互联网B/S架构交互式软件在核心概念教学中的应用*——以国际IB课程中“电解质”内容为例

基于核心概念教学的思路,国际IB课程互联网B/S架构交互式软件能够使学生围绕“电解质”核心概念,通过自行操作软件获得多个从微观到宏观、定性与定量相结合、可视化的实验证据,有利于学生深度理解概念与概念之间的逻辑和发展关系,促进学科知识系统框架的形成。     

面向产出的高分子化学课程教学大纲的构建*

基于工程教育认证的核心理念,制定了面向产出的高分子化学课程教学大纲。与传统课程教学大纲不同,本大纲的课程目标是使学生具备推演、阐述、分析和研究高分子材料领域复杂工程问题的能力,体现以学生为中心、面向产出和持续改进的理念。课程教学内容既包含知识点又包含能力要求,强调课程知识点与学生能力达成的支撑关系。在课程考核部分,提出了分目标模块化的考核方法和评分标准,满足了工程认证可衡量、易操作的考核要求。     

Urea Detection of Electrochemical Transistor Sensors based on Polyanline (PANI)/MWCNT/Cotton Yarns

A cotton yarn biosensor based on electrochemical transistor functionalized with MWCNT and PANI was developed for the detection of urea. The transistors based on PANI/MWCNT/cotton yarns under optimized MWCNT concentration has been obtained, which exhibited high on/off current ratio, fast response time, and good operational stability. A transistor-based urea sensor was prepared from PANI/MWCNT/cotton yarns, which could monitor urea in the 1 nM–1 mM linear range with the correlation coefficient of 0.9716. Furthermore, the sensor showed superior reproducibility and high specificity. The practical applications of the proposed sensor were also confirmed. These results indicate the flexible transistor can be used as an efficient platform for biological detection in body fluids.     

Preparation of modified multi‐walled carbon nanotubes as a reinforcement for epoxy shape‐memory polymer composites

Effectively improving the mechanical properties and thermal resistance of epoxy shape‐memory polymers (ESMPs) without affecting their shape‐memory performance is necessary to expand these polymers in practical applications. In this article, modified multi‐walled carbon nanotubes (MWCNTs) were prepared and used as efficient reinforcement for enhancing the comprehensive properties of ESMPs. Increases of nearly 289% to 444% for impact strength and 112% to 184% for tensile force were obtained by adding only 0.1 to 1 wt% epoxy‐modified MWCNTs. The addition of unmodified and carboxyl‐modified MWCNTs was also investigated but showed less impact on the mechanical properties of the ESMPs than epoxy‐modified MWCNTs. Thermogravimetry analysis (TGA) and dynamic mechanical analyses (DMA) showed that less than 1 wt% modified MWCNTs can enhance the heat resistance of ESMPs greatly. Although the shape recovery time for composite materials increased upon adding the MWCNTs, the entire recovery time was still less than 1 minute, and the shape recovery rate was relatively high, nearly 100%.     

Large Nonlinear Optical Activity of a Near-infrared-absorbing Bithiophene-based Polymer with a Head-to-head Linkage

Although the production of near-infrared (NIR)-absorbing organic polymers with an excellent nonlinear optical (NLO) response is vital for various optoelectronic devices and photodynamic therapy, the molecular design and relevant photophysical investigation still remain challenging. In this work, large NLO activity is observed for an NIR-absorbing bithiophene-based polymer with a unique head-to-head linkage in the NIR region. The saturable absorption coefficient and modulation depth of the polymer are determined as ∼−3.5×10⁵ cm GW⁻¹ and ∼32.43%, respectively. Notably, the polymer exhibits an intrinsic nonlinear refraction index up to ∼−9.36 cm² GW⁻¹, which is six orders of magnitude larger than that of CS₂. The maximum molar-mass normalized two-photon absorption cross-section (σ₂/M) of this polymer can be up to ∼14 GM at 1200 nm. Femtosecond transient absorption measurements reveal significant spectral overlap between the 2PA and excited state absorption in the 1000–1400 nm wavelength range and an efficient triplet quantum yield of ∼36.7%. The results of this study imply that this NIR-absorbing polymer is promising for relevant applications.     

