Manganese(III) Acetate Catalyzed Oxidative Radical Additions of α‐Dicarbonyl Compounds to 1‐ and 2‐Phenylcyclohepta‐1,3,5‐triene

Manganese(III) acetate catalyzed oxidative radical‐addition reactions of α‐dicarbonyl compounds such as methyl acetoacetate ( 6 ), acetylacetone ( 7 ), and dimedone ( 8 ) to the mixture of 1‐ and 2‐phenylcyclohepta‐1,3,5‐triene ( 4 and 5 ) were investigated (Scheme 1). The 1‐phenylcyclohepta‐1,3,5‐triene ( 4 ) formed mainly [2+3] and [4+3] dihydrofuran addition products derived from cycloheptatriene and [2+3] dihydrofuran addition products derived from the norcaradiene structure. The 2‐phenylcyclohepta‐1,3,5‐triene ( 5 ) formed mainly [6+3] dihydrofuran addition products derived from cycloheptatriene and [4+3] dihydrofuran addition products derived from the norcaradiene structure. The structures of isolated products were established by their spectroscopic data (IR, ¹H‐ and ¹³C‐NMR, MS, and elemental analysis) and comparison with literature data. The formation mechanism of the products is discussed.     

Ethanol synthesis from syngas on Mn- and Fe-promoted Rh/γ-Al2O3

The catalytic hydrogenation of CO was studied over Mn- and/or Fe-promoted Rh/γ-Al₂O₃ catalysts. The catalysts were characterized by means of XRD, BET, H₂-TPR·H₂-TPD, XPS and DRIFTS. CO hydrogenation results showed that the doubly Mn- and Fe-promoted Rh/γ-Al₂O₃ catalysts exhibited superior catalytic activity and better ethanol selectivity. The DRIFTS results showed that Mn promoter stabilized the adsorbed CO on Rh⁺ and Fe stabilized adsorbed CO on Rh⁺ and Rh⁰, especially Rh⁰. The fact that doubly Mn- and Fe-promoted Rh/γ-Al₂O₃ owned more (Rhx⁰–Rhy⁺)–O–Fe³⁺·(Fe²⁺) active species was proposed to be a crucial factor accounting for its higher ethanol selectivity.     

Neue neutrale und kationische Mono‐Aziridin‐Komplexe des Typs [CpMn(CO)2Az], [CpCr(NO)2Az]+ und [(Ph3P)(CO)4ReAz]+ über CO‐, Hydrid‐ und Chlorid‐Abspaltungsreaktionen

Novel Neutral and Cationic Mono‐Aziridine Complexes of the Type [CpMn(CO)₂Az], [CpCr(NO)₂Az]⁺, and [(Ph₃P)(CO)₄ReAz]⁺ via CO‐, Hydride‐, and Chloride‐Elimination Reactions The monoaziridine complexes 1 — 5 are obtained by three differently induced substitution reactions. The photolytically induced CO substitution reaction of [CpMn(CO)₃] with 2, 2‐dimethylaziridine leads to the neutral N‐coordinate aziridine complex [Cp(CO)₂Mn{$\overline{N(H)CMe₂C}$ H₂}] ( 1 ). The protonation of [(Ph₃P)(CO)₄ReH] with CF₃SO₃H and consecutive treatment with 2, 2‐dimethylaziridine or 2‐ethylaziridine gives the salt‐like aziridine complexes [(Ph₃P)(CO)₄Re{$\overline{N(H)CMe₂C}$ H₂}](CF₃SO₃) ( 2 ) or [(Ph₃P)(CO)₄Re{ H₂}](CF₃SO₃) ( 3 ) by hydride elimination reactions. The like‐wise salt‐like complexes [Cp(NO)₂Cr{$\overline{N(H)CMe₂C}$ H₂}](BF₄) ( 4 ) and [Cp(NO)₂Cr{ H₂}](CF₃SO₃) ( 5 ) are synthesized from [CpCr(NO)₂Cl] by chloride elimination with AgX (X = BF₄, CF₃SO₃) in the presence of 2, 2‐dimethylaziridine or 2‐ethylaziridine, respectively. As a result of X‐ray structure analyses, the metal atoms are trigonal pyramidally ( 1, 4, 5 ) or octahedrally ( 2, 3 , cis‐position) configurated; the intact three‐membered rings coordinate through the distorted tetrahedrally configurated N atoms. All compounds 1‐5 are stable with respect to the directed thermal alkene elimination to give the corresponding nitrene complexes; the IR, ¹H‐ and ¹³C{¹H}‐NMR, and MS spectra are reported and discussed.     

Evidence of a Photo‐Radical Pathway Responsible of the Rearrangement of a Manganese(III)‐Schiff Base Complex in Solution

A new Mn^III‐Schiff base complex, [MnL(OH₂)](ClO₄) ( 1 ) (H₂L = N, N′‐bis‐(3‐Br‐5‐Cl‐salicylidene)‐1, 2‐diimino‐2‐methylethane), an inorganic model of the catalytic center (OEC, Oxygen Evolving Complex) in photosystem II (PSII), has been synthesized and characterized by elemental analysis, IR and EPR spectroscopy, mass spectrometry, magnetic susceptibility measurement and the study of its redox properties by cyclic and normal pulse voltammetry. This complex mimics reactivity (showing a relevant photolytic activity), and also some structural characteristics (parallel‐mode Mn^III EPR signal from partially assembled OEC cluster) of the natural OEC. The complex 1 was found to rearrange in solution into a crystallographically solved square‐pyramidal complex, [MnLL′] ( 2 ) (HL′ = 6‐bromo‐4‐chloro‐2‐cyanophenol), through a process, which probably liberates radical species (detected by EPR), and provokes a C—N bond cleavage in the ligand. A photo‐radical mechanism is discussed to explain this rearrangement.     

