Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Intermolecular-medium and intramolecular-weak hydrogen bonding chains in the crystals of chiral trifluoromethylated amino alcohols

A structural feature of hydrogen bonding chains found in the crystals of trifluoromethylated amino alcohols is reported. Hydrogen bondings of 3-(N,N-dialkylamino)-1,1,1-trifluoro-2-propanols construct chiral spiral hydrogen bonding chains. Lone pairs on the nitrogen atoms of the amino alcohols participate in two hydrogen bondings. Detailed structural analysis of the hydrogen bonds of the 3-(N,N-dimethylamino)-1,1,1-trifluoro-2-propanol suggested that the chain built up with alternating intermolecular-medium and intramolecular-weak hydrogen bonds. The medium intermolecular hydrogen bond, which transfers a proton from the hydroxy group to the amino nitrogen, would make a tentative zwitterionic form of the molecule. Then, electrostatic attraction between the charges in the zwitterion centers induced a weak intramolecular hydrogen bond.     

Performance characteristics of suspended particulate reagent-iminodiacetate as a binding agent for diffusive gradients in thin films

The performance characteristics of an alternative binding agent, suspended particulate reagent-iminodiacetate (SPR-IDA), for use with DGT methodology were investigated. The parameters investigated during this study included gel hydration, blank levels, elution factor (f_e), capacity, the effects of pH on the binding of trace metals by DGT. The novel application of this resin for use as a quantitative standard for laser ablation ICP-MS was also evaluated. To further constrain the results for the SPR-IDA binding agent, parallel experiments were performed using resin gel containing Chelex 100, which has been widely reported in the literature. Hydration results showed that the SPR-IDA resin gel reached a stable dimension and weight within ∼30 min and was dimensionally stable for ≤6 months. The measured DGT blanks for the SPR-IDA resin were 0.0023, 0.15, 0.21, 0.0033 and 0.011 ng disc⁻¹ for Co, Ni, Cu, Cd and Pb, respectively. The elution factor differed for the two resin types with the Chelex 100 recoveries slightly lower than previous reports and the SPR-IDA resin showing on average ∼5-9% better recoveries than DGT containing Chelex 100. The measured capacity of DGT discs containing the SPR-IDA binding agent was 0.26 mg Cd, similar to the calculated value of 0.29 mg Cd, indicating the entire resin layer was available for metal uptake.Both resin types performed equally well when deployed in 1 mM NaNO₃ solutions with DGT measurements of ∼100% of direct solution measurements for Co, Ni and Cd. However, DGT measurements of Cu and Pb systematically decreased with increasing solution pH down to ∼50% of solution values at pH 8.0, due to artifacts resulting from colloid formation during the addition of the metals. This was remedied by adding the metals as dilute salt standards and addition of Mg(NO₃)₂ to eliminate adsorption to the container walls. In the latter experiments, DGT measured concentrations of Co, Ni, Cu, Cd and Pb were in agreement with solution concentrations. Deployment of DGT in solutions with increasing concentrations of trace metals yielded linear results, suggesting that quantitative analysis using simplified laser ablation techniques should be possible using this newly characterized SPR-IDA resin gel.     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and CO groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

单分散磁性P(St/BA/MAA)微球的制备

在共沉淀法合成超细磁流体的基础上 ,以苯乙烯 (St)、丙烯酸丁酯 (BA)和甲基丙烯酸 (MAA)为共聚单体 ,在不同的介质体系中采用无皂乳液聚合法制备了单分散 ,粒径范围为 80～ 2 30nm的磁性P(St BA MAA)微球 .详细探讨了介质极性、磁流体中表面活性剂含量对磁性高分子微球粒径和单分散性的影响 .实验结果表明 ,在一定范围内随介质极性降低 ,磁性高分子微球的单分散性提高 ,随表面活性剂用量增加 ,单分散性变差 .总体来看 ,磁性高分子微球的单分散性与其表面静电斥力密切相关 ,过大或过小的静电斥力均会导致磁性高分子微球单分散性的降低 .     

