Zur Synthese und Struktur von K3N

Synthesis and Structure of K₃N Two phases in the binary system K/N have been obtained via co‐deposition of potassium and nitrogen onto polished sapphire at 77 K and subsequent heating to room temperature. The powder diffraction pattern of one of these phases can be satisfactorily interpreted by assuming the composition K₃N, and the anti‐TiI₃ structure‐type, which is also adopted by Cs₃O. The resulting hexagonal lattice constants are: a = 779.8(2), c = 759.2(9) pm, Z = 2, P6₃/mcm. Comparison with possible structures of K₃N generated by computational methods and refined at Hartree‐Fock‐ and DFT level, reveals that the energetically most favoured structure has not formed (presumable Li₃P‐type), but instead one of those with very low density. In this respect, the findings for K₃N are analogous to the results on Na₃N. The thermal evolution of the deposited starting mixture has been investigated. Hexagonal K₃N transforms to another K/N phase at 233 K. Its XRD can be fully indexed resulting in an orthorhombic cell a = 1163, b = 596, c = 718 pm. Decomposition leaving elemental potassium as the only residue occurs at 263 K.     

Investigation of the effect of CdCl2 processing on vacuum deposited CdS/CdTe thin film solar cells by DLTS

Thin film CdS/CdTe solar cells have been prepared by conventional vacuum deposition technique. Deep level transient spectroscopy (DLTS), temperature and frequency dependent capacitance-voltage (C-V) measurements were utilised to investigate the performance limiting defect states in the CdTe layer subjected to the post deposition treatments such as CdCl₂-dipping and/or annealing in air. Five hole traps, all of which have been previously reported in the literature, were identified in as-grown CdTe at 0.19, 0.20, 0.22, 0.30 and 0.40 eV above the valence band. A single hole trap level has been evidenced at 0.45 eV after both post deposition heat and CdCl₂ treatments.     

Moment vanishing properties of harmonic Bergman functions

We show that Poisson integrals belonging to certain weighted harmonic Bergman spaces b_δ^p on the upper half-space must have the moment vanishing properties. As an application, we show that b₀^p, p?1, contains a dense subspace whose members have the horizontal moment vanishing properties. Also, we derive related weighted norm inequalities for Poisson integrals. As a consequence, we obtain a characterization for Poisson integrals of continuous functions with compact support in order to belong to b_δ^p.     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.     

Coexisting antiferromagnetism and ferromagnetism in mechanically alloyed Fe-rich Fe–Ni alloys: implications regarding the Fe–Ni phase diagram below 400°C

Fe–Ni alloys below the Invar region with compositions Fe_100−xNi_x (x=21, 24, and 27 at%) were prepared by high-energy ball milling technique (mechanical alloying). The as-milled samples, characterized by X-ray diffraction and Mössbauer spectroscopy, contain a mixture of (BCC) and γ (FCC) phases, whereas the samples annealed at 650°C for 0.5 h show a single γ (FCC) phase displaying a single line Mössbauer spectrum at room temperature (RT). At low temperature, the Mössbauer spectra of annealed Fe₇₆Ni₂₄ and Fe₇₃Ni₂₇ alloys show the existence of a magnetically split pattern together with a broad singlet, which are ascribed to a high-moment ferromagnetic Ni-rich phase and a low-moment Fe-rich phase, respectively. The Fe-rich phase in annealed Fe₇₆Ni₂₄ alloy, which is paramagnetic at RT, undergoes antiferromagnetic ordering at 40 K, estimated from the dramatic line broadening of its spectrum, giving rise to a small hyperfine field (e.g. 2 T at 6 K). The coexistence of these phases is attributed to phase segregation occurring in these alloys as a result of enhanced atomic diffusion. The stability of these alloys towards martensitic (FCC→BCC) transformation at low temperatures is discussed in connection with the Fe–Ni phase diagram below 400°C.     

Absorption measurement of strained SiGe nanostructures deposited by UHV-CVD

In order to obtain a low band gap photocell based on the widely spread silicon technology, e.g. for thermophotovoltaics, SiGe nanostructures can be introduced into a monocrystalline silicon photocell. Beforehand, it is necessary to know the absorption coefficient of the SiGe quantum wells. On a silicon (1 0 0) substrate multiple Si/SiGe quantum well structures were grown by UHV-CVD. The Ge concentration and the well width were used as growth parameters. To obtain significant absorption, the experiment was set up to allow for 200 internal reflections.The total reflection of the light results in a standing electromagnetic wave. The absorption coefficient was obtained from the experimental data taking the geometry and the electric field distribution in the absorbing layer into account. The influence of well width and germanium content on the absorption was investigated with the goal of maximizing the absorption for photons with energies below the band gap energy of silicon. The measurement results are compared with a theoretical model, which takes the band structure of strained SiGe including confinement effects into account.     

A Possibility for Studying Gravitational Properties of the Neutrino

We consider the effect that the gravitational field of a neutrino pulse radiated in the collapse of presupernova nuclei has on the observable optical radiation spectra of atoms at the supernova surface. We show that at the modern level of development of experimental methods, neutrino monitoring supplemented by optical monitoring of supernova candidates provides a unique possibility to check whether the Einstein equivalence principle is satisfied for neutrinos of each of the three types (electron, muon, and tau-lepton) and their antiparticles, to estimate the change of the gravitational potential at the surface of the star at the instant of the neutrino radiation pulse, and to obtain upper limits on the mass values of these neutrinos in a new way.     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

Cellulose-polyamide 66 blends. Part II: Mechanical behavior

Blends of the natural polymer cellulose with a synthetic polymer, polyamide 66, are studied in order to determine if the expected strong interaction between them, due to hydrogen bonds, could improve their mechanical properties such as strength and elongation at break. In a previous work {Part I, J. Polym. Sci. Polym. Phys., 32 , 1437 (1994)}, the preparation technique and the characterization of cellulose-polyamide 66 (PA66) blends were described in detail. Several samples in the composition range between 0 to 70 wt % of PA66 were carefully dried and examined using dynamic mechanical and tensile tests. Based on previous work a new percolation model has been developed. It takes both linear and nonlinear mechanical behaviors into account and allows for the effect of adhesion between material domains. From comparison between experimental and predicted data, it is concluded that a partial miscibility between the amorphous phases of cellulose and PA66 exists and is responsible for a strong adhesion at their interface. Solid-state ¹³C nuclear magnetic resonance has also been used to study these samples and supports the existence of strong interactions between both homopolymers. © 1995 John Wiley & Sons, Inc.