Thermal investigation of iron(III) and manganese(II,III) complexes of dianils derived from 6-formylkhellin

Manganese and iron complexes of Schiff bases derived from 6-formylkhellin were prepared and characterized. Complexes of o-phenylenediamine derivative (ligand (I)) are monomeric or dimeric whereas those of p-phenylenediamine derivative (ligand (II)) are polymeric. The complexes obtained are characterized by a lower magnetic moment values. The complexes also have different solvent of crystallization with different nature of interaction. The thermal behaviour of the ligands and their metal complexes was investigated by means of DTA, TG, IR and X-ray diffraction spectroscopy. Ligand (I) shows different thermal behaviour from that of ligands (II) and (III). The complexes of ligand (II) give abnormal oxides as a final product during their thermal decomposition. This revised version was published online in August 2006 with corrections to the Cover Date.     

Cathodic stripping voltammetry of trace Mn(II) at carbon film electrodes

A sensitive voltammetric method is presented for the determination of tract levels of Mn (II) using carbon film electrodes fabricated from carbon resistors of 2 Ω. Determination of manganese was made by square wave cathodic stripping voltammetry (CSV), with deposition of manganese as manganese dioxide. Chronoamperometric experiments were made to study MnO₂ nucleation and growth. As a result, it was found to be necessary to perform electrode conditioning at a more positive potential to initiate MnO₂ nucleation. Under optimised conditions the detection limit obtained was 4 nM and the relative standard deviation for eight measurements of 0.22 nM was 5.3%. Interferences from various metal ions on the response CSV of Mn(II) were investigated, namely Cd(II), Ni(II), Cu(II), Cr(VI), Pb(II), Zn(II) and Fe(II). Application to environmental samples was demonstrated.     

Kinetic spectrophotometric determination of trace manganese (II) with dahlia violet in nonionic microemulsion medium

A new catalytic kinetic spectrophotometric method has been developed for the determination of trace amount of manganese (II) in nonionic microemulsion medium. The method is based on the catalytic effect of manganese (II) on the oxidation of dahlia violet by potassium periodate with nitrilotriacetic acid as an activitor in the presence of nonionic microemulsion. Under the optimum conditions, the calibration graph is linear in the range of 0.0004-0.0056 μg ml⁻¹ of manganese (II) at 580 nm. The detection limit achieved is 3.75×10⁻⁵ μg ml⁻¹. Manganese (II) in foodstuff samples was determined with satisfactory results.     

On-line determination of manganese in solid seafood samples by flame atomic absorption spectrometry

Manganese is extracted on-line from solid seafood samples by a simple continuous ultrasound-assisted extraction system (CUES). This system is connected to an on-line manifold, which permits the flow-injection flame atomic absorption spectrometric determination of manganese. Optimisation of the continuous leaching procedure is performed by an experimental design. The proposed method allows the determination of manganese with a relative standard deviation of 0.9% for a sample containing 23.4 μg g⁻¹ manganese (dry mass). The detection limit is 0.4 μg g⁻¹ (dry mass) for 30 mg of sample and the sample throughput is ca. 60 samples per hour. Accurate results are obtained by measuring TORT-1 certified reference material. The procedure is finally applied to mussel, tuna, sardine and clams samples.     

Insulator–metal transition in Nd0.8Na0.2Mn(1−x)CoxO3 perovskites

The electric and magnetic properties of the perovskites Nd_0.8Na_0.2Mn_(1−x)Co_xO₃ (0x0.2) prepared by the usual ceramic procedure were investigated. The insulator-to-metal-like (IM) transition, closely related to a ferromagnetic arrangement, was revealed for the composition of x=0.04 and a similar tendency was detected for x=0. The insulating behavior persists down to low temperatures for higher contents of cobalt ions in spite of the transition to the bulk ferromagnetism. The properties are interpreted in terms of the steric distortion, tilting of the Mn(Co)O₆ octahedra and the double-exchange interactions of the type Mn³⁺–O²⁻–Mn⁴⁺and Mn^3.5+δ–O²⁻–Co²⁺, respectively. Presence of antiferromagnetic domains in the ferromagnetic matrix for the most of cobalt-substituted samples is supposed.     

Metallorganische Lewis-Säuren. XLII. Carbonyl- und Nitrosyl-Komplexe von Mangan und Rhenium mit schwach koordinierten Anionen (Ph3P)2(ON)2MnX, (Ph3P)n(OC)5–nMX (M = Mn,Re; n = 1, 2; X = FBF3, OSO2CF3, OSO2F,OCORf)

Organometallic Lewis Acids. XLII. Carbonyl- and Nitrosyl Complexes of Manganese and Rhenium of Weakly Coordinated Anions (Ph₃P)₂(ON)₂MnX, (Ph₃P)_n(OC)_5–nMX (M = Mn, Re; n = 1, 2; X = FBF₃, OSO₂CF₃, OSO₂F, OCOR_f) The complexes (Ph₃P)₂(ON)₂MnX (X = FBF₃, OSO₂CF₃, OSO₂F, OCOCF₃, OCOC₃F₇) and (Ph₃P)_n(OC)_5–nMX (M = Mn, Re; n = 1, 2; X = FBF₃, OSO₂CF₃) have been obtained by reaction of (Ph₃P)₂(ON)₂MnH and (Ph₃P)_n(OC)_5–nMeMe with the corresponding acids HX or from (Ph₃P)_n(OC)_5–nReBr (n = 1, 2) with silver salts AgX, respectively. The compounds have been characterized by their IR and partially by ¹⁹F-NMR data. An efficient method for the preparation of the hydride (Ph₃P)₂(ON)₂MnH is reported.