Method Development for the Speciation of Chromium in River and Industrial Wastewater Using GFAAS

A simple, sensitive and inexpensive method for the speciation of Cr(VI) and Cr(III) in river and industrial wastewater was developed, optimized and validated. Samples were collected, filtered and then chromium species were determined in the filtrate. In the filtrate, total Cr was determined directly by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). A portion of the filtered sample was buffered to pH 6.4, extracted with Amberlite LA-2/MIBK and finally Cr(VI) was determined in the organic extract and Cr(III) in the aqueous phase using GFAAS. The method was evaluated by analysis of the certified reference material, CRM 544, and good accuracy was obtained. The limit of detection for Cr(VI) and Cr(tot)/Cr(III) was found to be 0.30 and 0.08 µg L⁻¹, respectively, and a precision expressed as relative standard deviation of better than 11% was achieved for nine replicates. A number of water samples from the Tinishu Akaki River, Ethiopia, and wastewater samples from a chemical plant in Germany, were analysed. In addition to the GFAAS method, Cr(tot) was also determined using ICP-MS (in CRM 544, lyophilized water, and Tinishu Akaki River water samples) and Cr(tot) and Cr(VI) using UV-VIS spectrophotometry (in CRM 544 and industrial wastewater samples). Good agreement between the different methods was found.     

Polynuclear manganese grids and clusters—A magnetic perspective

High nuclearity paramagnetic, spin-coupled transition metal clusters and grids are fascinating chemists and physicists partly because of their structural beauty, and the challenge of creating them, but also because of their novel physical properties. Magnetic interactions between the spin centers are a primary focus. This review will examine a selection of Mn(II) polynuclear grids and clusters, with nuclearities in the range Mn₄ to Mn₉. Theoretical treatments of the magnetic properties are discussed, and approaches to solving the exchange problem for ‘large’ spin systems related to computational difficulties. A freely available software package (MAGMUN4.1) is presented as a means of dealing simply with spin-coupled clusters in general, and symmetry reduction methods are discussed briefly as a means of dealing with ‘large’ spin systems.     

D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

Synthesis of 3-amino-5-nitrobenzaldehyde oxime and its conversion into 3,4-bis(3-amino-5-nitrophenyl)furoxan and isomeric 3(4)-(3-amino-5-nitrophenyl)-4(3)-nitrofuroxans

The oxime of the hitherto unknown 3-amino-5-nitrobenzaldehyde was synthesized by the reaction of 3-amino-5-nitrobenzaldehyde phenylhydrazone with excess of (NH₂OH)₂·H₂SO₄. The oxime obtained was used as the starting compound for the synthesis of novel diaryl- and arylnitrofuroxans. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2232–2235, December, 1997.     

Oxygen diffusion in SrCe<Subscript>0.95</Subscript>Yb<Subscript>0.05</Subscript>O<Subscript>3−δ</Subscript>

¹⁸O/¹⁶O isotope exchange depth profiling (IEDP) combined with secondary ion mass spectrometry (SIMS) has been used to measure the oxygen tracer diffusivity of SrCe_0.95Yb_0.05O_3– between 800 °C and 500 °C at a nominal pressure of 200 mbar. The values of D* (oxygen tracer diffusion coefficient) and k (surface exchange coefficient) increase steadily with increasing temperature, and the activation energies are 1.13 eV and 0.96 eV, respectively. Oxygen ion conductivities have been calculated using the Nernst–Einstein equation. The transport number for oxide ions at 769 °C, the highest temperature studied, is only ~0.05. Moreover, SrCe_0.95Yb_0.05O_3– has been studied using impedance spectroscopy under dry O₂, wet O₂ and wet H₂ (N₂/10% H₂) atmospheres, over the range 850–300 °C. Above ~550 °C, SrCe_0.95Yb_0.05O_3– shows higher conductivity in dry O₂ than in wet O₂ or wet H₂; below that temperature the results obtained for the three atmospheres are comparable. Dry O₂ shows the highest activation energy (0.77 eV); the activation energies for wet O₂ and wet H₂ are identical (0.62 eV).Abbreviations HTPC high-temperature proton conductor - IEDP isotope exchange depth profiling - SIMS secondary ion mass spectrometryPresented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

d,h-m̈-Alkoxoalkylphosphonato-e-m̈-alkoxo-f-m̈-oxo-bis[trichloroantimon(V)]-Verbindungen

d,h-m?-Alkoxoalkylphosphonato-e-m?-alkoxo-f-m?-oxo-bis[trichloroantimony(V)] Compounds The binuclear antimony(V) complexes Cl₃Sb(O)[R³(R¹O)PO₂](OR²)SbCl₃ 1 to 7 with R¹, R² and R³ = Me or Et in solution slowly exchanges the R² groups between the equatorial oxygen atoms of the Sb₂O₂ ring. The SbO(3)PO(3)Sb ringsystem makes rapid pseudorotation. The resulting isomeres are detected by nmr spectroscopy.     

