Effect of Polycondensation Reaction Conditions on the Properties of Thermotropic Liquid‐Crystalline Copolyester

In this study a range of wholly aromatic copolyesters based on kink m‐acetoxybenzoic acid (m‐ABA) monomer (33 mol%) and equimolar‐linear p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephthalic acid (TPA) monomers (67 mol%) have been synthesized by melt polycondensation reaction process at 280°C and 260°C for different time intervals. Characterization of copolyesters were performed by solution viscosity measurement, wide–angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), hot‐stage polarized light microscopy, proton‐nuclear magnetic resonance analysis (¹H‐NMR). According to the results obtained, copolyesters showed thermotropic liquid crystalline behavior in an appropriate temperature range. The copolyesters were prepared in high yields. It was observed that the intrinsic viscosities of the copolyesters are increased regularly with increasing polymerization time and temperature. All the copolyesters were soluble in a trifluoroacetic acid/dichloromethane (30:70 v/v) except the copolyesters which were synthesized at 280°C in 5 h. According to the WAXD results; the degree of crystallinity of copolyesters were found to be between 5–15%. DSC and hot stage polarized light microscopy results showed that all the copolyesters are melt processable and a significant molecular interaction exist in a very broad temperature range (160°C and 165°C) in the nematic mesophase. The T_g values are increased with an increasing polycondensation reaction time and temperature and they were observed between 93–126°C. Fibers prepared by a hand‐spinning technique from the polymer melt exhibit well‐developed fibrillar structure parallel to the fiber axis.     

A correlation between the variable melt flow index and the molecular mass distribution of virgin and recycled polypropylene used in the manufacturing of battery cases

This study looked at establishing a correlation between the variable melt flow index (VMFI) values of molten polypropylene (PP) with different piston-load masses using a standard MFI analyser. The study was done using virgin PP and recycled PP obtained from recycling Pb-acid batteries. The study showed that the results would fit a suitable power function equation where the size of the exponent reflects the increase in flow characteristics of the polymer with increased piston-load mass. The established correlation was then compared to the average molecular weight distribution of virgin PP determined by gel permeation chromatography (GPC). Good agreement was obtained for the range of grades of virgin PP samples that correlated well with the Mark-Houwink power law where the inverse of the MFI (1/MFI) would be proportional to the average molecular weight to the power of 3.4 (Mw^3.4). GPC analysis cannot be effectively used to study recycled PP, where a number of factors can influence the melt flow properties such as fillers, impurities and the presence of polyethylene in the polymer matrix. Instead, a comparative understanding of the flow behaviour of recycled PP to that of virgin PP was done by using the VMFI method to possibly show the dissimilar polymer melt flow behaviour of using virgin and recycled PP material in injection moulding of new battery cases and lids, or when attempting to seal the lid to the battery case during manufacturing.     

Mixing of Racemic Poly(L-lactide)/Poly(D-lactide) Blend with Miscible Poly(D,L-lactide):Toward All Stereocomplex-type Polylactide with Strikingly Enhanced SC Crystallizability

Stereocomplex-type polylactide (SC-PLA) consisting of alternatively arranged poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) chains has gained a good reputation as a sustainable engineering plastic with outstanding heat resistance and durability,however its practical applications have been considerably hindered by the weak SC crystallizability.Current methods used to enhance the SC crystallizability are generally achieved at the expense of the precious bio-renewability and/or bio-degradability of PLAs.Herein,we demonstrate a feasible method to address these challenges by incorporating small amounts of poly(D,L-lactide) (PDLLA) into linear high-molecular-weight PLLA/PDLA blends.The results show that the incorporation of the atactic PDLLA leads to a significant enhancement in the SC crystallizability because its good miscibility with the isotactic PLAs makes it possible to greatly improve the chain mixing between PLLA and PDLA as an effective compatibilizer.Meanwhile,the melt stability (i.e.,the stability of PLLA/PDLA chain assemblies upon melting) could also be improved substantially.Very intriguingly,SC crystallites are predominantly formed with increasing content and molecular weight of PDLLA.More notably,exclusive SC crystallization can be obtained in the racemic blends with 20 wt％ PDLLA having weight-average molecular weight of above 1 ×10s g/mol,where the chain mixing level and intermolecular interactions between the PLA enantiomers could be strikingly enhanced.Overall,our work could not only open a promising horizon for the development of all SC-PLA-based engineering plastic with exceptional SC crystallizability but also give a fundamental insight into the crucial role of PDLLA in improving the SC crystallizability of PLLA/PDLA blends.     

Synthesis and properties of thermally stable polyimides bearing pendent fluorene moieties

A new diamine monomer containing fluorene unit, 3,5‐diamino‐N‐(9H‐fluoren‐2‐yl)benzamide was successfully synthesized via the condensation of 2‐aminofluorene and 3,5‐dinitrobenzoyl chloride and subsequent reduction of the dinitro compound. A series of novel aromatic polyimides having pendent fluorenamide moieties were prepared from the reaction of the diamine monomer and various tetracarboxylic dianhydrides by a conventional two‐step polymerization process. The polyimides were obtained in quantitative yields with inherent viscosities of 0.33–0.44 dl/g. The resulting polymers dissolved in N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. The glass transition temperature of these polymers was in the range of 261–289°C. They were fairly stable up to a temperature around 450°C and lost 10% weight in the range of 498–556°C in nitrogen. The UV–vis absorption spectra showed that all of the polymers had absorption maxima around 320 nm. Cyclic voltammograms of the polyimides revealed an oxidation wave with a peak around 1.3 V. Copyright © 2014 John Wiley & Sons, Ltd.     