Effect of pH on the Encapsulation of the Salicylic Acid / Salicylate System by Hydroxypropyl-β-Cyclodextrin at 25 °c. A Fluorescence Enhancement Study in Aqueous Solutions

The encapsulation of the acid/base conjugated system salicylic acid(HSA)/salicylate (SA^-) by hydroxypropyl--cyclodextrin (HPBCD) has beenstudied through fluorescence emission enhancement measurements in aqueoussolutions at 25 °C. With the aim of analyzing the crucial importance ofa proper and cautious choice of the pH of the medium (i.e. choice of thebuffer), the study has been carried out at pH = 1, 2, 4 and 7. Since the pK_a of the HSA/SA^- system is 2.95 at 25 °C, the presence of the protonated(HSA) and non-protonated (SA^-) forms suitable for inclusion by cyclodextrinvary appreciably within the different pH conditions: 99% HSA,1% SA^- at pH = 1, 90% HSA, 10% SA^- at pH = 2,10% HSA, 90% SA^- at pH = 4, and 0% HSA,100% SA- at pH =7. The association constants K CD : HSA and K _{CD: SA-} have been determined in all cases by using a nonlinear regressionanalysis of the experimental data at three different ^em. The effectof the pH of the medium on all the equilibria involved as well as in the Kvalues is fully discussed. The 8-anilino-1-naphthalene sulfonate (ANS) +-cyclodextrin (-CD) system, widely reported in literature, hasinitially been studied to check the experimental protocol and the numericalmethod.     

The influence of pH on phosphatidylcholine monolayer at the air/aqueous solution interface

The measurements of the interfacial tension at the air/aqueous subphase interface as the function of pH were performed. The interfacial tension of the air–aqueous subphase interface was divided into contributions of individuals. A simple model of the influence of pH on the phosphatidylcholine monolayer at the air/hydrophobic chains of phosphatidylcholine is presented. The contributions of additive phosphatidylcholine forms (both interfacial tension values and molecular area values) depend on pH. The interfacial tension values and the molecular areas values for LH⁺, LOH⁻ forms of phosphatidylcholine were calculated. The assumed model was verified experimentally.     

pH对毛细管电泳分离多肽的影响

设计了一个针对高年级本科生的毛细管电泳分离实验，用以研究pH对生物小分子多肽分离的影响。5种多肽包括Bradykinin、[Hyp3]-bradykinin、Angiotensin I、Leucine Enkephalin和[Met5]-Enkaphalin，被用于毛细管电泳的分离实验。研究了毛细管电泳生物分析实验中最重要的2个因素即电渗流和样品吸附随pH的变化以及对于分离的影响。在pH=10的条件下，酸性多肽几乎没有吸附，少量的碱性多肽有吸附。在pH=6的条件下，碱性多肽具有非常强的吸附从而导致非常差的分离效果，在pH=2.3的条件下，5种多肽都能被很好地分离，由于多肽此时都带有正电荷因此几乎没有吸附。而在此pH，电渗流消失。对具有一定分析化学基础理论知识的学生而言，这是一个非常好的生物分析实验，有助于学生充分理解相关环境因素对仪器分析的重要影响。     

Quantitative determination of sodium stearyl fumarate in a tablet formulation from continuous manufacturing using a high-pH reversed-phase HPLC method

This study demonstrates the first use of a reversed-phase (RP) high-performance liquid chromatography method with a high-pH buffer for the analysis of sodium stearyl fumarate (SSF) from a tablet formulation. After examining the retention time and peak shape using various buffer concentrations, buffer pH, and RP stationary phases, an optimized method was established using the XBridge® BEH C18 at high pH. This column was further evaluated for method specificity, accuracy, precision, linearity, stability, and sensitivity. Finally, the method was successfully used as a convenient and robust analytical procedure to accurately quantitate SSF in stratified tablets from a continuous manufacturing process to confirm the excipient uniformity throughout the process.     

A novel design of membrane mirror with small deformation and imaging performance analysis in infrared system

A method of diminishing the shape error of membrane mirror is proposed in this paper. The inner inflating pressure is considerably decreased by adopting the pre-shaped membrane. Small deformation of the membrane mirror with greatly reduced shape error is sequentially achieved. Primarily a finite element model of the above pre-shaped membrane is built on the basis of its mechanical properties. Then accurate shape data under different pressures can be acquired by iteratively calculating the node displacements of the model. Shape data are applicable to build up deformed reflecting surfaces for the simulative analysis in ZEMAX. Finally, ground-based imaging experiments of 4-bar targets and nature scene are conducted. Experiment results indicate that the MTF of the infrared system can reach to 0.3 at a high spatial resolution of 10l p/mm, and texture details of the nature scene are well-presented. The method can provide theoretical basis and technical support for the applications in lightweight optical components with ultra-large apertures.