Ce0.6Zr0.35Y0.05O2和Pr0.6Zr0.35Y0.05O2催化剂表面上CO氧化和18O-16O交换反应的研究

测定了在Ce0.6Zr0.4O2,Ce0.6Zr0.35Y0.05O2,Pr0.6Zr0.4O2和Pr0.6Zr0.35Y0.05O2 (分别表示为CZ,CYZ,PZ和PYZ)样品表面上的CO氧化反应和18O-16O 同位素交换反应.结果表明: 在CZ和PZ系列固熔中掺杂Y3 离子可以改善晶格氧的迁移速度;PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.其原因是将Y3 掺杂到Ce0.6Zr0.4O2 或Pr0.6Zr0.4O2晶格中,增加了样品的氧空位浓度,从而提高了晶格氧的迁移性质,而PrOx比CeO2具有更低温度的氧化还原性质,因此PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.     

离子交换-双氧水氧化法制备纳米CeO2晶体

以99.995% Ce(NO₃)₃和强碱性阴离子交换树脂为原料，采用离子交换-双氧水氧化法合成制备出纳米CeO₂晶体。并就离子交换反应中的Ce³⁺浓度、树脂加入速度和离子交换温度及H₂O₂加入速度等条件对CeO₂粒径的影响进行了探讨，得出了离子交换-双氧水氧化法制备纳米CeO₂晶体的最佳工艺条件。FTIR、TEM分析表明，离子交换法无需对合成的Ce(OH)₃溶胶进行洗涤即可去除NO₃^-、CO₃^2-等阴离子杂质，并用H₂O₂将该溶胶氧化，经真空干燥可制得粒径分布均匀，平均晶粒尺寸约3 nm，高纯度的CeO₂粉体。     

Magnetic Orbitals and Mechanisms of Exchange I. Direct Exchange

Summary. The problem of direct exchange is examined in the simplest cases (formal coupling of two electrons initially isolated and hydrogen molecule). Then we consider the general case of a solid characterized by weak overlaps between the atomic orbitals of first-nearest neighbours so that the involved electrons are quasi-localized. We recall the physical origin of spin-orbit coupling. Its influence on direct exchange allows one to revisit Hunds rules and to express phenomenological Hamiltonians describing anisotropic couplings as well as the antisymmetrical Dzialoshinski-Moriya coupling.     

Analyzing Anisotropic Exchange in a Pentanuclear Os2Ni3 Complex

Spin Hamiltonian parameters of a pentanuclear Os Ni cyanometallate complex are derived from ab initio wave function based calculations, namely valence-type configuration interaction calculations with a complete active space including spin-orbit interaction (CASOCI) in a single-step procedure. While fits of experimental data performed so far could reproduce the data but the resulting parameters were not satisfactory, the parameters derived in the present work reproduce experimental data and at the same time have a reasonable size. The one-centre parameters (local matrices and single-ion zero field splitting tensors) are within an expected range, the anisotropic exchange parameters obtained in this work for an Os−Ni pair are not exceedingly large but determine the low-T part of the experimental χT curve. Exchange interactions (both isotropic and anisotropic) obtained from CASOCI have to be scaled by a factor of 2.5 to obtain agreement with experiment, a known deficiency of such types of calculation. After scaling the parameters, the isotropic Os−Ni exchange coupling constant is cm⁻¹ and the D parameter of the (nearly axial) anisotropic Os−Ni exchange is ⁻¹, so anisotropic exchange is larger in absolute size than isotropic exchange. The negative value of the isotropic J (indicating antiferromagnetic coupling) seemingly contradicts the large-temperature behaviour of the temperature dependent susceptibility curve, but this is caused by the negative g value of the Os centres. This negative g value is a universal feature of a pseudo-octahedral coordination with configuration and strong spin-orbit interaction. Knowing the size of these exchange interactions is important because Os(CN) is a versatile building block for the synthesis of / magnetic materials.