Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Analysis of nitriles at low parts per million levels by capillary gas chromatography

Two methods have been developed for the determination of trace levels of acetonitrile and propionitrile in light naphthas. One involves clean-up and preconcentration by medium pressure liquid chromatography (MPLC) in which nitriles are concentrated ten-fold while the complex hydrocarbon matris is removed. The concentrated solution is then analyzed by high resolution GC with flame ionization detection. The second method involves direct injection of samples into a capillary GC equipped with chemiluminescence nitrogen detection. The results and repeatability obtained from both methods are comparable. Preconcentration enables identification by GC-MS and simultaneous analysis of other polar species, with no need for selective detectors. Direct analysis is, on the other hand, much less time-consuming and requires less sample.     

Supramolecular Templating of Mesopores in Phase-Separating Silica Sol-Gels Incorporated with Cationic Surfactant

Silica gels with hierarchical macropores and mesopores have been prepared by inducing phase separation in the alkoxide-based sol-gel system with an addition of alkyltrimethylammonium salt. Narrowly distributed mesopores were observed in the heat-treated gel samples possibly as a result of supramolecular templating of silica oligomers in the reacting solution. The ionic attractive interaction and hydrophobicity of the attached alkyl group cooperatively determined the phase separation tendency. No indication of long-range order of the mesopores was obtained.     

乙醇 /水混合溶剂沉淀制备纳米BaF2及粒径控制

采用水和乙醇混合溶剂沉淀的方法制备了不同粒径的BaF₂纳米粉体。用XRD、TEM和FSEM表征了粉体的粒径和形貌。研究了陈化时间、水和乙醇的体积比对BaF₂纳米粉体的粒径和形貌的影响。结果表明，随混合溶剂中乙醇含量升高，沉淀粒径减小。BaF₂沉淀粒径的倒数和溶剂介电常数的倒数呈线性关系，据此关系可以控制BaF₂纳米粉体的粒径。     

Sodium hexadecanoate micellar aggregation number

The diffusion coefficient of sodium hexadecanoate micelles was studied by polarography at 63°C, and the size and aggregation number of the micelles was computed. At concentrations above 0.01 mol·L^–1 rodlike micelles exist, which become flexible at 0.040 mol·L^–1 and entangle at 0.043 mol·L^–1     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

Facts and artifacts about aromatic stability estimation

The stability of a set of 105 five-membered π-electron systems (involving aromatic, non-aromatic and anti-aromatic species) was evaluated using six isodesmic reactions of which two belong to the subclass of homodesmotic reactions, which are based on cyclic and acyclic reference systems. We demonstrate that the ‘Resonance Energies’ derived from isodesmotic schemes have obvious flaws and do not correct or cancel other contributions to the energy, such as the changes of hybridization, homoconjugation of heterosubstituted cyclopentadienes, conjugative interactions of CC or CX (X=N or P) with a π or pseudo π orbital at Y (Y=O, S, NH, PH), strain, etc. as effectively as possible. Likewise, ‘aromatic stabilization energies (ASE)’ derived from homodesmotic schemes based on the acyclic reference compounds do not give satisfactory results. We strongly recommend that only cyclic reference compounds should be used for ASE and other aromaticity evaluations. The analysis is based on ab initio optimized geometries at B3LYP/6-311+G^∗∗.     

Monte‐Carlo simulation of spatial distribution of characteristic x‐rays in multi‐film targets: source size of Al Kα x‐rays in W/Al film targets

A Monte‐Carlo simulation approach has been applied to describe the spatial distribution of characteristic x‐rays in W/Al film targets of different combinations of film thicknesses for the optimal design of a small‐sized x‐ray source having a high x‐ray intensity. The result has led to optimal combinations of W and Al film targets for 100 kV electrons, e.g. W(1 µm)/Al(20 µm), W(3 µm)/Al(15 µm) and W(5 µm)/Al(8 µm). These Al/W targets could be used as x‐ray sources for a medical instrument currently under development. Copyright © 2004 John Wiley & Sons, Ltd.