羧酸在笼形聚偕氨肟树脂上吸咐

碱处理笼形聚偕氨肟树脂（BCAO）对羧酸表现出强的吸附能力。一元羧酸在BCAO树脂上以多层吸附为主要特征。二元和三元羧酸则以单层吸附占优势。后者可能是以双阴离子的一个负极吸着在BCAO树脂表面，形成了对其他羧酸阴离子起排斥作用的负离子场。另外，双阴离子也有可能和两个氨基结合形成次级交联，妨碍着其他离子迁移和扩散。     

大孔网状吸附剂在微生物制药分离纯化上的应用

本文介绍了20世纪末高分子吸附剂在β-内酰胺类，肽类、糖苷类，醌类，含氮杂环类，多烯类、蒽环类，大环内酯类，聚醚类和其它新抗生素，免疫抑制剂，酶抑制剂以及蛋白质类药物分离纯化上的应用发展状况。     

SYNTHESIS OF THE POLYSTYRENE-TYPE ADSORBENTS CONTAINING POLAR GROUPS AND THEIR CAPACITIES IN THE ADSORPTION OF STEVIOSIDE AND GYPENOSIDES

Seven polystyrene-type adsorbents (Ⅰ—Ⅶ) were synthesized by the modification of styrene-divinylbenzene copolymer respectively with hydroxymethyl, aminomethyl, methoxymethyl, phenoxymethyl, (4-hydroxy phenoxy)methyl, (4-acetylphenoxy)methyl, and acetyl groups. Their structures were characterized with chemical methods and physical techniques. The adsorption capacities of the adsorbents to stevioside and gypenosides were determined via batch test in which the HPLC method was used for the analysis of Saponin concentration of solution. The results showed that all the adsorbents could adsorb these saponins to a certain extent, but Ⅵ and Ⅶ had large capacities owing to their moderate polarities.     

功能化程序对笼形聚偕氨肟树脂吸附和吸留性质的影响

聚丙烯颗粒在水溶液中与丙烯腈和二乙烯基苯反应,得接枝交联产物（Ⅰ）。Ⅰ被氨肟化再经成笼反应．得笼形聚偕氨肟树脂（Ⅱ）。笼内仅吸留易于除去的溶剂丙酮。若Ⅰ成笼后再氨肟化,所得吸收剂（Ⅲ）将吸留大量的羟胺,它缓慢地释放出来,干扰吸收剂对酸、碱离子或分子吸附容量的测定。Ⅱ对一些离子例如Hg2+和MnO4-的吸附能力与Ⅲ不同,被认为是两者的网络结构不同所致。     

纤维素基磁性聚偕氨肟树脂吸附Mn（Ⅶ）

用酸处理的纤维素基磁性聚偕氨肟树脂（AMAO）在溶液中吸附KMnO4，发生氧化还原反应的几率在2％以下；用碱处理的树脂（BMAO）作吸附剂，KMnO4还原为Mn（OH）4的比例剧增，达到或超过10％，并且与溶液的pH有关。但是，Mn（Ⅶ）被还原为Mn（Ⅳ）的量基本上不受KMnO4起始浓度、吸附剂添加量和吸附时间变化的影响。BMAO树脂吸附KMnO4的量是树脂偕氨肟基含量的5倍以上。超当量吸附现象反映了物理吸附的本质。     

葡聚糖为载体的双亲型LDL吸附剂吸附动力学研究

合成了以葡聚为载体，同时具有亲水性磺酸基和疏水性胆固醇两类配基的新型低密度脂蛋白（LDL）吸附剂。通过对LDL纯溶液中吸附等温线的测试，比较了以Dextran G-75为载体的双亲型LDL吸附剂与单一亲水型磺酸基配基，单一疏水型胆固醇基吸附剂吸附量和亲和吸附系数的关系。对双亲型LDL吸附剂的吸附动力学进行了初步研究，在LDL溶液中，亲水型磺酸基，疏水型胆固醇配基，双亲型LDL吸附剂对LDL的吸附曲线基本上符合Langmuir吸附方程，另外通过高离子强度NaCl洗脱实验，测定了双亲型LDL吸附剂上具有的磺酸基与胆固醇两类基在对低密脂蛋白吸附过程中所起的配合效果，为下一步作用力机制研究提供了参考依据。     

Correlation between excess adsorption data measured for solvent mixture/adsorbent systems and RM values obtained for different solutes chromatographed in binary mobile phases

This paper concerns the application of excess adsorption isotherms, measured for solvent mixture/adsorbent systems, to the characterization of TLC data. For this purpose the excess adsorption isotherms for three liquid mixtures: cyclohexane/ benzene, benzene/acetone, and carbon tetrachloride/ethyl acetate on silica gel at 20°C have been measured. These mixtures have been used as binary mobile phases in TLC measurements. It has been shown for a given solute in binary mobile phase that the quantity R_M is a simple function of the excess adsorption. Parameters of this function have been used to characterize chromatographic systems with binary mobile phases.     

