氯化血红素的催化显色反应及分析应用

本文研究了以氯化血红素替代辣根过氧化物酶催化过氧化氢与4-氨基安替比林和苯酚的催化显色反应条件,拟订了测定过氧化氢的高灵敏催化分光光度法,做了多种离子对测定过氧化氢的干扰实验。并通过与葡萄糖氧化酶联用,拟订了水介质和血清中葡萄糖的分光光度测定方法,试用于测定血清样品中的葡萄糖含量得到了较满意的结果。     

Effect of heat treatment on the physico-chemical properties and catalytic activity of manganese nodules leached residue towards decomposition of hydrogen peroxide

The effect of calcination temperature on the physico-chemical characterization of manganese nodule leached residue (MNLR) and water-washed manganese nodule leached residue (WMNLR) has been investigated on the basis of chemical analysis, XRD, TG-DTA, FTIR, surface hydroxyl groups, surface oxygen, reducing and oxidizing sites, surface area. XRD and IR confirm the presence of amorphous iron oxyhydroxides, delta-MnO2, which are converted to alpha-Fe2O3 and gamma-Mn2O3 phases above 400 degrees C of calcination, respectively. A solid solution of Fe2O3 and Mn2O3 is formed above 700 degrees C. The surface area, surface hydroxyl group, surface oxygen, reducing and oxidizing sites increase with the increase in calcination temperature up to 400 degrees C and then decrease with further rise in calcination temperature up to 700 degrees C. The catalytic activity of the sample towards H2O2 decomposition shows the similar trend as surface properties. A suitable Mn(3+)Mn4+ couple favours H2O2 decomposition reaction. The activity has been correlated with various physico-chemical properties.     

PAN共沉淀富集原子吸收测定饮水和人发中的微量锰

使用PAN-Ni(Ⅱ)共沉淀体系分离富集、微量流向进样火焰原子吸收光谱测定饮水和人发中的微量锰。样品中的共存元素不干扰测定，锰的标准加入回收率90%-108%之间。12次重复测定锰含量为0.15μg/mL的试样溶液的变异系数为4.6%,本法简便快捷,取得了较满意的结果.     

Synthesis and Magnetic Properties of Binuclear Mn（Ⅱ）Complexes with Alkoxide Bridge

ＳｙｎｔｈｅｓｉｓａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＢｉｎｕｃｌｅａｒＭｎ（Ⅱ）ＣｏｍｐｌｅｘｅｓｗｉｔｈＡｌｋｏｘｉｄｅＢｒｉｄｇｅＹａｎＳｈｉ－ｐｉｎｇ；ＦａｎＢｏ；ＬｉａｏＤａｉ－ｚｈｅｎｇ；ＪｉａｎｇＺｏｎｇ－ｈｕｉａｎｄＷａｎｇ...     

Substoichiometric isotope dilution determination of manganese in biological smples using 2-thenoyltrifluoroacetone in isobutyl methyl ketone

A substoichiometric isotope dilution method was developed for the determination of microgram amounts of manganese. The method involves the use of carrier-free ⁵⁴Mn with Mn(II) carrier and its complexation with 2-thenoyltrifluoroacetone (TTA) at pH 8.5, the complex then being extracted into isobutyl methyl ketone. A minimum of 50 ng of manganese can be determined. The method was applied to the determination of manganese in several standard reference materials and biological samples such as tea leaves, spices and condiments. The method is simple and fast and yields results with high accuracy and precision.     

Synthesis and manganese complexes of pentagonal bipyramidal ligands: N,N′-disubstituted pentaaza macrocycles

Two novel heptadentate ligands, pentaaza macrocycles with two pendant xpyridyl and phenol groups, were prepared and the crystal structure of the manganese(II) complex of N,N′-bis(2-pyridylmethyl)-pentaaza macrocycle revealed a pentagonal bipyramidal geometry.     

辣根过氧化物酶对心肌线粒体过氧化损伤的保护作用

以黄嘌呤氧化酶／次黄嘌呤自由基诱生系统建立了稳定的离体心肌线粒体的损伤模型，并应用此模型研究辣根过氧化物酶对心肌线粒体自由基氧化损伤的保护作用，结果表明，辣根过氧化物酶能抑制心肌线粒体中氧自由基的形成，降低膜脂的过氧水平，保护了线粒体膜酶活性，有效地防止自由基对线粒体结构和功能的损伤。     

Mn(III)-based C-C bond formation: regioselective α′-allylation of various α,β-unsaturated, α and β-alkoxy α,β-unsaturated ketones

The Manganese(III)-based regioselective α′-keto radical generation of unsaturated ketones is a versatile synthetic procedure with broad applicability. The generated α′-keto radical slowly creates a metal enolate in a solvent at reflux. The resultant metal enolate affords the corresponding α′-allylated α,β-unsaturated ketones in good yields. This method is the first example of the metal mediated regioselective α′-allylation of α,β-unsaturated ketones. The ketones that have α or β-alkoxy groups also work efficiently.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.