Preparation and characterization of aliphatic/aromatic copolyesters based on 1,4-cyclohexanedicarboxylic acid

A series of biodegradable aliphatic/aromatic copolyesters, poly(butylene terephthalate)-co-poly(butylene cyclohexanedicarboxylate)-b-poly(ethylene glycol) (PTCG), were prepared by a two-step melt polycondensation method and characterized by means of GPC, FTIR, NMR, DSC, TGA, etc. The effects of aliphatic ester content on the physical, mechanical and thermal properties, as well as in vitro and in vivo degradation behaviors were investigated. The decrease in mechanical strength was observed with an increase in poly(butylene cyclohexanedicarboxylate) (PBC) molar fraction. DSC results showed one melting point and two glass transition temperatures in all samples, and the melting temperature was found to go down gradually as more cyclohexanedicarboxylic acid (CHDA) was added. During the in vitro and in vivo degradation processes, erosion of the surface was dominant as evidenced by scanning electron microscopic observations. The copolyesters containing many CHDA units were featured by the higher water uptake and faster degradation due to much richer amorphous phase within them.     

Proton Relaxometry of Long-Lived Spin Order

A study of long-lived spin order in chlorothiophene carboxylates at both high and low magnetic fields is presented. Careful sample preparation (removal of dissolved oxygen in solution, chelating of paramagnetic impurities, reduction of convection) allows one to obtain very long-lived singlet order of the two coupled protons in chlorothiophene derivatives, having lifetimes of about 130 s in D₂O and 240 s in deuterated methanol, which are much longer than the T₁-relaxation times (18 and 30 s, respectively, at a field =9.4 T). In protonated solvents the relaxation times become shorter, but the lifetime is still substantially longer than . In addition, long-lived coherences are shown to have lifetimes as long as 30 s. Thiophene derivatives can be used as molecular tags to study slow transport, slow dynamics and slow chemical processes, as has been shown in recent years.     

Synthesis and characterization of ran-copoly (p-phenylene sulfide sulfone/ketone)s

Random copoly(p-phenylene sulfide sulfone/ketone)s (PPSS/K) are prepared in high yield by the polycondensation of sodium hydrosulfide (NaSH) with bis(4-chlorophenyl) sulfone (BCPS) and 4,4′-dichlorobenzophenone (DCBP). The polymerization is conducted between 200–220°C, depending on the composition of the copolymer, and in the presence of water without any detrimental effects to the molecular weight. The copolymers with sulfone/ketone mole ratios (S : K) > 25 : 75 are amorphous, while the copolymers with S : K ratios ≤ 25 : 75 are crystalline. These materials form tough, creaseable films and exhibit a linear increase in the glass transition temperature with increasing sulfone content. Sulfuric acid solutions of the copolymers are dark orange to red and display an increasing λ_max in the uv-visible spectra as the S:K ratio of the copolymers decreases. © 1994 John Wiley & Sons, Inc.     

纳米晶复合Nd2Fe14B/α-Fe合金制备与磁性能的研究

采用熔体快淬及晶化处理工艺制备Nd11Fe71Co8V1.5Cr1B7.5纳米晶合金。经21m·s-1快淬及640℃ 4min晶化处理后,制成的粘结磁体的磁性能最佳,为:Br=0.64T,JHc=903.5kA·m-1,(BH)max=71kJ·m-3。添加Cr元素可提高内禀矫顽力,从而提高最大磁能积。     

Polyparametric modification equation for estimating thermodynamic properties of energetic nitro compounds

Calculation methods, based on hybrid density-functional theory with the basis sets of B3LYP/ 6-311+G (2d, p)//B3LYP/6-31G(d, p)and B3LYP/6-31+G(d)//B3LYP/6-31G(d, p), were applied to determine the thermodynamic characteristics of various energetic nitro compounds. A parametric modification equation and the least-squares approach were used to identify 21 of the energetic research compounds. The atomization energies of these 21 compounds have an average relative error of 0.21–0.25% of the experimental values. The enthalpy (H _f) and the Gibbs energy (G _f) of formation have mean absolute errors of 10.8–11.4 kJ/ mol (2.6–2.7 kcal/mol) and 10.0–10.3 kJ/mol (2.4 kcal/ mol), respectively. The enthalpy and the Gibbs energy of formation obtained exceed those in the literature obtained by semiempirical calculations. The calibrated least-squares parameters and parametric equations were used to predict H _f and G _f for the five newly developed energetic nitro compounds for further applications.Acknowledgements. The authors would like to thank the National Science Council of the Republic of China for financial support of this work under grant no. NSC-91-2113-M-014-003. The National Center for High-Performance Computing providing the computation facility is also acknowledged.     