Ammonium tetraphenylborate-naphthalene adsorbent for the preconcentration and trace determination of uranium in standard alloys and synthetic samples using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol by fourth-derivative spectrophotometry

A solid ion-pair material produced from ammonium tetraphenylborate (ATPB) and naphthalene has been used for the preconcentration of uranium from the large volume of its aqueous complex samples. Uranium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) to form a water insoluble, coloured complex. This complex is quantitatively retained on the ATPB-naphthalene adsorbent filled in a column in the pH range 7.0–9.5 and at a flow rate of 2 ml/min. The solid mass from the column is dissolved with 5 ml of dimethylformamide (DMF) and uranium is determined by fourth-derivative spectrophotometry. The calibration curve is linear over the concentration range of 0.13–15.0 g of uranium in 5 ml of the final DMF solution. Seven replicate determinations of 6 g of uranium gave a mean peak height (peak-to-peak signal between 592 nm and 582 nm) of 1.02 with a relative standard deviation of 0.95%. The sensitivity is 0.8419 (d⁴A/d⁴)/(g ml^–1) found from the slope of the calibration curve. The interference of a large number of anions and cations on the estimation of uranium has been studied and the method applied for the determination of uranium in coal fly ash, Zr-base alloy and some synthetic samples corresponding to standard alloys.     

Phosphorus and Heavy Metals Removal from Stormwater Runoff Using Granulated Industrial Waste for Retrofitting Catch Basins

Phosphorus and heavy metals are washed off and transported with stormwater runoff to nearby surface water bodies resulting in environmental and human health risks. Catch basins remain one of the primary gateways through which stormwater runoff and pollutants from urban areas are transported. Retrofitting catch basins to enhance their phosphorus and heavy metal removal can be an effective approach. In this study, aluminum-based water treatment residual (WTR, a non-hazardous byproduct of the water treatment process) was granulated via a green method to serve as a sustainable filter material, called WTR granules, for enhancing the capabilities of catch basins to remove phosphorus and heavy metals. The WTR granules were field tested in a parking lot in Hoboken, New Jersey. Twelve storm events were monitored. The results showed that the WTR granules significantly (p < 0.05) reduced dissolved P, Cu, and Zn, as well as total P, Cu, Pb, and Zn concentrations in stormwater runoff without signs of disintegration. No flooding or water ponding was observed during the implementation. Results suggest the WTR granules are an inexpensive, green filter material that can be used for retrofitting catch basins to remove phosphorus and heavy metals effectively.     

In Vitro and In Vivo Human Body Odor Analysis Method Using GO:PANI/ZNRs/ZIF−8 Adsorbent Followed by GC/MS

Among various volatile organic compounds (VOCs) emitted from human skin, trans-2-nonenal, benzothiazole, hexyl salicylate, α-hexyl cinnamaldehyde, and isopropyl palmitate are key indicators associated with the degrees of aging. In our study, extraction and determination methods of human body odor are newly developed using headspace-in needle microextraction (HS-INME). The adsorbent was synthesized with graphene oxide:polyaniline/zinc nanorods/zeolitic imidazolate framework-8 (GO:PANI/ZNRs/ZIF−8). Then, a wire coated with the adsorbent was placed into the adsorption kit to be directly exposed to human skin as in vivo sampling and inserted into the needle so that it was able to be desorbed at the GC injector. The adsorption kit was made in-house with a 3D printer. For the in vitro method, the wire coated with the adsorbent was inserted into the needle and exposed to the headspace of the vial. When a cotton T-shirt containing body odor was transferred to a vial, the headspace of the vial was saturated with body odor VOCs. After volatile organic compounds were adsorbed in the dynamic mode, the needle was transferred to the injector for analysis of the volatile organic compounds by gas chromatography/mass spectrometry (GC/MS). The conditions of adsorbent fabrication and extraction for body odor compounds were optimized by response surface methodology (RSM). In conclusion, it was able to synthesize GO:PANI/ZNRs/ZIF−8 at the optimal condition and applicable to both in vivo and in vitro methods for body odor VOCs analysis.