Free boundary viscous flows at micro and mesolevel during liquid composites moulding process

Numerical simulation aspects, related to low Reynolds number free boundary viscous flows at micro and mesolevel during the resin impregnation stage of the liquid composite moulding process (LCM), are presented in this article. A free boundary program (FBP), developed by the authors, is used to track the movement of the resin front accurately by accounting for the surface tension effects at the boundary. Issues related to the global and local mass conservation (GMC and LMC) are identified and discussed. Unsuitable conditions for LMC and consequently GMC are uncovered at low capillary numbers, and hence a strategy for the numerical simulation of such flows is suggested. FBP encompasses a set of subroutines that are linked to modules in ANSYS. FBP can capture the void formation dynamics based on the analysis developed. We present resin impregnation dynamics in two dimensions. Extension to three dimensions is a subject for further research. Several examples are shown and efficiency of different stabilization techniques are compared. Copyright © 2004 John Wiley & Sons, Ltd.     

UV‐ignited frontal polymerization of an epoxy resin

By combining frontal polymerization and radical‐induced cationic polymerization, it was possible to cure thick samples of an epoxy monomer bleached by UV light. The effect of the relative amounts of cationic photoinitiator and radical initiator was thoroughly investigated and was related to the front's velocity and its maximum temperature. The materials obtained were characterized by quantitative conversion also in the deeper layers, not reached by UV light. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2066–2072, 2004     

Exploitation of introducing of catalytic centers into layer galleries of layered silicates and related epoxy nanocomposites. I. Epoxy nanocomposites derived from montmorillonite modified with catalytic surfactant‐bearing carboxyl groups

Montmorillonite (MMT) was modified with the acidified cocamidopropyl betaine (CAB) and the resulting organo‐montmorillonite (O‐MMT) was dispersed in an epoxy/methyl tetrahydrophthalic anhydride system to form epoxy nanocomposites. The intercalation and exfoliation behavior of the epoxy nanocomposites were examined by X‐ray diffraction and transmission electron microscopy. The curing behavior and thermal property were investigated by in situ Fourier transform infrared spectroscopy and DSC, respectively. The results showed that MMT could be highly intercalated by acidified CAB, and O‐MMT could be easily dispersed in epoxy resin to form intercalated/exfoliated epoxy nanocomposites. When the O‐MMT loading was lower than 8 phr (relative to 100 phr resin), exfoliated nanocomposites were achieved. The glass‐transition temperatures (T_g's) of the exfoliated nanocomposite were 20 °C higher than that of the neat resin. At higher O‐MMT loading, partial exfoliation was achieved, and those samples possessed moderately higher T_g's as compared with the neat resin. O‐MMT showed an obviously catalytic nature toward the curing of epoxy resin. The curing rate of the epoxy compound increased with O‐MMT loading. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1192–1198, 2004     

Structure,morphology, and crystallization process of isotactic polypropylene/hydrogenated hydrocarbon resin blends

The structure, morphology, and isothermal and nonisothermal crystallization of isotactic polypropylene/low‐molecular‐mass hydrocarbon resin blends (iPP/HR) (up to 20% in weight of HR) have been studied, using optical and electron microscopy, wide‐ and small‐angle X‐ray and differential scanning calorimetry. New structures and morphologies can be activated, using appropriate preparation and crystallization conditions and blend composition. For every composition and crystallization condition, iPP crystallizes in α‐form, with a spherulitic morphology. The size of iPP spherulites increases with resin content, whereas the long period decreases. In the range of crystallization temperatures investigated, HR modifies the birefringence of iPP spherulites, favoring the formation of radial lamellae and changing the ratio between tangential and radial lamellae. Spherulitic radial growth rates, overall crystallization rates, and melting temperatures are strongly affected by resin, monotonically decreasing with resin content. This confirms miscibility in the melt between the two components of the blends. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3368–3379, 2004     

Synthesis of alkylN-(α-amidomethyl)glycinates from glycine esters,aroylamides, and formaldehyde

A one-step synthesis of alkylN-(-amidomethyl)glycinates from glycine esters or their salts, formaldehyde, and aroylamides was developed. The effect of the structure of the amide component and the reaction conditions on the yields of the products was investigated.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1078–1080, June, 1994.     

Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data

A kinetic analysis of the cyclotrimerisation reaction of a dicyanate ester monomer catalysed by cobalt(II) acetylacetonate and nonylphenol in air and argon atmospheres has been carried out by differential scanning calorimetry (DSC). Dynamic and isothermal DSC scans as well as the glass transition temperature are the experimental data obtained. From isothermal scans a higher cyanate conversion in air than in argon was obtained. The cyanate conversions are satisfactorily described with a second-order kinetic equation in the kinetically controlled region, and by m-order (m<1) equation after vitrification is reached. Activation energies determined by different procedures agree among them, showing slightly higher values in argon than in air.     

2-[6-Alkyl-3-hetaryl-4-oxo-9,10-dihydro-4H,8H-chromeno-[8,7-<Emphasis Type="Italic">e</Emphasis>][1,3]oxazin-9-yl]acetic acids

The interaction has been studied of a series of substituted 3-hetaryl-7-hydroxychromones with amino acids and formaldehyde (reactants ratio 1: 1: 2 respectively). In the case of glycine and Het = 3-isoxazolyl the product of aminomethylation at position 8 of the chromone was obtained, and with other Het (including Het = 4-phenyl-1,2,4-triazol-3-yl) 2-[6-alkyl-3-hetaryl-4-oxo-9,10-dihydro-4H,8H-chromeno[8,7-e][1,3]-oxazin-9-yl]acetic acids were formed. With β-alanine and Het = 4-phenyl-1,2,4-triazol-3-yl the corresponding β-substituted propionic acid was synthesized, but proline did not participate in the reaction, leading to bis(6-ethyl-3-hetaryl-7-hydroxychromon-8-yl)methane. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 683–689, May, 2007.     

Synthesis and characterization of poly(4-vinyl,2′-carboxybensophenone)

The synthesis and characterization of poly(4-vinyl,2′-carboxybenzophenone) ion exchange resin is described. This resin displays a remarkably high capacity for Cu²⁺. Control of pH permits selective adsorption and estimation of Fe³⁺. This ion-exchanger is quite stable to loading acid washing cycles. © 1995 John Wiley & Sons, Inc.     

新型含氮螯合树脂的制备及其吸附性能

以三甘醇和苯磺酰氯为原料,二乙烯三胺为交联剂合成了新型含氮螯合树脂(5),其结构经IR表征.讨论了Ni2 浓度和pH对5吸附容量的影响.动力学研究表明,5对Ni2 的吸附速率符合鲛岛公式.     

Effect of Biodegradable Coatings on the Growth of Aspergillus flavus In Vitro,on Maize Grains,and on the Quality of Tortillas during Storage

The fungus Aspergillus flavus causes serious damage to maize grains and its by-products, such as tortilla. Currently, animal and plant derivatives, such as chitosan and propolis, and plant extract residues, respectively, are employed as alternatives of synthetic fungicides. The objective of this research was to evaluate the efficacy of several formulations based on propolis-chitosan-pine resin extract on the in vitro growth of A. flavus, the growth of maize grain plantlets and the quality of stored tortillas at 4 and 28 °C. The most outstanding formulation was that based on 59.7% chitosan + 20% propolis nanoparticles + 20% pine resin extract nanoparticles; since the in vitro conidia germination of A. flavus did not occur, disease incidence on grains was 25–30% and in tortillas, 0% infection was recorded, along with low aflatoxin production (1.0 ppb). The grain germination and seedling growth were markedly reduced by the nanocoating application. The percentage weight loss and color of tortillas were more affected by this coating compared to the control, and the rollability fell within the scale of non-ruptured at 4 °C and partially ruptured at 28 °C. The next step is to evaluate the toxicity of this formulation.