Fabrication of tunable colloid crystals from amine-terminated polyamidoamine dendrimers

A pH-responsive colloidal crystal was assembled using core-shell composite spheres, poly(styrene-methyl methacrylate-acrylic acid) (P(St-MMA-AA)) spheres covered by generation 4 amine-terminated polyamidoamine dendrimers. The light reflection of the colloidal crystal film can be tuned at different pH due to different protonation level of the dendrimers. The method shows a facile way to fabricate diffraction-based chemical and biological sensors by exploiting the effect of photonic crystal cooperated with tunable nanoparticles.     

流通池介质交换差示脉冲阳极溶出伏安法用于多元素重叠峰的分离及其同时测定

本文用流通池介质交换差示脉冲阳极溶出伏安法在盐酸介质中富集,而以碳酸钠-碳酸氢钠缓冲溶液为溶出介质,有效地分离了酸性介质中Cu(Ⅱ)、Sb(Ⅲ)、Pb(Ⅱ)、Tl(Ⅰ)、Cd(Ⅱ)、In(Ⅲ)的重叠溶出峰,实现了多离子的同时测定。     

溶液pH值对聚邻甲苯胺电化学性质的影响

本文报道了溶液pH值对聚邻甲本胺电化学性质的影响。研究结果表明,电化学合成的聚邻甲苯胺的循环伏安曲线、氧化电位、膜的颜色、充放电容量、紫外可见光谱以及氧化还原活性都受到溶液pH的影响。在低pH值的溶液中,随着扫描电位的变化,聚邻甲苯胺膜的颜色可逆地变化,而在pH4.13的溶液中进行扫描时,膜的颜色不变化,电化学活性也消失。     

温度及pH敏感的树枝状高分子衍生物合成及药物控制释放研究

对合成的系列聚酰胺-胺型(PAMAM)树枝状高分子进行端基的羟基化和氯乙酰化两步修饰,使PAMAM最外层接上烷基氯.以修饰产物为引发剂,通过原子转移自由基引发甲基丙烯酸N,N-二甲氨基乙酯(DMAEMA)聚合得到树枝状PAMAM高分子衍生物,并对其结构用FTIR、1H-NMR和粒径分析进行了表征.紫外可见分光光度仪测定证实此高分子具有温度及pH敏感性.通过对小分子药物控制释放研究表明,此树枝状高分子衍生物通过环境pH值可有效地控制小分子药物的释放.     

葡萄糖和水混合溶液多组分电解质热力学 Ⅱ.HCl-NaCl-d-Glucose-H_2O体系(5—45℃)

本文续前报在恒定溶液总离子强度I=1.00mol·kg~(-1),改变葡萄糖在混合溶液中的质量百分数x=5%、15%和20%的条件下,应用电动势法测定了无液接界电池(A)和电池(B)的电动势: Pt,H_2(1.013×10~5Pa)|HCl(m),d-Glucose(x),H_2O(1-x)|AgCl-Ag (A) Pt,H_2(1.013×10~5Pa)|HCl(m_A),NaCl(m_B),d-Glucose(x),H_2O(1-x)|AgCl-Ag(B) 其中x代表葡萄糖在水中的质量百分数,m_A和m_B分别是HCl和NaCl在混合溶液中的质量摩浓度。利用电池(A)的电动势数据得到了AgCl-Ag电极在d-Glucose-H_2O混合溶液中的标准电极电势Φ_m~0,讨论了HCl的迁移性质,利用电池(B)的电动势数据,确定了HCl在HCl-NaCl-d-Glucse-H_2O体系中的活度系数γ_A,实验结果表明:在恒定总离子强度下,HCl的活度系数服从Harned规则。HCl的迁移自由能与葡萄糖的质量百分数x成线性关系。计算了HCl     

pH,Definition and measurement at high temperatures

In this review paper, the NBS scale and its limitations are briefly discussed. The magnitude of liquid junction potentials and some calculated values are presented. The use of a molality scale for hydrogen electrode concentration cells at high temperatures is described, and results from measurements on ionization equilibria are summarized. Use of this scale is also recommended for certain circumstances with cells without liquid junction. As an alternative activity scale, use of the Pitzer ion-interaction treatment for ions is recommended for special cases. Finally, reference data are presented for _±HCl in HCl(aq) to 350°C and (HCl+NaCl)(aq) to 200°C that were derived by use of the Pitzer ion-interaction treatment.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

