Synthesis and Magnetic Properties of Binuclear Mn（Ⅱ）Complexes with Alkoxide Bridge

ＳｙｎｔｈｅｓｉｓａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＢｉｎｕｃｌｅａｒＭｎ（Ⅱ）ＣｏｍｐｌｅｘｅｓｗｉｔｈＡｌｋｏｘｉｄｅＢｒｉｄｇｅＹａｎＳｈｉ－ｐｉｎｇ；ＦａｎＢｏ；ＬｉａｏＤａｉ－ｚｈｅｎｇ；ＪｉａｎｇＺｏｎｇ－ｈｕｉａｎｄＷａｎｇ...     

Substoichiometric isotope dilution determination of manganese in biological smples using 2-thenoyltrifluoroacetone in isobutyl methyl ketone

A substoichiometric isotope dilution method was developed for the determination of microgram amounts of manganese. The method involves the use of carrier-free ⁵⁴Mn with Mn(II) carrier and its complexation with 2-thenoyltrifluoroacetone (TTA) at pH 8.5, the complex then being extracted into isobutyl methyl ketone. A minimum of 50 ng of manganese can be determined. The method was applied to the determination of manganese in several standard reference materials and biological samples such as tea leaves, spices and condiments. The method is simple and fast and yields results with high accuracy and precision.     

Synthesis and manganese complexes of pentagonal bipyramidal ligands: N,N′-disubstituted pentaaza macrocycles

Two novel heptadentate ligands, pentaaza macrocycles with two pendant xpyridyl and phenol groups, were prepared and the crystal structure of the manganese(II) complex of N,N′-bis(2-pyridylmethyl)-pentaaza macrocycle revealed a pentagonal bipyramidal geometry.     

Mn(III)-based C-C bond formation: regioselective α′-allylation of various α,β-unsaturated, α and β-alkoxy α,β-unsaturated ketones

The Manganese(III)-based regioselective α′-keto radical generation of unsaturated ketones is a versatile synthetic procedure with broad applicability. The generated α′-keto radical slowly creates a metal enolate in a solvent at reflux. The resultant metal enolate affords the corresponding α′-allylated α,β-unsaturated ketones in good yields. This method is the first example of the metal mediated regioselective α′-allylation of α,β-unsaturated ketones. The ketones that have α or β-alkoxy groups also work efficiently.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Synthesis and Characterization of a New Layered Aluminophosphate [Al3P4O16][(CH3)2NHCH2CH2NH(CH3)2][H3O]

A new layered aluminophosphate, denoted AlPO-CJ12, has been synthesized in the system Al(OPrⁱ)₃-H₃PO₄-tetramethylethylenediamine-triethyleneglycol and its structure solved by single-crystal X-ray diffraction analysis. It is further characterized by X-ray powder diffraction, ICP, TG, DTA, and elemental analyses. The compound has an empirical formula of [Al₃P₄O₁₆][(CH₃)₂NHCH₂CH₂NH(CH₃)₂][H₃O], and crystallizes in the triclinic space group P-1 (No. 2) with a=8.9907(6) Å b=9.8359(6) Å, c=14.5566(8) Å, α=75.872(3)°, β=88.616(3)°, γ=63.404(3)°, Z=2, R₁=0.0451, and wR₂=0.1094. The alternation of tetrahedral AlO₄ and PO₃ (=O) units forms a sheet structure with a 4×6×8 network. The inorganic layers stacked in an AAAA sequence are held together by the protonated organic amine and water molecules. The co-templating role of the water molecules is studied by the calculation of the nonbonding host-guest interaction energies through a computational simulation.     

Phase separation and disorder in half metallic ferromagnetic manganite thin films: A theoretical study looking forward low noise nano-devices

The resistivity of thin La_0.7Sr_0.3MnO₃ films was first investigated in a wide temperature (T) range (10–750 K). Films grown by different techniques and on several substrates enabled to analyze samples with different amounts of disorder. The aim of this work was to elucidate the nature of the metal–insulator (M–I) transition occurring at T = T_p in these films and its relation with the different kinds of inhomogeneities they could present like intrinsic electric disorder and co-existence of two different electrical and/or magnetic phases. The low-temperature resistivity state was described mostly by a law which scales as T with  ≈ 2.5. This supports the theoretical proposal of single magnon scattering in presence of minority spin states localized by the disorder. In the whole range of temperatures the experimental data are found to be consistent with a phase separation (PS) scenario. In order to go through the origin of the characteristic length scale of inhomogeneity found, preliminarily low frequency noise measurements as a function of T in a range of temperature around the M–I transition were made. The samples used were patterned using photolithography into bridges with various widths and lengths. No clear sign of separation phase dynamic has been observed in our noise measurements. Unexpectedly the normalized Hooge parameter _H/n was found not to be volume (Ω) independent. The LSMO electrical properties may strongly be driven by disorder and new design for magnetoresistance sensors may have to take into account their intrinsic PS.     

SYNTHESIS OF CONDUCTIVE POLYANILINE VIA OXIDATION BY MnO2

A unique process of chemical oxidation polymerization of aniline using manganese dioxide (MnO2) as the oxidizing agent in an aqueous medium is described. The reaction between aniline and MnO2 follows a mechanism by which the organic monomer is oxidized while the metal oxide undergoes reductive dissolution. The effects of the amount of oxidizing agent and aniline, pH and temperature of the reactive system, type of acid on the yield and conductivity of polyaniline are discussed. The resulting polyaniline was characterized by [R and UV-Vis spectrometry. Polyaniline with a conductivity of 12.5 S/cm was obtained using 0.033 tool of aniline oxidized by 0.023 tool MnO2 in the presence of 100 mL of 2.7 mol/L HCI at 25℃ for 4 h.     

Application of manganese(IV) dioxide microcolumn for determination and speciation of nitrite and nitrate using a flow injection analysis-flame atomic absorption spectrometry system

A flow injection (FI) method with flame atomic absorption spectrometry (FAAS) detection was developed for the determination and speciation of nitrite and nitrate in foodstuffs and wastewaters. The method is based on the oxidation of nitrite to nitrate using a manganese(IV) dioxide oxidant microcolumn where the flow of the sample through the microcolumn reduces the MnO₂ solid phase reagent to Mn(II), which is measured by FAAS. The absorbance of Mn(II) are proportional to the concentration of nitrite in the samples. The injected sample volume was 400 μL with a sampling rate of analyses was 90 h⁻¹ with a relative standard deviation better than 1.0% in a repeatability study. Nitrate is reduced to nitrite in proposed FI-FAAS system using a copperized cadmium microcolumn and analyzed as nitrite. The calibration curves were linear up to 20 mg L⁻¹ and 30 mg L⁻¹ with a detection limit of 0.07 mg L⁻¹ and 0.14 mg L⁻¹ for nitrite and nitrate, respectively. The results exhibit no interference from the presence of large amounts of ions. The method was successfully applied to the speciation of nitrite and nitrate in spiked natural water, wastewater and foodstuff samples. The precision and accuracy of the proposed method were comparable to those of the reference spectrophotometric method.