表面活性剂及水溶性功能高分子的NMR研究

核磁共振（NMR）技术是研究表面活性剂在溶液中聚集状态的一种非常有用的工具,本文运用多种NMR技术研究了几种不同类型表面活性剂及水溶性功能高分子在水溶液中的聚集行为： 1. 季铵盐型双子表面活性剂16-4-16的聚集行为季铵盐型双子表面活性剂N,N′-双(十六烷基二甲基)-α,ω-丁烷溴化铵(16-4-16)分子中联接基团及靠近离子头的质子位于胶束的壳层, 运动受到一定限制. 而距离离子头较远的烷烃链位于胶束的内部,运动相对自由. 与对应的单链表面活性剂十六烷基三甲基溴化铵(CTAB)相比,16-4-16形成的胶束堆积更为紧密. 通过NOESY谱中交叉峰强度的定量计算,认为16-4-16在胶束中分子以上下交错排列的方式形成球形聚集体.  2. 脱氧胆酸钠与十六烷基三甲基溴化铵的相互作用在脱氧胆酸钠(NaDC)溶液中,NaDC质子H3与其他质子不同,其横向弛豫时间(T₂)表现为双指数衰减,表明此质子可能存在两种不同的状态. 实验证明,其它胆酸盐的H3的横向弛豫也呈现双指数衰减. 因此推测在胆酸盐的稀溶液中,3-OH质子和羰基氧之间有可能存在氢键作用,形成了头尾相连的分子对结构.  在NaDC和CTAB的混合溶液中,两者形成1∶1的混合胶束. 用NOESY和ROESY研究混合胶束的结构,显示CTAB的离子头位于NaDC的羧酸基团附近. 这可能是正负离子之间的静电性相互作用的结果.  3. 丙烯酰胺/丙烯酸模板共聚物的微结构研究了不同pH值条件下,丙烯酰胺和丙烯酸共聚物分子在水溶液中的聚集形态. 在酸性溶液中,分子内的氢键致使聚集体形成较为紧密的堆积,侧链的苯氧基团运动受阻;随着溶液pH值的增大,丙烯酸电离产生的阴离子使得分子间的静电斥力增大,分子链变得伸展,分子间的氢键作用导致了聚集体体积变大. 当溶液呈强碱性,丙烯酸完全电离,氢键作用力被破坏,分子呈现自由伸展的状态,侧链的苯氧基团运动相对自由.     

基于表界面反应及优化的锂金属电池研究进展

金属锂具有高理论比容量和低还原电位, 是锂电池阳极的理想材料之一. 但在长期循环充放电过程中, 金属锂因锂枝晶生长会导致出现界面恶化及能量损失严重等问题, 对锂金属电极与电解质表界面反应的优化是一个重要研究方向. 本文介绍了锂枝晶产生的危害, 从分析及抑制锂枝晶沉积两方面综合评述了为解决这一问题所采取的方法, 包括固态电解质界面形成机制和保护机理、 表面改性、 三维锂阳极和液态/固态电解质等方法, 总结了各种方法的优劣势, 并展望锂金属电池在能源领域的研究前景.     

超浸润形状记忆海绵的制备及油-水分离性能

基于反式 1,4-聚异戊二烯(TPI)的形状记忆性能, 以聚氨酯海绵为基底, 包覆TPI制备出了一种具有疏水超亲油特性的三维多孔形状记忆海绵. 由于这种海绵具有良好的形状记忆特性, 可以通过反复按压/恢复过程, 实现对海绵孔径在微米尺寸(约875 μm)与纳米尺寸(约450 nm)间可逆调控. 利用材料特殊的浸润特征及其可控的孔尺寸, 进一步研究了其在油-水分离中的应用. 研究结果表明, 微米尺寸大孔径海绵有利于对不相溶油-水混合物进行快速高效分离, 而纳米尺寸小孔径海绵则有利于对乳液混合物进行分离, 实现了同一材料同时满足不相溶油-水混合物及乳液体系的分离要求.     

碱性介质中氢氧化反应电催化剂的开发:从机理认识到材料设计

阴离子交换膜(AEM)燃料电池因具有使用非贵金属作为催化剂的优点而受到广泛关注.然而,在碱性体系中,AEM燃料电池中氢氧化反应(HOR)的反应动力学比在酸性介质中的慢两个数量级.针对HOR在碱中动力学缓慢的问题,有两种主要的理论来解释,(1)pH相关的氢结合能作为主要影响因素来控制HOR动力学的理论;(2)质子和氢氧根离子的吸附共同作为影响因子来控制HOR在碱性条件下的动力学的双功能理论.本文首先讨论了在碱性电解质中可能的HOR反应机理及其Tafel性能变化.除了传统的Tafel-Volmer和Heyrovsky-Volmer-HOR机理外,还讨论了最新提出的氢氧根离子吸附参与的HOR机理来说明在酸性和碱性介质中HOR机理的差异.然后,总结了具有代表性的碱性HOR催化剂(如贵金属、合金、金属间化合物、镍基合金、碳化物、氮化物等),简要介绍了它们相应的HOR反应机理,从而进一步理解在碱性介质中不同基元反应步骤给HOR性能带来的差异.最后,提出了一种未来设计HOR碱性催化剂的可行性方案,为今后碱性环境下的HOR催化剂设计提供参考.     

Adaptation of electrodes and printable gel polymer electrolytes for optimized fully organic batteries

Despite intensive scientific efforts on the development of organic batteries, their full potential is still not being realized. The individual components, such as electrode materials and electrolytes, are in most cases developed independently and are not adjusted to each other. In this context, we report on the performance optimization of a full-organic solid-state battery system by the mutual adaptation of the electrode materials and an ionic liquid (IL)-based gel polymer electrolyte (GPE). The formulation of the latter was designed for a one-step manufacturing approach and can be applied directly to the electrode surface, where it is UV-cured to yield the GPE without further post-treatment steps. Herein, a special focus was placed on the applicability in industrial processes. A first significant capacity increase was achieved by the incorporation of the IL into the electrode composite. Furthermore, the GPE composition was adapted applying acrylate- and methacrylate-based monomers and combinations thereof with the premise of a fast curing step. Furthermore, the amount of IL was varied, and all combinations were evaluated for their final performance in cells. The latter variation revealed that a high ionic conductivity is not the only determining factor for a good cell performance. Next to a sufficient conductivity, the interaction between electrode and electrolyte plays a key role for the cell performance as it enhances the accessibility of the counter ions to the redox-active sites.