1-己基-3-甲基咪唑四氯化铁盐固化环氧树脂E-51的反应特性

采用差示扫描(DSC)量热分析法研究了1-己基-3-甲基咪唑四氯化铁离子液体([C₆mim]FeCl₄)与双酚A型环氧树脂E-51的固化反应。结果显示,由于[C₆mim]FeCl₄包含多级胺基结构,因此可以作为E-51的高温固化剂使用,其与E-51的反应包含两个阶段:第一个阶段的反应放热峰峰顶温度约在120 ℃,第二个阶段的反应放热峰峰顶温度会随着[C₆mim]FeCl₄用量的增加而发生变化。当[C₆mim]FeCl₄与混合胺复配成新型固化剂时,二者产生明显的协同效应。通过恒温DSC实验发现,复配体系与E-51的固化反应可以在室温下发生,表现为在30 ℃固化反应放热峰峰顶放热时间为5 min左右,且随着恒温固化反应温度的提高,峰顶放热峰时间会缩短。非等温动力学结果显示:复配体系与E-51的反应活化能为979 J/mol,仅是混合胺体系的17%左右。反应级数为0.5表明这一固化反应是无规反应。     

Hydrophilic solid‐phase extraction of melamine with ampholine‐modified hybrid organic–inorganic silica material

In this work, an ampholine‐functionalized hybrid organic–inorganic silica sorbent was successfully used to extract melamine from a milk formula sample by a hydrophilic interaction solid‐phase extraction protocol. Primary factors affecting the extraction efficiency of the material such as extraction solvent, elution solvent, sample loading volume, and elution volume have been thoroughly optimized. Under the optimized hydrophilic solid‐phase extraction conditions, the recoveries of melamine spiked in milk formula samples ranged from 86.2 to 101.8% with relative standard deviations of 4.1–9.4% (n = 3). The limit of detection (S/N = 3) was 0.32 μg/g. The adsorption capacity toward melamine was 30 μg of melamine per grams of sorbent. Due to its simplicity, rapidity and cost effectiveness, the newly developed hydrophilic solid‐phase extraction method should provide a promising tool for daily monitoring of doped melamine in milk formula.     

Separation and purification of both tea seed polysaccharide and saponin from camellia cake extract using macroporous resin

A novel method to separate and purify tea seed polysaccharide and tea seed saponin from camellia cake extract by macroporous resin was developed. Among four kinds of resins (AB‐8, NKA‐9, XDA‐6, and D4020) tested, AB‐8 macroporous resin possessed optimal separating capacity for the two substances and thus was selected for the separation, in which deionized water was used to elute tea seed polysaccharide, 0.25% NaOH solution to remove the undesired pigments, and 90% ethanol to elute tea seed saponin. Further dynamic adsorption/desorption experiments on AB‐8 resin‐based column chromatography were conducted to obtain the optimal parameters. Under optimal dynamic adsorption and desorption conditions, 18.7 and 11.8% yield of tea seed polysaccharide and tea seed saponin were obtained with purities of 89.2 and 96.0%, respectively. The developed method provides a potential approach for the large‐scale production of tea seed polysaccharide and tea seed saponin from camellia cake.     

Preparation of melamine molecularly imprinted polymer by computer‐aided design

Melamine was chosen as template, methacrylic acid was chosen as functional monomer, and divinylbenzene, ethylene glycol dimethacrylate, trimethylolpropane trimethylacrylate were chosen as cross‐linking agents, respectively. The WB97XD/6‐31G(d, p) method was used to calculate the geometry optimization of the different imprinting ratios, the action sites, the bonding situation, and the optimization of the cross‐linking agents. The nature of the imprinting effect was also studied by the atoms in molecules theory. The theoretical results showed that melamine interacts with methacrylic acid by hydrogen bonding, and the melamine molecularly imprinted polymers with a molar ratio of 1:6 have the most hydrogen bonds and the most stable structure. Divinylbenzene is the best cross‐linking agent for the melamine molecularly imprinted polymers. The melamine molecularly imprinted polymers were synthesized by precipitation polymerization. The results showed that the maximum adsorption capacity for molecularly imprinted polymers towards melamine is 19.84 mg/g, and the adsorption quantity of the polymers to melamine is obviously higher than that of cyromazine, cyanuric acid, and trithiocyanuric in milk. This study could provide theoretical and experimental references for the screening of the imprinting ratio and the cross‐linking agent for the given template and monomer system.     