This paper studied the effect of pH and the viscosity of feed solution on the mass transfer in two different specifications of hydrophobic hollow fiber membrane contactors. Experimental results showed that the pH of the feed had a significant effect on the rate of mass transfer, the flux and the removal efficiency of easily ionized volatile compounds (VCs), such as ammonia. In unbuffered feed solutions, both the resistance of membrane and the resistance of feed side were affected by the pH of feed and both of them had contributions to the overall mass transfer. A model, , was proposed to predict the effect of pH and gave good agreement with the experimental data for the two contactors. The relationship between viscosities and the mass transfer coefficient could be described by . Based on our experiments, the change of the viscosities in the concentration range of ammonia from 50 to 10,000 mg l⁻¹ caused about 3–4% variation of the mass transfer coefficients. Moreover, it may be more suitable to use the equilibrium concentrations of volatile species instead of the total concentrations of VCs to estimate mass transfer coefficients, removal efficiency and flux. Experimental results also revealed that the choice of the pH of feed might be one of the most crucial factors for removing easily ionized VCs, such as ammonia, from water and wastewater.     

Second Dissociation Constants of 4-[N-morpholino]butanesulfonic Acid and N-[2-hydroxyethyl]piperazine-N′-4-butanesulfonic Acid from 5 to 55°C

The values of the second dissociation constant, pK ₂, for the dissociation of the NH⁺ charge center of the zwitterionic buffer compounds 4-(N-morpholino)butanesulfonic acid (MOBS), and N-(2-hydroxyethyl)piperazine-N-4-butanesulfonic acid (HEPBS) have been determined from 5 to 55°C, including, 37°C at intervals of 5°C. The electromotive-force (emf) measurements have been made utilizing hydrogen electrodes and silver–silver chloride electrodes. The value of pK ₂ for MOBS was found to be 7.702 ± 0.0005, and 8.284 ± 0.0004 for HEPBS, at 25°C, respectively. The related thermodynamic quantities, G ^o, H ^o, S ^o, and C _p ^o for the dissociation processes of MOBS and HEPBS have been derived from the temperature coefficients of pK ₂. Both the MOBS and HEPBS buffer materials are useful as primary pH standards for the control of pH 7.3 to 8.6 in the region close to that of physiological fluids.     

Thermodynamics of the dissociation of 2-aminopyridinium ion in synthetic seawater and a standard for pH in marine systems

Buffer solutions composed of 2-aminopyridinium chloride and 2-aminopyridine in synthetic seawater are useful as a supplement to buffers of Tris (pH 8.2) and Bis (pH 8.8) in standardizing measurements of hydrogen ion concentration (pm _H or pH(SWS)) in oceanography. The dissociation constant of 2-amino-pyridinium ion over the range of salinities (S) from 30 to 40 has now been determined from the emf of cells without liquid junction at eight temperatures (T) from 278.15 to 313.15 K. The results fit the equation pK=2498.31/T–15.3274+2.4050 lnT+S(0.012928–2.9417×10^–5T) with a standard deviation of 0.0023. Thermodynamic constants for the dissociation process and standard reference values of pm _H and pH(SWS) were derived from the data. The pm _H of the buffer consisting of 2-aminopyridinium chloride and 2-aminopyridine (each 0.04 molal) in synthetic seawater of salinity 35 varies from 7.356 at 278.15 K to 6.601 at 313.15 K.