锰的催化光度法测定现状与展望

介绍催化光度法测定锰的分析方法，讨论各显色体系中的灵敏度、测定范围和干扰情况，比较了测定锰的显色剂。引用文献58篇。     

Development and application of an integrated system for monitoring ethanol content of fuels

An automated flow injection analysis (FIA) system for quantifying ethanol was developed using alcohol oxidase, horseradish peroxidase, 4-aminophenazone, and phenol. A colorimetric detection method was developed using two different methods of analysis, with free and immobilized enzymes. The system with free enzymes permitted analysis of standard ethanol solution in a range of 0.05–1.0 g of ethanol/L without external dilution, a sampling frequency of 15 analyses/h, and relative SD of 3.5%. A new system was designed consisting of a microreactor with a 0.91-mL internal volume filled with alcohol oxidase immobilized on glass beads and an addition of free peroxidase, adapted in an FIA line, for continued reuse. This integrated biosensor-FIA system is being used for quality control of biofuels, gasohol, and hydrated ethanol. The FIA system integrated with the microreactor showed a calibration curve in the range of 0.05–1.5 g of ethanol/L, and good results were obtained compared with the ethanol content measured by high-performance liquid chromatography and gas chromatography standard methods.     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

酞菁锰-表面活性剂薄膜电极的电化学表征及其对三氯乙酸的电化学催化作用的研究

将酞菁锰（ＭｎＰｃ）掺入阳离子表面活性剂双十二烷基二甲基溴化铵（ＤＤＡＢ）的氯仿溶液，并涂布于热解石墨电极表面，待氯仿挥发后即制得ＭｎＰｃ－ＤＤＡＢ薄膜电极。循环伏安实验表明，在ＫＢｒ溶液中，该薄膜电极有两对还原氧化峰，第一对峰的Ｅｐｃ１＝－０．２７Ｖ，Ｅｐａ１＝０．０１Ｖ；第二对峰的Ｅｐｃ２＝－０．７６Ｖ，Ｅｐａ２＝－０．６２Ｖ（ｖｓ．ＳＣＥ）。本文着重探讨了第二对峰的电化学行为，估计了该体系的电荷传递扩散系数Ｄｃｔ和表观非均相电极反应速率常数Ｋ０′等电化学参数，并可将该薄膜电极用于催化三氯乙酸的电化学还原。     

The new facial tripod ligand 3,3-bis(1-methylimidazol-2-yl)propionic acid and carbonyl complexes thereof containing manganese and rhenium

The new facially coordinating tripod ligand 3,3-bis(1-methylimidazol-2-yl)propionate (bmip) has been studied. A synthetic route to sodium 3,3-bis(1-methylimidazol-2-yl)propionate (Na[bmip], 2a) and its hydrochloride (Hbmip · 2HCl, 2b) is reported. The electronic properties of Hbmip were calculated by DFT methods and are compared to those of structurally similar bis(pyrazol-1-yl)acetic acids. The ligand was applied in the synthesis of the two tricarbonyl complexes [Re(bmip)(CO)₃] (3) and [Mn(bmip)(CO)₃] (4). Methyl 3,3-bis(1-methylimidazol-2-yl)propionate (bmipme) (1), which is the precursor of Hbmip, and the complexes [Re(bmip)(CO)₃] (3) and [Mn(bmip)(CO)₃] (4) were characterised by single crystal X-ray analysis.     

辣根过氧化物酶自组装多层膜结构形貌与活性的研究

用分子沉积自组装作制备了阳离子化和阴离子化的辣根过氧化物酶自组装膜；并用原子力显微镜（AFM）研究了不同离子化辣根过氧化物酶单层及多层自组装膜的形貌结构与自组装膜的活性变化关系。结果表明：阴离子化的辣根过氧化物酶自组装膜的表面形貌比较粗糙，均方根粗糙度（RMS）及酶分子粒径较大，且组装膜的活性比较大。     

Preparation of Mn3O4 nanocrystallites by low-temperature solvothermal treatment of γ-MnOOH nanowires

The preparation of trimanganese tetroxide (Mn₃O₄) nanocrystallites from γ-MnOOH nanowires under mild conditions has been achieved by two steps: first, γ-MnOOH nanowires with a mean diameter of about 12 nm and lengths of up to several micrometers were directly prepared via hydrothermal reaction between KMnO₄ and toluene in water at 180°C for 24 h; then, pure Mn₃O₄ nanocrystallites could be obtained by solvothermal treatment of the γ-MnOOH nanowires in ethylenediamine (EDA) and ethylene glycol (EG) at 150°C for 24 h. It was found that the Mn₃O₄ product obtained in EDA comprised well-defined nanocrystallites with the size in the range of 15-35 nm, while the one obtained in EG consisted of aggregated nanoparticles with the size of less than 18 nm.The possible formation mechanism of nanocrystalline Mn₃O₄ in EDA and EG and reasons for the different effects of various solvents on the products were also proposed.     

Bioimprinted protein exhibits glutathione peroxidase activity

A strategy for design of bioimprinted proteins with glutathione peroxidase (GPX) activity has been proposed. The proteins imprinted with a glutathione derivative were converted into selenium-containing proteins by chemical modifying the reactive hydroxyl groups of serines followed by sodium hydrogen selenide displacement. These selenium-containing proteins exhibited remarkable GPX activities and the GPX activities of reduction of H₂O₂ by glutathione (GSH) were found to be 101-817 U μmol⁻¹, which approaches the activity of a selenium-containing catalytic antibody elicited by a hapten similar to our template. The steady state kinetic study for imprinted protein catalysis revealed Michaelis-Menten kinetics for both H₂O₂ and GSH, e.g. the pesudo-first-order rate constant k_cat (H₂O₂) and the apparent Michaelis constant K_m (H₂O₂) at 1 mM GSH were calculated to be 784 min⁻¹ and 1.24×10⁻³ M, respectively, and the apparent second-order rate constant k_cat (H₂O₂)/K_m (H₂O₂) was determined to be 6.33×10⁵ (M min)⁻¹. The kinetics and the template inhibition showed that the strategy might be a remarkably efficient one for generating artificial enzyme with GPX activity.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

锰（Ⅱ）—邻菲口罗啉配合物极谱吸附波及其应用

在ｐＨ９．５ＮＨ３ＮＨ４Ｃｌ缓冲溶液中，Ｍｎ（Ⅱ）与邻菲口罗啉形成的配合物在－１．３６Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的吸附波，一阶导数峰电流与Ｍｎ（Ⅱ）浓度在５×１０－８５×１０－６ｍｏｌ／Ｌ范围内呈线性关系，检出限为２×１０－８ｍｏｌ／Ｌ对极谱性质及反应机理进行了研究，用该法测定了大豆和茶叶中的微量锰，结果满意