Properties of block and graft copolymers of polybutadiene with small complexed poly(4-vinylpyridine) segments

Various diblocks, triblocks and a graft copolymer of butadiene with 4-vinylpyridine short blocks have been prepared. They were complexed with ZnCl₂ to give ionomer-like materials. For all copolymers, the T_g of the elastomeric block (?84°C to ?91°C) was unchanged by complexation. For all diblocks and triblocks with short blocks (DP _n ～ 3) the storage modulus was only slightly increased by comparison with uncomplexed materials. For the graft copolymer even with short blocks the material is less sensitive to temperature after complexation. For triblocks, when the DP _n of the vinylpyridine blocks was high enough (15 units), complexes were associated in multiplets of large size and the elastomeric properties were retained up to 200°C.     

STUDIES ON TUNG OIL COATED REGENERATED CELLULOSE FILMS WITH WATERRESISTANCE

Regenerated cellulose films with water-resistance were obtained by an improved method ofpreparing cellulose cuoxam solution from pulps of agricultural wastes (linters, wheat straw, reedand Bamao). Experimental results showed that the mechanical properties of both the dry. and wetfilms were excellent. Data from IR, SEM and tensile strength measurements implied that thesignificant improvement of water-resistance of the films was due to the cohesion between the thinTung oil covers with hydrophobicity and the regenerated cellulose films. The films werecompletely biodegraded after being buried in soil for 100 days. The transmittance of the filmsderived from linter and reed in visible band range were 80-90%.     

Optical and transport phenomena in CdO:La films prepared by sol-gel method

A series of lightly La-doped CdO thin films (1%, 5%, and 7%) have been prepared by a spin coater sol-gel technique on amorphous glass and crystalline Si substrates. Those prepared films were studied by X-ray diffraction (XRD), UV-VIS-NIR absorption spectroscopy, and dc-electrical measurements. The investigation shows that La doping grows slightly the CdO lattice parameter and decreases the intrinsic energygap from 2.1 eV to 1.7 eV. The optical properties were easily explained in the framework of classical Drude theory and thus all the corresponding parameters were determined. The electrical behaviour of the samples shows that they are degenerate semiconductors until the atomic percentage of the La dopant was 7% then the sample was converted into a non-degenerate semiconductor. Generally, it was observed that the conductivity and mobility of the carriers were decreased by increasing the La content in the CdO film samples.     

Rheology of polystyrene solutions around the coil overlapping concentration: A phenomenological description of stresses in simple shear flow

Linear viscoelasticity behavior is described with the sum of two terms for polystyrene solutions in tricresyl phosphate around the coil overlapping concentration (K. Osaki, T. Inoue, & T. Uematsu, J Polym Sci Part B: Polym Phys 2001, 39, 211). One is a Rouse–Zimm (RZ) term represented by the Zimm theory with arbitrarily chosen values of the hydrodynamic interaction parameter and the longest relaxation time (τ_RZ). The other (the L term) consists of a relaxation mode with a single relaxation time (τ_L > τ_RZ) and a high‐frequency limiting modulus proportional to the square of the concentration. In this study, we describe the viscosity (η) and first normal stress coefficient (Ψ₁) in steady shear with simple formulas. The stress due to the L term is assumed to be given by a Kaye, Bernstein, Kearsley, and Zapas (K‐BKZ) equation with the damping function h(γ) = (1 + 0.2γ²)^?1/2, where γ is the magnitude of shear. Contributions to η and Ψ₁ from the RZ term are derived from the RZ model, in which the relaxation time in steady flow is given by τ_st = τ + (τ_RZ ? τ)/(1 + 0.35τ_RZ γ˙) instead of τ_RZ. Here, γ˙ is the rate of shear, and τ is the τ_RZ value at the infinite dilution limit. η and Ψ₁ at various concentrations for two polystyrene samples (with molecular weights of 2890 and 8420 kg mol^?1) are well described with parameters derived from dynamic viscoelasticity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1038–1045, 2002     

Structure and Magnetic Properties of Nickel–Zinc Ferrite Nanoparticles Prepared by Glass Crystallization Method

Summary. The magnetic and microstructure properties of Fe₂O₃–0.4NiO–0.6ZnO–B₂O₃ glass system, which was subjected to heat treatment in order to induce a magnetic crystalline phase (Ni_0.4Zn_0.6-Fe₂O₄ crystals) within the glass matrix, were investigated. DSC measurement was performed to reveal the crystallization temperature of the prepared glass sample. The obtained samples, produced by heat treatment at 765°C for various times (1, 1.5, 2, and 3 h), were characterized by X-ray diffraction, IR spectra, transmission electron microscopy, and vibrating sample magnetometer. The results indicated the formation of spinel Ni–Zn ferrite in the glass matrix. Particles of the ferrite with sizes ranging from 28 to 120 nm depending on the sintering time were observed. The coercivity values for different heat-treatment samples were found to be in the range from 15.2 to 100 Oe. The combination of zinc content and sintering times leads to samples with saturation magnetization ranging from 12.25 to 17.82 emu/g.