Microwave‐Assisted Rapid and Straightforward Synthesis of Novel 6‐(Aroxymethyl)‐2‐aryl‐6,7‐dihydropyrazolo[5,1‐c][1,4]oxazin‐4‐one Derivatives

A series of novel 6‐(aroxymethyl)‐2‐aryl‐6,7‐dihydropyrazolo[5,1‐c][1,4] oxazin‐4‐one derivatives was synthesized from ethyl 3‐aryl‐1H‐pyrazole‐5‐carboxylate and 2‐aryloxymethylepoxide by a microwave‐assisted, one‐step method in good yields. The microwave‐assisted reaction of ethyl 3‐aryl‐1H‐pyrazole‐5‐carboxylate and 2‐aryloxymethylepoxide proceeds with higher regioselectivity and is more economical and environmentally friendly in contrast to the normal intramolecular esterification route. A tandem mechanism of the reaction was proposed.     

Effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy composite

Recently, several types of nanoparticles are frequently incorporated in reinforced epoxy resin composites. A homogeneous dispersion of these nanoparticles is still a problem. Thermoplastic nanofibrous structures can tackle this dispersion issue. Therefore, this paper investigated the effect of electrospun polyamide 6 nanofibrous structures on the mechanical properties of a glass fibre/epoxy composite. The nanofibres were incorporated in the glass fibre/epoxy composite as stand-alone interlayered structures and directly spun on the glass fibre reinforcement. Both ways of nanofibre incorporation have no negative effect on the impregnation of the epoxy. Moreover, the nanofibres remain well dispersed within the matrix. Incorporation of nanofibres increases the stress at failure in the 0°-direction, the best results are obtained when the nanofibres are directly electrospun onto the glass fibres. Optical microscopic images also demonstrate that nanofibres prevent delamination when a 90° crack reaches a neighbouring 0° ply. Furthermore, mode I tests showed a small improvement when a thin nanofibrous structure is deposited directly onto the glass fibres. When the composites are loaded under 45°, it is proven that, for an identical stress, the glass fibre composite with deposited nanofibres has less cracks than when interlayered nanofibrous structures are incorporated. Generally, it can be concluded that the addition of polyamide 6 nanofibres improves some mechanical characteristics of a glass fibre/epoxy composite.     

Synthesis and liquid crystal properties of a new class of calamitic mesogens based on substituted 2,5‐diaryl‐1,3,4‐thiadiazole derivatives with wide mesomorphic temperature ranges

Liquid crystals based on substituted 2,5‐diaryl‐1,3,4‐thiadiazole derivatives (1a–1f, 3a and 3b) and 1,3,4‐oxadiazole analogues (2a–2f, 4a and 4b) were synthesised and characterised by ¹H, ¹³C nuclear magnetic resonance, Fourier transform infrared, mass spectrometry, high‐resolution mass spectrometry techniques and elemental analyses. The X‐ray crystal structure of 1e revealed that it contains tilted lamellar arrangement of molecules in the crystalline solid. The liquid crystal properties have been investigated by polarised‐light optical microscopy, differential scanning calorimetry and in‐situ variable‐temperature X‐ray diffraction. All compounds (except 2e and 2f) exhibited thermotropic liquid crystal behaviours with various mesophases (smectic A and C, nematic N or soft crystal E phases). Notably, the 1,3,4‐thiadiazole derivatives consistently have wider mesomorphic temperature ranges than those of the respective 1,3,4‐oxadiazole analogues. The solutions of all compounds in CH₂Cl₂ individually displayed one or two absorption bands with λ _max values at 297–355 nm and emitted with λ _max values at 363–545 nm and quantum yields of 0.12–0.73. Structure–property relationships of these compounds are discussed in the contexts of their molecular structures and weak intermolecular interactions.     

Vinyl Polymerization Initiated by Metal Chelates. III. Polymerization of Methyl Methacrylate Initiated by Vanadium(IV) Acetylacetonate Chelates

The polymerization of methyl methacrylate initiated by the vanadium acetylacetonate complex was investigated under a nitrogen atmosphere at 50°C. The effect of concentration of monomer, complex, acid, dioxane, inhibitor, and the effect of temperature on the rate of polymerization were studied. The rate of polymerization was found to increase upon increasing the concentrations of the monomer, the initiator, and the acid. The overall activation energy has been computed from the Arrhenius plot and a suitable kinetic scheme has been proposed.     

