Synthesis of Polypyrrole Microtubes with Actinomorphic Morphology in the Presence of a β‐Cyclodextrin Derivative‐Methyl Orange Inclusion Complex

Summary: Polypyrrole (PPy) microtubes with an actinomorphic morphology are synthesized by a chemical method in the presence of an inclusion complex (IC) of mono [6‐deoxy‐6‐(2‐butenedinitrile‐2,3‐dimercapto sodium salt)]‐β‐cyclodextrin (6‐mnt‐β‐CD) with methyl orange (MO) as a dopant in aqueous solution. The morphologies of the obtained PPy were studied using transmission electron microscopy (TEM). It was found that the IC of 6‐mnt‐β‐CD with MO significantly affects the morphology of the resulting PPy.

The morphology of polypyrrole synthesized in the presence of 6‐mnt‐β‐CD/MO, determined by TEM.     

聚吡咯-肝素共聚膜修饰电极对钙离子的响应

研制了聚吡咯-肝素共聚膜修饰电极,并用电化学方法进行了表征。发现该修饰电极对钙离子呈Nernst响应,电极斜率为31.0 mV/pCa,线性范围是5.0×10^-7～5.0×10^-2 mol·L^-1,可用于儿童发样中钙的测定,结果满意,还测定了该修饰电极对其他阳离子的电位选择系数。     

亚硝酸根在磷钼镍杂多酸-聚吡咯膜修饰电极上的伏安行为及其含量测定

研究了亚硝酸根(NO     

Pyrrole-substituted alkyl silanes as new adhesion promoters on oxidic substrates

ω-(Pyrrol-1-yl alkyl) dimethylchlorosilanes with different chain length were synthesized and characterized with IR, NMR and elemental analysis. The growth of self-assembled monolayers of ω-(pyrrol-1-yl alkyl) dimethylchlorosilanes on oxide surfaces has been investigated. The order gradually improved with adsorption time and highly ordered SAMs were obtained for nearly 2 days adsorption time. Characterization of the films has been performed with contact angle measurements, ellipsometry, SPR and grazing incident FTIR. The chemical deposition of polypyrrole on the modified surface was investigated. The thickness of polypyrrole layer was influenced by the concentration of monomer, the deposition time, and the ratio of monomer to oxidant.     

Water-soluble polypyrroles by matrix polymerization: Interpolymer complexes

A new class of water-soluble polypyrroles (PPy) has been developed. This was accomplished by oxidative matrix polymerization of pyrrole (Py) monomer with Ce(IV) in the presence of poly(acrylic acid) (PAA), poly(vinyl pyrrolidone) (PVP), and copolymers (CP) of vinyl pyrrolidone(VP) with acrylic acid (AA) [VP/AA; 25/75 (CP₁), 50/50 (CP₂), 75/25 (CP₃)]. The soluble and insoluble interpolymer complexes were observed according to the nature (and conformation) of polymers in mixture, the ratio of components, and the pH of solutions. The role of PAA, PVP, CP, Py, and Ce(IV) concentrations, the order of component addition, and the pH of the solutions were investigated. The evidence and structural reasons for the formation of soluble interpolymer complexes of PPy with different polymers are discussed. It is proposed that the compactization of the polymer matrix as well as the disturbance of the regularity of reactive groups on the polymer chain decreases the possibility of formation of soluble interpolymer complexes. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1255–1263, 1997     

Theoretical study of sorption-induced bending of polypyrrole films

Polypyrrole films containing perchlorate were electrochemically synthesized and the bending and recovery motion of the films obtained has been investigated. It was found that the thickness of the film and ambient relative humidity (RH) were crucial to the motion of film: An increase of the film thickness decreased the displacement of the bending but increased the bending stress. On the other hand, an increase of the ambient RH decreased both functions. The motion of film was caused by the difference of expansion on both sides of the film owing to anisotropic sorption of water vapor, which could be expressed by the diffusion-limited bending model. The diffusion coefficients calculated from the bending and recovery motion at 25°C, RH 50% were 12.2 × 10⁻⁸ cm² s⁻¹ and 3.5 × 10⁻⁸ cm² s⁻¹, respectively. The maximum expansion of the film surface calculated from the bending curve was about 0.36%. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2237–2246, 1998     

Preparation and characterization of electrostrictive polyurethane films with conductive polymer electrodes

All-polymer electrostrictive soft films were developed for the first time by depositing conductive polymer (polypyrrole) directly on both sides of solution-cast electrostrictive polyurethane elastomer films. The final composite films are flexible with strong adhesion between the polyurethane film and the conductive polymer electrode. The conductivity (sheet resistivity ∼1000 Ω/□), of the polymer electrode is appropriate for its intended use. The compatible interface between the polypyrrole electrode polymer and the electrostrictive polyurethane significantly improves the acoustic and optical transparency of these composite films, compared with using a metal electrode film. The all-polymer films also exhibit comparable dielectric properties to gold-electroded polyurethane films in the temperature range from −40^°C to +80^°C. The temperature range covers the soft segment glass transition temperature of the polyurethane elastomers, which is about −20^°C. The films also show large electric field induced strain responses which are dependent on film thickness and measurement frequency. The electrostrictive characteristics in the all-polymer films show similarities to those of the films with gold electrodes under identical measurement conditions. © 1998 John Wiley & Sons, Ltd.     

自支撑柔性氮掺杂碳织物电极的制备与性能研究

本文以纯棉织物为基底,吡咯单体为氮源,采用简单的原位聚合-高温煅烧的方法制备了自支撑柔性氮掺杂织物（N-CT）. 利用傅立叶红外技术、X射线光电子能谱、比表面积测试、扫描电子显微镜对所得产物进行结构与形貌表征. 结果表明,碳化后聚吡咯主要以纳米碳球包覆在碳织物表面,N-CT电极的比表面积为495.0 m²·g^-1,其含氮量为2.26%. 电化学测试表明,在0.5 A·g^-1的电流密度下N-CT电极的比电容器为256.2 F·g^-1,经过5000次的恒流充放电循环后电容保持率为98.3%,库伦效率保持率在98.8%左右,具有良好的柔性和机械性能.     

Synthesis of RGO/Cu8S5/PPy Composite Nanosheets with Enhanced Peroxidase‐Like Activity for Sensitive Colorimetric Detection of H2O2 and Phenol

In this paper, a novel strategy for the fabrication of reduced graphene oxide (rGO)/Cu₈S₅/polypyrrole (PPy) composite nanosheets with Cu₈S₅ nanoparticles and PPy layer anchored on the surface of rGO as peroxidase‐like nanocatalyst is reported. During the synthesis, graphene oxide (GO)/CuO composite nanosheets are prepared first and used as templates, then the sulfuration of CuO and polymerization of pyrrole are accompanied with the reduction of GO, resulting in ternary rGO/Cu₈S₅/PPy composite nanosheets. The synthesized Cu₈S₅ nanoparticles with a diameter in the range from tens to hundreds of nanometers are dispersed within PPy decorated rGO nanosheets. The resultant ternary rGO/Cu₈S₅/PPy composite nanosheets exhibit a higher peroxidase‐like catalytic activity toward the oxidation of 3,3′,5,5′‐tetramethylbenzidine in the presence of H₂O₂ than GO/CuO and rGO/CuS composite nanosheets, revealing a synergistic effect on their activity. The as‐prepared rGO/Cu₈S₅/PPy platform provides a simple colorimetric approach for the detection of H₂O₂ and phenol with a high sensitivity. This work offers a new way for the fabrication of rGO‐based nanocomposite with superior enzyme‐like activity, which displays great potential applications in biocatalysis and environmental monitoring.