新型三官能团脂环族环氧化合物的合成、表征及其阳离子引发光固化活性研究

以双环戊二烯等为原料合成一种新型三官能团液体脂环族环氧树脂. 通过红外光谱、 核磁共振氢谱及质谱等对其中间体及环氧树脂的结构进行了表征. 所得脂环族环氧树脂采用阳离子引发 剂二甲苯基碘鎓六氟磷酸盐引发进行紫外光固化, 对其光固化活性进行了研究, 同时讨论了氧化剂过氧化苯甲酰对该光固化体系的增感作用. 研究结果表明, 新合成的脂环族环氧树脂采用二甲苯基碘鎓六氟磷酸盐引发可以进行光固化, 过氧化苯甲酰明显地加快了其光固化速度, 固化膜具有较好的热稳定性.     

DH-2树脂对镝的吸附及机理

研究了镝离子在HD-2树脂上的吸附行为。在HAc-NaAc体系pH=6.20时吸附最佳,测得静态饱和吸附容量为356mg/g(树脂),用0.1~2.0 mol/L HC l可定量洗脱,表观速率常数k198=1.16×105s-1,表观活化能Ea=16.1kJ/mol。等温吸附服从Freun ilich经验式,吸附热力学参数△H=16.5kJ/mol,△S=58.2 J/(mol.K),△G298=-0.859kJ/mol。用化学和红外光谱等方法讨论了吸附机理。     

耐高温阴离子交换树脂的合成及在环氧乙烷催化水合反应中的应用

我们合成了一种新型结构的季铵型阴离子交换树脂催化剂(NC-1),并将其转型为碳酸氢根型应用于环氧乙烷(EO)催化水合反应.并用NC-1、D201树脂催化EO水合反应进行了考察.NC-1型离子交换树脂催化剂,因具有较好的热稳定性,其使用寿命比D201树脂提高到数十倍.同时,还设计了一种“二步法”新型水合工艺,与传统水合工艺相比,这种工艺有效地抑制了树脂催化剂的膨胀.在使用105h后,催化剂的膨胀率由原来的76%下降到5%左右.     

分光光度法测定甲醛

重点论述了各种测定甲醛的分光光度法的现状及其改进,目前存在的不足之处及面临问题,同时展望了该法的前景。     

大孔吸附树脂对熊果酸吸附性能的研究

研究了从山楂叶中纯化熊果酸的柱层析工艺。静态吸附结果表明,X-5、NKA和AB-8树脂的吸附率分别为91.32%,72.28%和41.19%;以90%乙醇为洗脱剂,X-5、NKA和AB-8树脂的洗脱率分别为83%,70%,87%。静态实验表明X-5树脂具有较好的吸附解吸性能。动态实验优化了在X-5树脂中的流速、上样液的熊果酸浓度和上样体积。结果表明,流速为3BV/h(BV为倍量体积),上样液的熊果酸浓度为0.304mg/mL,上样体积为3BV为最优上样条件。动态洗脱中采用梯度洗脱方式,结果表明在90%的乙醇洗脱下,熊果酸纯度达93.21%。对层析工艺制备的熊果酸进行结晶处理,所获得的熊果酸纯度为98.61%,与熊果酸标准品的红外光谱一致。     

环氧树脂/层状无机物纳米复合材料

概述了近年来国内外环氧树脂／层状无机物纳米复合材料的研究现状，详细介绍厂环氧树脂／蒙脱土、环氧树脂／水滑石及环氧树脂／石墨三种代表性环氧树脂纳米复合材料的制备、性能及研究进展。