Unexpected molecular weight dependence of shish kebab in water‐assisted injection molded HDPE

As a part of continuous efforts to systematically understand the morphological development in water‐assisted injection molding, high density polyethylene with different molecular weights was molded in this study. Unexpectedly, it was found that shish kebab with high lamellar and molecular orientations was formed in the sample with a lower molecular weight (LMW) rather than in the higher one, especially in the water channel layer. Present finding is obviously inconsistent with the general consensus, that is, higher molecular weight (HMW) polymer is much easier to form preferential orientation in flow field than LMW one. Such anomalous phenomenon is explained by the fact that even though melts experienced the same processing, lower shear rate is practically achieved in HMW sample due to its high viscosity. The result indicates that the flow history in industrial processing method is far from that in laboratory one. Copyright © 2012 John Wiley & Sons, Ltd.     

Platinum Ultramicroelectrodes Modified with Electrogenerated Surfactant‐Templated Mesoporous Organosilica Films: Effect of Film Formation Conditions on Its Performance in Preconcentration Electroanalysis

Pt µdisc electrodes have been modified by mesoporous organosilica thin films by electrochemically assisted self‐assembly (EASA) of mercaptopropyltrimethoxysilane (MPTMS), tetraethoxysilane (TEOS), and the surfactant cetyltrimethylammonium bromide (CTAB). The EASA process involves the generation of hydroxide ions at the electrode/solution interface, upon the application of a cathodic current density, leading to TEOS and MPTMS polycondensation around the CTAB template and concomitant growing of a thiol‐functionalized mesoporous film onto the electrode surface. The experimental conditions (current density, deposition time, silane concentration and molar ratio between surfactant template and silane) were optimised to form a thin and permeable film likely to be used in preconcentration electroanalysis. The morphology of the film electrodes were characterised by scanning electron microscopy. The permeability properties of the modified Pt µdisc electrodes have been evidenced by cyclic voltammetry using Ru(NH₃)₆³⁺ as a redox probe. The best parameters identified for the film preparation are a current density of ? 8 mA cm^?2 applied for 15 s in a solution containing 110 mM of hydrolysed silane precursors and 70.4 mM of CTAB. Pt µdisc electrodes modified in these conditions were used for the open‐circuit preconcentration of Hg(II) species prior to their detection by anodic stripping voltammetry in a mercury‐free solution. In the optimized conditions, a sensitivity of 14.3 mA cm^?2 µM^?1 was obtained for the 0.02–0.08 µM concentration range. The analytical performance of such organosilica films could decay by up to two orders of magnitude for the materials prepared in conditions other than the optimized ones, highlighting the need for a fine control of the deposition parameters to elaborate sensors based on such modified ultramicroelectrodes.     

Rapid preparative separation of six bioactive compounds from Gentiana crassicaulis Duthie ex Burk. using microwave‐assisted extraction coupled with high‐speed counter‐current chromatography

A rapid method combining microwave‐assisted extraction (MAE) and high‐speed counter‐current chromatography (HSCCC) was applied for preparative separation of six bioactive compounds including loganic acid ( I ), isoorientin‐4′‐O‐glucoside ( II ), 6′‐O‐β‐d ‐glucopyranosyl gentiopicroside ( III ), swertiamarin ( IV ), gentiopicroside ( V ), sweroside ( VI ) from traditional Tibetan medicine Gentiana crassicaulis Duthie ex Burk. MAE parameters were predicted by central composite design response surface methodology. That is, 5.0 g dried roots of G. crassicaulis were extracted with 50 mL 57.5% aqueous ethanol under 630 W for 3.39 min. The extract (gentian total glycosides) was separated by HSCCC with n‐butanol/ethyl acetate/methanol/1% acetic acid water (7.5:0.5:0.5:3.5, v/v/v/v) using upper phase mobile in tail‐to‐head elution mode. 16.3, 8.8, 12., 25.1, 40.7, and 21.8 mg of compounds I–VI were obtained with high purities in one run from 500 mg of original sample. The purities and identities of separated components were confirmed using HPLC with photo diode array detection and quadrupole TOF‐MS and NMR spectroscopy. The study reveals that response surface methodology is convenient and highly predictive for optimizing extraction process, MAE coupled with HSCCC could be an expeditious method for extraction and separation of phytochemicals from ethnomedicine.     

