by grafting monomeric species on to the backbone of molecular chains with the use of γ-radiation has been used extensively. In this work methacrylic acid was grafted onto a commercial grade of polycaproamide (Nylon 6) by preirradiating the polymer granules to 15 kGy at a rate of 1.0 kGy per hour and subsequently immersing these in a 10% aqueous solution of methacrylic acid in the presence of small quantities of FeSO₄ as homopolymerization inhibitor. The polymer was subsequently neutralized by mixing it with zinc acetylacetonate in a laboratory scale melt mixing device. The acid-grafting polymer modification resulted in an increase in glass transition temperature, while the addition of zinc acetylacetonate gave rise to two transitions: The lower transition corresponds to a miscible mixture of free polyamide and acid-grafted polymer, both plasticized with undecomposed zinc compound, while the upper transition corresponds to the zinc salt of the acid grafted polyamide. Through rheological measurements it was shown that both the acid-grafted polymer and the derived zinc salt have a branched structure, possibly containing also some crosslinked domains. Large improvements in solvent resistance were observed for both type of polymer modifications. Received: 13 December 1996 Accepted: 10 February 1997     

杂多酸在活性炭上的固载化Ⅲ．活性炭在酸性介质中对钨硅杂多酸（SiW_（12））的吸附

在氢离子浓度均为３ｍｏｌ／Ｌ的硫酸，盐酸，磷酸，醋酸水溶液中和冰醋酸中研究了具有Ｋｅｇｇｉｎ结构的硅钨杂多酸（ＳｉＷ＿（１２））在不同来源活性炭上的吸附作用。各活性炭对ＳｉＷ＿（１２）吸附等温线的形式是不相同的，吸附剂载体的微孔结构以及杂多酸的溶剂化起着重要的作用。并且在无机酸介质中，杂多酸的吸附量比在水溶液中成规律性地增加，且与酸强度成正比关系。在有机酸介质中，吸附作用比较复杂。根据所得结果，提出了在酸性介质中杂多酸在活性炭表面的吸附模型。