Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

Calorimetric approach to tetronic/water interactions

Tetronic^®comprises X-shaped copolymers formed by four poly(propylene oxide) (PPO) andpoly(ethylene oxide) (PEO) block chains bonded to an ethylene diamine centralgroup. Micellization behaviour of three representative Tetronics (T304, T904and T1307) was characterized to gain an insight into the interactions betweenthe copolymer unimers and the state of water in their solutions. The enthalpyof demicellization, recorded at 37°C in an isoperibol microcalorimeter,indicated that the process was in all cases exothermic and the enthalpy rankedin the order T1307≥T904>>T304. Micellization is entropy-driven owing tohydrophobic interactions between the PPO chains.DSC analysisshowed that the crystallization and melting peaks of the free water remainingin T304 and T904 solutions were progressively shifted toward lower temperaturesas the surfactant proportion increased, owing to a colligative effect. Boundwater corresponded to 3 water molecules per EO repeating unit. In the caseof T1307, which has longer PEO chains, a splitting of the melting peak wasobserved, one peak appearing around 0°C due to free water and anotherat –15°C due to interfacial water. As T1307 proportion raised, theenthalpy of the former decreased, whilst the enthalpy of the latter increased.In 40% T1307 solutions, interfacial water overcame the proportion of freewater; there being 1 interfacial and 3 bound water molecules per EO repeatingunit. Gaussian deconvolution of FTIR spectra also enabled to characterizethe evolution of free water as a function of Tetronic proportion. The dependenceof micellization and water interaction behaviour on Tetronics structure shouldbe taken into account to use these copolymers as drug solubilizers and micellarcarriers.     

过氧化物模拟酶在介体型生物传感器方面应用初探

meso-四(4-磺基苯)卟啉锰(Ⅲ)作为过氧化物模拟酶可催化H_2O_2与K_4Fe(CN)_6反应。电流响应与H_2O_2浓度在3.0×10~(-4)～1.0×10~(-3)mol/L范围内呈线性关系。重现性和回收率良好。抗坏血酸和DL-半胱氨酸干扰严重。     

草酸锰分解过程的机理函数判别和动力学研究

用等温热重和线性升温热重分析法研究了草酸锰热分解过程,提出了判断其机理函数的3步判别法。经实验和理论分析证明,该反应受随机成核和晶核随后生长的过程(A_3a机理)支配,其活化能E=103.95 kJ/mol,频率因子A=4.448×10~8min~(-1).动力学补偿效应为IgA=0.09661E-1.2856     

Spectral studies of bridged bisindenylmetallocenes and products of their reactions with polymethylalumoxane in toluene and dichloromethane in the visible region

Quantitative characteristics of changes in the energy of charge transfer from -bonded ligands to metal are presented for the series of structurally similar ansa-metallocene complexes of IVB Group elements. The changes are caused by the solvation effect, replacement of -bonded chlorine ligands by methyl groups and of bridging ethylene groups by dimethylsilylene moieties, introduction of the methyl substituent into position 2 and phenyl substituent into position 4 of the indenyl system, variation of the transition metal in metallocene, and formation of complexes with polymethylalumoxane (MAO) at different Al_MAO/Zr ratios. These effects are found to be additive.     

CO氢化催化剂表面活性位的动态法研究

用程序升温表面反应(TPSR)和程序升温还原(TPR)以及过渡应答(TR)等动态手段研究Ni/Al_2O_3催化剂表面上CO氢化反应的活性位状况。结果表明, 催化剂表面存在两种类型的活性位。其中A位来自表面上的聚晶体Ni, B位来自Ni与载体Al_2O_3强相互作用形成的Ni-Al化合物。实验结果还表明, CO在两个活性位都有吸附, 但在有H_2参与的条件下, 会影响二个活性位上的CO吸附量。     

氧化苯乙烯和氧化二苯乙烯的区域选择性和立体选择性开环

本文报道 NaBH_4-CoCl_2可使氧化苯乙烯类化合物发生区域选择性开环,主要生成β-苯乙醇衍生物。对于氧化二苯乙烯类化合物,由于受到苯环的空间阻碍,使其开环能力减弱,如反式氧化二苯乙烯比顺式异构体更难于开环。     

铁／锌催化剂的物相结构及其还原行为的穆斯堡尔谱研究

以Mossbauer谱为手段,研究了用于F-T合成的Fe/Zn催化剂的物相结构,并考察了组成及制备方法的影响,同时还对其还原、碳化行为进行了探讨.发现锌对铁的还原有抑制作用,它能够稳定二价铁不被进一步还原.研究还表明,我们所研制的Fe/Zn催化剂是一种高分散度的铁锌化合物,室温下具有超顺磁特性.     

聚2,6-二甲基苯醚树脂分子量分布及其与冲击强度关系的研究

本工作建立了室温下用凝胶色谱法(GPC)测定聚2,6-二甲基苯醚(PPO)树脂分子量、分子量分布的方法。淋洗剂不采用文献申报道的毒性较大者,也不在较高柱温下进行,而采用甲苯(或氯仿)在室温下测定。对样品在甲苯中溶解温度、浓度和稳定性等都进行了系统研究,找到了最优化条件。GPC数据结合改性PPO(MPPO)产品性能测定结果,经仔细分析找到了影响MPPO产品质量的一个重要因素是PPO树脂中低分子量部分含量。它与产品冲击强度有明显的依赖关系。提出了一个从CPC谱图确定低分子量部分含量的方法。