Ultrasound‐assisted emulsification microextraction combined with injection‐port derivatization for the determination of some chlorophenoxyacetic acids in water samples

An efficient method based on ultrasound‐assisted emulsification microextraction followed by injection‐port derivatization GC analysis was developed to determine 2,4‐dichlorophenoxyacetic acid (2,4‐D) and 4‐chloro‐2‐methylphenoxyacetic acid (MCPA) in natural water samples. In this procedure, 12.5 μL of 1‐undecanol was injected slowly into a 12 mL home‐designed centrifuge glass vial containing an aqueous sample of the analytes located inside an ultrasonic water bath. The resulting emulsion was centrifuged, and 1 μL of the separated organic solvent together with 1 μL of the derivatization reagent were injected into a GC equipped with a flame ionization detector. Several factors that influence the derivatization and extraction were optimized. Under the optimal conditions, the LODs were 0.33 and 1.7 μg/L for MCPA and 2,4‐D, respectively. Preconcentration factors of 670 and 836 were obtained for MCPA and 2,4‐D, respectively. The precision of the proposed method was evaluated in terms of repeatability, which was <5.7% (n = 5). The applicability of the proposed method was evaluated by extraction and determination of chlorophenoxyacetic acids from some natural waters, which indicated that the matrices of natural waters have no significant effect on the extraction and derivatization efficiency of this method.     

Multi‐criteria optimization for ultrasonic‐assisted extraction of antioxidants from Pericarpium Citri Reticulatae using response surface methodology,an activity‐based approach

An activity‐based approach to optimize the ultrasonic‐assisted extraction of antioxidants from Pericarpium Citri Reticulatae (Chenpi in Chinese) was developed. Response surface optimization based on a quantitative composition‐activity relationship model showed the relationships among product chemical composition, antioxidant activity of extract, and parameters of extraction process. Three parameters of ultrasonic‐assisted extraction, including the ethanol/water ratio, Chenpi amount, and alkaline amount, were investigated to give optimum extraction conditions for antioxidants of Chenpi: ethanol/water 70:30 v/v, Chenpi amount of 10 g, and alkaline amount of 28 mg. The experimental antioxidant yield under the optimum conditions was found to be 196.5 mg/g Chenpi, and the antioxidant activity was 2023.8 μmol Trolox equivalents/g of the Chenpi powder. The results agreed well with the second‐order polynomial regression model. This presented approach promised great application potentials in both food and pharmaceutical industries.     

Analysis of volatile oil composition of Citrus aurantium L. by microwave‐assisted extraction coupled to headspace solid‐phase microextraction with nanoporous based fibers

Nanoporous silica was prepared and functionalized with amino propyl‐triethoxysilane to be used as a highly porous fiber‐coating material for solid‐phase microextraction (SPME). The prepared nanomaterials were immobilized onto a stainless steel wire for fabrication of the SPME fiber. The proposed fiber was evaluated for the extraction of volatile component of Citrus aurantium L. leaves. A homemade microwave‐assisted extraction followed by headspace (HS) solid‐phase apparatus was used for the extraction of volatile components. For optimization of factors affecting the extraction efficiency of the volatile compounds, a simplex optimization method was used. The repeatability for one fiber (n = 4), expressed as RSD, was between 3.1 and 8.6% and the reproducibility for five prepared fibers was between 10.1 and 14.9% for the test compounds. Using microwave‐assisted distillation HS‐SPME followed by GC‐MS, 53 compounds were separated and identified in C. aurantium L., which mainly included limonene (62.0%), linalool (7.47%), trans‐β‐Ocimene (3.47%), and caryophyllene (2.05%). In comparison to a hydrodistillation method, the proposed technique could equally monitor almost all the components of the sample, in an easier way, which was rapid and required a much lower amount of sample.