Dual-Function HKUST-1: Templating and Catalyzing Formation of Graphitic Carbon Nitride Quantum Dots Under Mild Conditions

Graphitic carbon nitride quantum dots (g-CNQDs) are highly promising photoresponsive materials. However, synthesis of monodispersed g-CNQDs remains challenging. Here we report the dual function of MOF [Cu₃BTC₂] (HKUST-1) as a catalyst and template simultaneously to prepare g-CNQDs under mild conditions. Cyanamide (CA), a graphitic carbon nitride precursor, catalytically dimerized inside the larger MOF cavities at 90 °C and condensed into g-CNQDs at 120 °C in a controlled fashion. The HKUST-1 template was stable under the reaction conditions, leading to uniform g-CNQDs with a particle size of 2.22±0.68 nm. The as prepared g-CNQDs showed photoluminescence emission with a quantum yield of 3.1 %. This concept (MOF dual functionality) for catalyzing CA polycondensation (open metal sites (OMSs) effect) and controlling the produced particle size (pore-templating effect), together with the tunable MOF porosity, is expected to produce unique g-CNQDs with controllable size, morphology, and surface functionality.     

Preparation and structural determination of siloxane-modified sulfone-containing epoxy resins

Siloxane-modified sulfone-containing epoxy resins (ESBS) were prepared by polycondensation of PMPS and/or PDMS siloxane oligomers with EBS, the sulfone-containing epoxy resin. Structures were analyzed by IR, ¹H-, and ¹³C-NMR. The siloxane content in the copolymers was determined by ¹H-NMR with an integration technique. Epoxy equivalent weight (EEW) determination indicated that the oxirane ring of EBS was intact with this hot-melt procedure. The GPC measurement of these ESBS copolymers showed that molecular weight (MW) increased with increasing siloxane content in PMPS-modified copolymers. Evidence of siloxane incorporation in the copolymer was discussed. © 1996 John Wiley & Sons, Inc.     

Synthesis of silylene-vinylene oligomers via catalytic polycondensation of divinyldimethylsilane

Acyclic diene polymerization (ADP) of divinyldimethylsilane in the presence of ruthenium RuCl₂(PPh₃)₃ and rhodium [RhCl(cod)]₂ catalysts led predominantly to linear silylene-vinylene oligomers (M_n = 1510 and M_w/M_n = 1.19) if the ruthenium catalyst was used or to mixture of cyclic and linear oligomers if rhodium complex was catalyst. © 1996 John Wiley & Sons, Inc.     

浅析高分子树脂无溶剂生产技术中的高分子凝聚态相关化学问题

在没有溶剂介质参与的高分子聚合反应中,高分子凝聚态的变化与化学反应之间的作用关系变得更加直接。以熔融聚合、反应挤出、固相聚合为代表的高分子树脂无溶剂生产技术是集高分子树脂合成、材料加工制备及工程一体化的新兴科学与技术,是当代材料科学领域发展的前沿领域,代表着高分子树脂生产技术发展的必然趋势。本文将上述这三种典型的树脂工业合成技术及相应机理进行了简要的介绍,并分别以聚对苯二甲酸乙二醇酯(PET)和聚乳酸(PLA)的实际生产研究情况为例,展示三种生产技术之间的相互联系,揭示这三种无溶剂型高分子制备技术过程中出现的高分子凝聚态变化与化学反应之间的基本问题,为广大科研工作提供一些有价值的参考。     

Technological significance of sol-gel process and process-induced variations in sol-gel materials and coatings

A significant aspect of sol-gel technology is the capability it provides to affect the substructure of materials by controlling the nature and the kinetics of chemical reactions. This capability allows us to produce novel materials, design unique molecular and pore morphologies, circumvent high-temperature reactions, and modify material properties. The modifications include strongly thermodynamic-dependent high-temperature properties such as sintering, crystallization, and viscosity in glass and ceramic materials. A particularly exciting area for investigation is the optical-electronic field, where a significant dependence of electro-optical properties and photosensitivity on process-induced molecular-structural variations occurs. Understanding the basis for the creation of structural variations in sol-gel processes should have significant impact on the technologies and systems that use these materials. In this article, some fundamental aspects of alkoxide-based, sol-gel processes and thermochemical bases for process-induced structural variates are discussed.     

4-苯乙炔基苯胺封端聚酰亚胺树脂的合成与性能研究

使用4-苯乙炔基苯胺(4-PEA)作为反应性封端剂,和3,3′,4,4′-二苯醚四酸二酐(ODPA),3,3′,4,4′-联苯四酸二酐(BPDA),1,4-双(4′-氨基-2′-三氟甲基苯氧基)苯(BTPB)和3,4′-二氨基二苯醚(3,4-′ODA)反应合成了系列4-苯乙炔基苯基封端的聚酰亚胺低聚物,对低聚物的化学结构、热性能和熔体粘度以及固化后树脂的热性能等进行了研究.实验结果表明,低聚物均具有一定的结晶性,含有ODPA的聚酰亚胺低聚物较之含有BPDA的低聚物具有更低的熔体粘度,且出现最低熔体粘度的温度更低;固化后的树脂表现出良好的热性能,含有BPDA的树脂具有更高的玻璃化转变温度;系列低聚物中二胺单体的比例对于低聚物的熔体粘度和固化后树脂的热稳定性有一定影响.